Global industrial control system spare parts manufacturer

1746P2 AB | 1746-P2 Allen Bradley Power Supply

in stock#

  • Brand/ Manufacturer:

    Allen Bradley
  • Dimensions:

    14.5 cm x 14 cm x 8.5 cm
  • Weight:

    0.64 KG
  • Country of Origin: :

    USA
  • Description:

    Allen-Bradley 1746-P2 SLC 500 modular power supply
Mfr. Part Number:

1746-P2

Manufacturer: Allen-Bradley / Rockwell Automation
Description: Allen-Bradley 1746-P2 SLC 500 Rack Mount Power Supply 120/240V AC, 5A
Full Description: Allen-Bradley 1746-P2 SLC 500 Rack Mount Power Supply 120/240V AC, 5A. Nominal Input Voltage: 120 or 220V AC; Input Voltage Range: 85-132V AC, 170-265V AC; Max Inrush Current: 20A; User Output Current: 0.2A @ 24V DC; User Output Voltage Range: 18-30V DC; Backplane Output Current: 5A @ 5V DC, 0.96A @ 24V DC; Frequency: 47-63 Hz; Fuse: 3A, 250V; Wiring: maximum two 14 AWG wires per terminal; Location: 1746 chassis side; Dimensions (HxWxD): 140 x 74 x 145 mm (5.5 x 2.9 x 5.7 in); Weight: 1.1 kg (2.5 lb).
UPC / GTIN: 10662468088326
Status: Current Product

Description: The Allen-Bradley 1746-P2 is a SLC 500 Power Supply. This Power Supply has a nominal Input Voltage of 120/220 Volts AC. It has an internal Current capacity of 5 A at 5V dc 0.96 A at 24V dc. It provides a 24VDC voltage output with built-in fuse protection.


Click to get price :    : [email protected]     : +86 18020776786

                                      : live:onlywnn_1                        : mooreplc


Moore Automation Limited is not affiliated with or a distributor for Allen Bradley. The depiction, description, or sale of products featuring names, trademarks, brands, and logos is for identification and/or reference purposes only and does not indicate any affiliation with or authorization by any rights holder.

The Allen-Bradley 1746-P2 is an SLC 500 modular power supply. It comes with an input voltage of 85-132 or 170-265V AC at 47-63 Hz. Its internal current capacity at 5V is 5 A and it is 0.96 A at 24V. This power supply also comes with a maximum user-supplied overcurrent protection of 15 A and a maximum inrush current of 20 A. It has a 180 VA typical line power requirement and an input terminal and backplane isolation of 1800V AC RMS for 1 s. User-power current capacity at 24V DC is 200 mA and the user-power voltage range of the power supply, also at 24V DC, is 18-30V DC.

It has a maximum of two AWG wires per terminal. Fuse protection is present with the 1746-P2 power supply but it is limited to guarding against fire hazards due to short-circuit conditions. It comes with an open-type enclosure and can only be installed in a 1746 chassis. The entire power supply measures 5.5 x 2.9 x 5.7 inches and weighs 1.1 kg or 2.5 lbs. Its operating temperature is from 0-60 Deg. Celsius.
This power supply module has a jumper terminal that is used to set the input voltage to be applied to the device.

When undervoltage operation happens, the 1746-P2 power supply will continue to power up the SLC 500 controllers for a short period. When the power supply continues to receive input voltage that is lower than the recommended operating range for a period of time longer than the CPU hold-up time, the controllers will turn off. It will only resume operations automatically when the power supply receives the recommended operating input voltage.

For overcurrent conditions, the 1746-P2 Series A and B will undergo a power supply shutdown and CPU fault. The recovery procedure is to reload the user program. For the 1746-P2 Series C, it will have a 24V DC user shutdown but the CPU continues its operation and the recovery procedure is to correct the overcurrent condition.

The 1746-P2 is a Power supply module primarily designed for use with the SLC 500 automation system platform. This power supply is installed in the leftmost of the SLC chassis.

The installation location of this power supply is not included in the slot count. The slot counting starts with Slot Zero (0) which is reserved for the Programmable Logic Controller’s (PLC) processor or SLC 500 communication adapter.

When the front cover of the power supply is opened, the power supply’s front panel is exposed. This power supply has Five (5) terminals, jumper pins and internal fuse. These terminals are designed to accommodate AC line connection and DC power connection. One terminal function as ground terminal. The internal fuse has an equivalent part number replacement of 1746-F2. The jumper pins are used to set the correct input voltage setting, whether 100/120 VAC or 200 / 240 VAC.

Avoid electrical arc when working with the power supply. Disconnecting or connecting a wire with active supply may produce an electric arc which may damage the electronic backplane. It is important to perform operation when the input power is inactive. The power supply module itself is sensitive to voltage surges that may occur when starting high-inductive electrical loads. To avoid damage to the power supply module, isolation transformer may be installed to prevent voltage surges from entering the power supply.

This power supply features a hold-up time of 20 ms (full load) 3000 ms (no load). This feature allows the PLC processor to continue functioning even when power supply input voltage falls below the nominal supply level.



If you need other brands products like below, please feel free write email to [email protected] 

You will get Best price and Professional service (24/7)

Manufacturer

Rockwell Automation

CPU Hold up time

20 ms (full load) 3000 ms (no load)

Brand

Allen-Bradley

Backplane Current (24 Volts)

0.46 Amps

Part Number/Catalog No.

1746-P2

Frequency

47 to 63 Hertz

Series

SLC 500

Location

1746 Chassis

Module Type

Power Supply

UPC

10662468088326

Input Power

70 Watts

Weight

1.1 kg or 2.5 lbs.

Input Voltage

120 to 220 Volts AC

UNSPSC

32151706

Typical line power requirement

180VA

Dimensions

5.5 x 3.3 x 5.7 inches

Inrush Current

20 Amps

Operating Temperature

0 to 60 Celsius

Backplane Current (5 Volts)

5 amps

Fuse Protection

1746-F1 or equivalent

Internal Current Capacity

5 A at 5V dc; 0.96 A at 24V dc

Programming Software

RSLogix 500

Output Voltage Range

18 to 30 Volts DC

The Allen-Bradley 1746-P2 is a SLC 500 Power Supply. This Power Supply has an Input Voltage of 120/220 Volts AC and an Input Voltage Range of 85-132 or 170-265 Volts AC. It requires an Input Power of 70 Watts while providing an Output Voltage Range of 18-30 Volts DC.

Related Items we have in stock

1746-NR4

1747-AENTR

2711P-RN6

1756-L55M13

2711P-T6C20D8

1746-OW8

1790-T0B16X

1756-L71S

1762-L40BWAR

1784-SD1

1756-L82E

80190-300-01-R

1769-OA16

1783-BMS10CGA

1756-OW16I

22B-D012N104

1768-L43S

1771-KX1

194E-E63-1753

1746-OB32

1794-PS3

1794-OE8H

1757-PLX52

1769-PB2

1763-L16BBB

1769-OF4CI

1784-PCIC/B

2711-T10G1

1768-ENBT

80190-380-01-R

2711R-T10T

1394-AM50

1769-OW16

1771-OY

1756-L63S

1786-CP

1764-MM1

1762-IF20F2

1769-OB32

22C-D170A103

1756SC-IF8U

800E-3X10

1785-BCM

845H-SJDZ24FWY2C

1771-ICD

1746-IB16

1756-DHRIO

1794-OB8EP

1794-OM16

1794-ACN15/C

1771-A2B

1794-OM16

1747-L533

1784-CF128

1734-TB

1747-L533

2711P-T6M20D

MICROLOGIX1500 1764-LRP

1746-OBP16

2711P-T6M20D



Picture/ Video Request
Buying equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to buy equipment aboard and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.

With video, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

Request to for the video to view the actual piece of equipment you're interested in before purchasing. You can in close to see the labels with the serial number or  the overall condition of the equipment.

It's like having the store come to you!  

Request for Video/Picture

  • Quick Quotes :

    Receive price & availability FAST from our dedicated customer service team.
  • Delivery :

    Expedited, Freight, and International shipping available.

  • Warranty :

    If there's a problem, we'll make it right. Your satisfaction is how we measure success!
  • Returns :

    No hassle return policy.
  • Repair :

    Our team of engineers are creative problem solvers who understand your challenges.
  • Payment :

  • Custom Calibration :

    You give us the specs and we do the rest.
  • Share this page :

What Customers Are Saying
Joseph

was very helpful! WOULD'VE GIVE 10 stars if I could've
Channon Martin

Fast and competent communication

  • 93%
    ON-TIME DELIVERIES
  • 50,000
    SQ FT Warehouse
  • 138
    Countries Served
  • 20+
    Years In Business
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Let's work together
Stuck in a critical breakdown situation? Moore Automation provides a myriad of services to clients across the globe. Contact us today to find out how our experienced team can help you minimise downtime.
Contact Us

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

skype

whatsapp