in stock#
Brand/ Manufacturer:
Dimensions:
9.5 cm x 8.3 cm x 9.5 cmWeight:
0.2 KGCountry of Origin: :
USADescription:
1797-BIC Bus Isolator Module
Mfr. Part Number:
1797-BIC
Manufacturer:
/ Automation
Description:
1797-BIC FLEX Ex I/O Bus Isolator Module, 8 I/O Modules (Max)
Full Description:
1797-BIC FLEX Ex I/O Bus Isolator Module, 8 I/O Modules (Max), allows to configure FLEX Ex modules and FLEX I/O modules on the DIN rail when attached to the same adapter and grouped together
UPC / GTIN:
10612598180254
Status:
Discontinued by manufacturer
Description: The 1797-BIC is a Flex Ex Bus Isolator. This module is utilized for connecting standard Flex I/O modules to Flex Ex modules while maintaining the same I/O group. It supports installation of up to Eight (8) Flex Ex I/O modules. This module supports DIN rail mounting and externally powered by an input voltage supply of 18-32VDC.
Click to get price : : plcinfo@mooreplc.com : +86 18020776786
: live:onlywnn_1 : mooreplc
Moore Automation Limited is not affiliated with or a distributor for . The depiction, description, or sale of products featuring names, trademarks, brands, and logos is for identification and/or reference purposes only and does not indicate any affiliation with or authorization by any rights holder.
The 1797-BIC is a FLEX Ex bus isolator module. The purpose of this FLEX Ex bus isolator module is for connecting standard FLEX I/O modules and provide intrinsically safe connection.
The 1797-BIC FLEX Ex bus isolator module features power indicators, a label, a module locking tab, a removable power connector, a FLEX Ex backplane connector and connector cover, and a master backplane connector. It can be used in intermixed systems that have multiple FLEX I/O modules on the same DIN Rail that use the same adapter. Note that the 1797-BIC FLEX Ex bus isolator module should be attached to the system in the safe part of the operating environment if the system is located in an environment with hazardous locations or machines in it.
For proper operation, the 1797-BIC FLEX Ex bus isolator module needs to be synchronously power cycled to its associated adapter. Install it on the DIN Rail by rotating and pressing it into place, but never install or remove this module while power is applied to it or the power may cause damage to the device or injury to the technicians. The 1797-BIC FLEX Ex bus isolator module meets the CE standards for safe use in certain kinds of hazardous locations. Never try to run signals that are not intrinsically safe through this isolator module. The 1797-BIC FLEX Ex bus isolator module can use the 1794-CE1 and 1794-CE3 cables.
The 1797-BIC supports installation of up to Eight (8) modules. It offers isolation pathways such as Galvanic to DIN EN 60079-11 Flexbus to Flexbus isolation and Galvanic to DIN EN 60079-11 Flexbus to slave side isolation path. This module requires an input supply voltage range of 18-32VDC with supply current of 0.15A. It comes with a built-in Power status indicators.
The 1797-BIC is a DIN rail mounted device. This module is delivered with a removable power connector, along other important parts such as FLEX Ex backplane connector, FLEX Ex backplane connector cover, 7 Master backplane connector and FLEX I/O backplane connector.
This module provides interconnects IS and non-IS field device wiring within the same I/O group. This module permits combination of a Flex Ex system installed within a hazardous area and another standard Flex I/O modules installed in non-hazardous areas. This bus isolator connects to the Flex Ex system via the 1794-CE3 cable wherein a maximum of 1 m or 3.28 ft distance is permitted between the Flex Ex modules and the 1797-BIC Bus Isolator module.
To maintain integrity if the IS system, only connect the Flex Ex backplane connector to modules with intrinsic safety capability. Additionally, as this module is separately powered, always power cycle this module whenever the communication adapter is power cycled to maintain connection.
If you need other brands products like below, please feel free write email to plcinfo@mooreplc.com
You will get Best price and Professional service (24/7)
Brand |
|
Thermal dissipation: |
7.2 BTU/hr |
Series |
Flex I/O 1797 |
IS module type: |
[Ex ib] IIC |
Part Number |
1797-BIC |
Conductor wire size: |
4 mm2 (12 gauge) stranded max; |
Mounting |
DIN Rail |
Output (intrinsically safe) (16 pin male flexbus connector) CENELEC: |
Uo < 5.75V dc I o < 400 mA Po < 2.05 W Lo < 100 ?H Co < 39 ?F |
Manufacturer: |
Automation |
Output (intrinsically safe) (16 pin male flexbus connector) FM and cULus |
Vt < 5.75V dc I t < 398.25 mA Ca < 39.67 ?F La < 210 ?H |
Product Description: |
1797 Flex Ex Bus Isolator module |
Product type |
FLEX Ex bus isolator module |
No. of Flex I/O modules: |
Eight (8) |
Connection type |
Intrinsically safe connections |
Indicators: |
Power - green when power is applied |
Certification |
CE standards |
Flexbus to Flexbus Isolation path: |
Galvanic to DIN EN 60079-11 |
Operating temperature |
-4 to 158 degrees Fahrenheit |
Power consumption: |
18…32V dc @ 0.15 A |
Weight |
About 200 g |
Power dissipation: |
2.1 W |
Cables |
The 1794-CE1 and 1794-CE3 cables |
What is the power supply requirement of the 1797-BIC?
The 1797-BIC requires external supply voltage of 18-32VDC with current of 0.15 A.
How many Flex Ex modules does the 1797-BIC support?
The 1797-BIC supports up to Eight (8) Flex Ex I/O modules.
What is the cable used to connect the bus isolator to the Flex I/O adapter?
Required cable is 1794-CE3. It permits up to 1 m or 3.28 ft distance.
Related Items we have in stock |
|||
1771-OAN |
1606-XLS240E |
1746-NI16V |
1794-L33 |
1756-CPR2 |
1756-IRT8I |
1769-L33ERMK |
1747-L553/C |
2094-BMP5-S |
1734-ACNR |
2711P-T19C22D9P |
1771-P6S |
1769-IM12 |
1756-L72 |
1756-RM |
1756-RM2 |
1746-P1 |
22A-D8P7N104 |
1756-IC16 |
22-HIM-C2S |
2711P-RDK10C |
1756-IA16 |
1747-L551 |
22A-D2P3N104 |
1769-IQ6XOW4 |
1746-IV16 |
1756-IF8I |
1761-NET-DNI |
1747-L531/E |
2711-M3A19L1 |
1770-CD10 |
1747-L524 |
1771-IR |
1771-DB |
1769-OF2 |
D31705-1 A26491-A |
MPL-B330P-SJ74AA |
1786-BNCP |
1756-OA16I |
1771-P7 |
1794-ACNR15 |
1756-DHRIO |
PM3398B-6P-1-3P-E 80026-172-23 |
1747-L552 |
1756-RMC10 |
2711R-T7T |
2711P-B6C20D8 |
1756-OA8E |
1794-ADN |
1783-US08T |
1783-ETAP2F |
1756-ESMCAP |
1440-SDM02-01RA |
1747-BA |
1764-RTC |
1756-RMC1 |
1746-IC16 |
2711P-T12C4D8 |
1785-L40E/E |
1786-RPFRXL |
1769-L16ER-BB1B |
1756-OB16I |
1756-L1M2 |
1794-IE4X0E2 |
1769-CRR1 |
1756-L74 |
1738-IB8M8 |
1771-OBN/B |
22B-A8P0N114 |
1785-L20C |
1762-OB32T |
1771-SDN |
2711-T10G8 |
1769-OF4 |
1769-ADN |
1747-MNET |
It's like having the store come to you!
Quick Quotes :
Receive price & availability FAST from our dedicated customer service team.Delivery :
Expedited, Freight, and International shipping available.
Warranty :
If there's a problem, we'll make it right. Your satisfaction is how we measure success!Returns :
No hassle return policy.Repair :
Our team of engineers are creative problem solvers who understand your challenges.Payment :
Custom Calibration :
You give us the specs and we do the rest.Share this page :
Tweet
Share
Share
Email Us