24701-34-05-00-041-03-02 is a probe housing assembly with a protected 3300 XL 8 mm probe, 0.5 m cable and 4.1 in penetration. It uses no standoff and a 3/4-14 NPT mounting thread.
Item NO.:
24701Order(MOQ):
1Product Origin:
USALead Time：
2 daysBrand/ Manufacturer:
Bently NevadaDimensions:
4.1 in probe penetration; 3/4-14 NPT mountWeight:
Exact configured weight to be confirmedCountry of Origin: :
USADescription:
24701-34-05-00-041-03-02 | Proximity Probe Housing AssemblyVERIFIED PRODUCT CONFIGURATION
24701-34-05-00-041-03-02 is a probe housing assembly with a protected 3300 XL 8 mm probe, 0.5 m cable and 4.1 in penetration. It uses no standoff and a 3/4-14 NPT mounting thread.
CONFIGURATION AT A GLANCE
SYSTEM CONFIGURATION
Confirm the exact part number, mating hardware, cable or probe family, monitoring channel and installed configuration before replacement.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the complete part number, required quantity, destination and installed configuration for quotation and availability checking.
PRODUCT OVERVIEW
24701-34-05-00-041-03-02 is a probe housing assembly with a protected 3300 XL 8 mm probe, 0.5 m cable and 4.1 in penetration. It uses no standoff and a 3/4-14 NPT mounting thread.
PRODUCT LIFECYCLE STATUS
Current Baker Hughes documentation identifies the applicable 24701 probe housing assemblies family. Confirm the complete 24701-34-05-00-041-03-02 ordering code and approval scope before procurement or replacement.
No. It selects the 8 mm probe with protector and an approval option. Housing approval is separate; do not equate this non-CA model with a CA24701 assembly.
Use the option-D dimension in the housing drawing and the actual machine mounting face. Compare the required probe tip position; do not mistake penetration for overall enclosure length.
No. The 00 segment specifies no standoff. If the installation relies on an adapter, resolve the assembly drawing and order configuration before assuming it is included.
The table lists grommets for 1/8–3/16, 1/4–5/16 and 5/16–3/8 in cables. Compare the actual cable outside diameter with the selected grommet and verify the sealing arrangement.
Its selected mount is 3/4-14 NPT, not BSP. Check the machine port drawing and any engineered adapter; forcing different thread systems together is not an acceptable replacement method.
Match the included 3300 XL 8 mm probe and 0.5 m cable to the approved extension and Proximitor arrangement. The housing alone does not define the full electrical system length.
Set the probe position under the machine procedure within the documented adjustment range. Record the final gap and secure the assembly before checking channel output; do not use adjustment to compensate for the wrong mounting geometry.
Verify the protected probe, short cable, NPT plug, reducer and seal grip against the purchase order. Record the complete configuration and fitting contents so an incomplete kit is not issued for an outage.
OFFICIAL MANUFACTURER DOCUMENTS
Use official Bently Nevada sources for the exact 24701 probe housing assemblies configuration. Confirm the complete part number and installed-system requirements before replacement.
Two-page model-specific manual covering exact configuration, product reference data, application guidance and procurement checks.
OPEN PRODUCT MANUAL →OFFICIAL DATASHEETManufacturer family document used to verify the displayed ordering configuration.
OPEN BENTLY NEVADA SUPPORT →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, product identification and connection details, packaging and visible condition. Verify that the supplied unit carries the exact 24701-34-05-00-041-03-02 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786MODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Part number | 24701-34-05-00-041-03-02 |
| Manufacturer | Bently Nevada |
| Product family | 24701 probe housing assemblies |
| Product type | Proximity Probe Housing Assembly |
| Probe option 34 | 3300 XL 8 mm, connector protector and approval option |
| Probe cable 05 | 0.5 m (20 in) |
| Standoff option 00 | No standoff adapter |
| Penetration option 041 | 4.1 in (104.14 mm) |
| Fittings option 03 | 3/4-14 NPT plug, 1/2-14 NPT reducer and cable seal grip |
| Mounting thread 02 | 3/4-14 NPT |
| Country of origin | USA |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, product identification and connection details, packaging and visible condition. Verify that the supplied unit carries the exact 24701-34-05-00-041-03-02 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786WHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, nameplate images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
CUSTOMER VOICES
Bought an ABB panel view from Moore last month but the signal light wouldn't turn on at first... They jumped on a video call with us immediately to guide us through troubleshooting. We talked through it a lot, but we finally got it fixed. Really fast and helpful after-sales support.
It was a very nice and good experience working with Moore. Specially with sales manager Sandy is very polite, skillful and knows everything about the product. Prices are very competitive, have big inventory of products with prompt lead time. Would like to work for a very long time.
Tel : +8618020776786
Whatsapp & Wechat : +8618020776786
Email : [email protected]
1 Year Warranty
