330103-00-12-10-12-05 is a 3300 XL 8 mm unarmored M10 x 1 probe with a 120 mm case and 1 m FluidLoc cable. Option 12 specifies ClickLoc without the factory protector option.
Item NO.:
330103Order(MOQ):
1Product Origin:
USALead Time：
2 daysBrand/ Manufacturer:
Bently NevadaDimensions:
120 mm case; 0 mm unthreaded; M10 x 1Weight:
Exact configured weight to be confirmedCountry of Origin: :
USADescription:
330103-00-12-10-12-05 | Metric FluidLoc Proximity ProbeVERIFIED PRODUCT CONFIGURATION
330103-00-12-10-12-05 is a 3300 XL 8 mm unarmored M10 x 1 probe with a 120 mm case and 1 m FluidLoc cable. Option 12 specifies ClickLoc without the factory protector option.
CONFIGURATION AT A GLANCE
SYSTEM CONFIGURATION
Confirm the exact part number, mating hardware, cable or probe family, monitoring channel and installed configuration before replacement.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the complete part number, required quantity, destination and installed configuration for quotation and availability checking.
PRODUCT OVERVIEW
330103-00-12-10-12-05 is a 3300 XL 8 mm unarmored M10 x 1 probe with a 120 mm case and 1 m FluidLoc cable. Option 12 specifies ClickLoc without the factory protector option.
PRODUCT LIFECYCLE STATUS
Current Baker Hughes documentation identifies the applicable 3300 XL 8 mm Proximity Transducer System family. Confirm the complete 330103-00-12-10-12-05 ordering code and approval scope before procurement or replacement.
Option 12 does not include the factory connector-protector selection. Assess the connection environment and plan manufacturer-compatible protection; the datasheet recommends connector protectors for increased environmental protection.
FluidLoc addresses fluid passage through the cable interior, not abrasion of its exterior. Inspect the route, provide appropriate support and keep the unarmored cable away from damaging contact under the installation procedure.
The 00 segment gives 0 mm unthreaded length. Compare the M10 x 1 mounting and required insertion depth with the drawing; do not interpret 12 as a 12 mm case or assume a smooth extension beyond the thread.
Review mechanical fit separately from transducer-system compatibility. This is an M10 x 1 case, so a different threaded mounting is not interchangeable just because the probe family or connector appears similar.
Check the intended shaft-position or vibration measurement, conductive target material and clearance. Confirm that the channel uses the applicable 3300 XL proximity system and review the machine-specific installation before approving the spare.
Provide the installed Proximitor part number and intended total system length, together with any extension cable identification. Keep the 1 m probe lead distinct from total system length when preparing the bill of materials.
Check the 120 mm case, zero unthreaded selection, 1 m FluidLoc lead and ClickLoc condition. Record the absence of the factory protector option and confirm the planned external protection and approval evidence before issuing the spare.
Verify the gap and mounting, assess the fluid boundary and connection protection, then validate the monitoring channel output with the installed system. Retain the commissioning readings and the applicable 05 approval documents in the maintenance record.
OFFICIAL MANUFACTURER DOCUMENTS
Use official Bently Nevada sources for the exact 3300 XL 8 mm Proximity Transducer System configuration. Confirm the complete part number and installed-system requirements before replacement.
Two-page model-specific manual covering exact configuration, product reference data, application guidance and procurement checks.
OPEN PRODUCT MANUAL →OFFICIAL SUPPORT PAGEOfficial product support entry for the specified Bently Nevada part number.
OPEN BENTLY NEVADA SUPPORT →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, probe, connector and armor details, packaging and visible condition. Verify that the supplied unit carries the exact 330103-00-12-10-12-05 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786MODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Part number | 330103-00-12-10-12-05 |
| Manufacturer | Bently Nevada |
| Product family | 3300 XL 8 mm Proximity Transducer System |
| Product type | Metric FluidLoc Proximity Probe |
| Unthreaded length | 0 mm |
| Overall case length | 120 mm |
| Total length | 1.0 m (3.3 ft) |
| Connector | Miniature coaxial ClickLoc; no protector option |
| Cable | FluidLoc cable without armor |
| Approvals | CSA, ATEX and IECEx; verify supplied markings |
| Country of origin | USA |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, probe, connector and armor details, packaging and visible condition. Verify that the supplied unit carries the exact 330103-00-12-10-12-05 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786WHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, nameplate images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
CUSTOMER VOICES
Bought an ABB panel view from Moore last month but the signal light wouldn't turn on at first... They jumped on a video call with us immediately to guide us through troubleshooting. We talked through it a lot, but we finally got it fixed. Really fast and helpful after-sales support.
It was a very nice and good experience working with Moore. Specially with sales manager Sandy is very polite, skillful and knows everything about the product. Prices are very competitive, have big inventory of products with prompt lead time. Would like to work for a very long time.
Tel : +8618020776786
Whatsapp & Wechat : +8618020776786
Email : [email protected]
1 Year Warranty
