The Bently Nevada 330104-13-20-50-02-00 is a 3300 XL 8 mm M10 x 1 armored proximity probe. Its ordering code specifies 130 mm unthreaded length, 200 mm case length, 5.0 m total length, an unprotected ClickLoc connector and no approval option.
Item NO.:
330104-13-20-50-02-0Order(MOQ):
1Product Origin:
USALead Time：
2 daysBrand/ Manufacturer:
Bently NevadaDimensions:
330104-13-20-50-02-00Weight:
3300 XL 8 mm Proximity Transducer SystemCountry of Origin: :
USADescription:
330104-13-20-50-02-00 | M10 x 1 armored proximity probeVERIFIED PRODUCT CONFIGURATION
330104-13-20-50-02-00 is a M10 x 1 armored proximity probe from the Bently Nevada 3300 XL 8 mm Proximity Transducer System family. The exact part number, probe case, total system length, connector, armor and approval configuration must be confirmed before ordering.
CONFIGURATION AT A GLANCE
System Configuration
Confirm the compatible probe, extension cable and sensor installation length against Bently Nevada documentation before replacement or expansion.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the complete part number, required quantity, destination and installed configuration for quotation and availability checking.
PRODUCT OVERVIEW
330104-13-20-50-02-00 is a Bently Nevada M10 x 1 armored proximity probe. Its documented configuration includes a M10 x 1 thread threaded case, Stainless-steel armor, 130 mm unthreaded length, 200 mm overall case length, 5.0 m (16.4 ft) total length, ClickLoc connector without connector protector; standard cable and Multiple approvals.
Lifecycle assessment from current manufacturer evidence: Bently Nevada marks part number 330104-13-20-50-02-00 as official manufacturer datasheet configuration, in the Baker Hughes Bently Nevada official datasheet.
Important: Confirm the complete part number, probe dimensions, probe length, connector, armor and approval option against the current Bently Nevada datasheet before ordering.
Compare the M10 x 1 thread, 130 mm unthreaded length and 200 mm overall case length with the installed probe, bracket and target clearances.
Use it only in a correctly matched 3300 XL 8 mm Proximity Transducer System measurement chain; confirm the proximitor, extension cable, target material, linear range and machine protection requirements.
Check the 130 mm unthreaded section, 200 mm case length, mounting thread engagement, probe gap and cable bend radius against the mechanical drawing.
This configuration uses ClickLoc connector without connector protector; standard cable with 5.0 m (16.4 ft) total length. Verify mating parts, routing, continuity, shield practice and system-length matching before calibration.
The cable construction is Stainless-steel armored cable and the approval selection is No approvals. Confirm both on the supplied nameplate and against site certification requirements.
Photograph the complete ordering code, connector, cable and probe body; verify dimensions, armor, approval markings, packaging and visible condition before stocking.
Record the old probe gap and channel baseline, confirm compatible cable and proximitor, stage the removed unit for rollback, then validate gap voltage and protection-channel response under the site procedure.
Store the 5.0 m (16.4 ft) assembly with protected connectors and controlled bend radius, retain lot/nameplate traceability, and complete visual and continuity checks before issue.
OFFICIAL MANUFACTURER DOCUMENTS
Use official Bently Nevada sources for the exact M10 x 1 armored proximity probe part. Confirm hardware version, configuration, installed Overall case length and project configuration before replacement.
Two-page model-specific manual covering exact configuration, product reference data, application guidance and procurement checks.
OPEN PRODUCT MANUAL →OFFICIAL SUPPORT PAGEOfficial product support entry for the specified Bently Nevada part number.
OPEN BENTLY NEVADA SUPPORT →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, probe, connector and armor details, packaging and visible condition. Verify that the supplied unit carries the exact 330104-13-20-50-02-00 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786MODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Displayed model | 330104-13-20-50-02-00 |
| Manufacturer | Bently Nevada |
| Product family | 3300 XL 8 mm Proximity Transducer System Proximity Transducer System |
| Product type | Armored M10 x 1 armored proximity probe |
| Unthreaded length | 130 mm |
| Overall case length | 200 mm |
| Total length | 5.0 m (16.4 ft) |
| Connector / cable option | ClickLoc connector without connector protector; standard cable |
| Armor | Stainless-steel armored cable |
| Agency approvals | No approvals |
| Country of origin | USA |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, probe, connector and armor details, packaging and visible condition. Verify that the supplied unit carries the exact 330104-13-20-50-02-00 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786WHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, nameplate images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
DIRECT SALES CONTACT
CUSTOMBS VOICES
Bought an ABB panel view from Moore last month. When the signal light would not turn on, the team joined a video call immediately and guided us through troubleshooting until it was fixed. Fast and helpful after-sales support.
It was a very good experience working with Moore. Sales manager Sandy is polite, skillful and knows the products. Pricing is competitive, inventory is strong and lead times are prompt.
Tel : +86 18030235313
Whatsapp & Wechat : +86 18030235313
Email : [email protected]
1 Year Warranty
