1 Year Warranty
ER
Elena Rossi
★★★★★
Fast replies helped us confirm the Siemens 6GK5204-2AA00-2BD2 configuration, and the quotation details were clear.
QUOTE & IDENTIFICATION5.0 / 5.0
The Bently Nevada 330104-15-23-50-02-00 is a 3300 XL 8 mm Proximity Transducer System 3/8-24 UNF proximity probe. It has a 0.0 in unthreaded length, 3.5 in overall case length, 1.0 m (3.3 ft) total length and a miniature coaxial ClickLoc connector.
Item NO.:
330104-15-23-50-02-0Order(MOQ):
1Product Origin:
USALead Time：
2 daysBrand/ Manufacturer:
Bently NevadaDimensions:
330102-00-35-10-01-05Weight:
See official datasheetCountry of Origin: :
USADescription:
330102-00-35-10-01-05 | 3300 XL 8 mm 3/8-24 UNF Armored Proximity ProbeVERIFIED PRODUCT CONFIGURATION
330104-15-23-50-02-00 is a M10 x 1 Armored Proximity Probe in the Bently Nevada 3300 XL 8 mm Proximity Transducer System. Confirm the complete ordering code and installed configuration against the official datasheet before ordering.
CONFIGURATION AT A GLANCE
SYSTEM CONFIGURATION
Match the exact model, mating components, wiring or cable route, mounting, approvals and project configuration before replacement.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the complete part number, quantity, destination and installed configuration.
PRODUCT OVERVIEW
330104-15-23-50-02-00 is a M10 x 1 Armored Proximity Probe for the 3300 XL 8 mm Proximity Transducer System. The exact option values below must be compared with the supplied nameplate and installed system.
Confirm the 3300 XL 8 mm system family, M10 x 1 mounting thread, mating extension cable and Proximitor sensor part numbers. Treat the probe, extension cable and Proximitor as a calibrated system rather than mixing visually similar components.
Measure the bracket depth, target clearance and available withdrawal space, then compare them with the 150 mm unthreaded length and 230 mm overall case length. Confirm that the installed bracket can hold the probe without loading the armored lead.
Inspect the M10 x 1 threaded hole and locknut, set the probe gap using the applicable system procedure, secure the final position and verify that the stainless-steel armor is not twisted, crushed or used as a pulling point.
Route the full 5.0 m lead without tight bends, hot-surface contact or unsupported strain. Confirm that the connector reaches the intended junction point without coiling excess cable beside high-current conductors.
Do not substitute solely because the electrical family matches. Compare mechanical protection, cable route exposure, case dimensions, connector option, approvals and the complete ordering code before approving a replacement.
Photograph the full nameplate and probe, verify the M10 x 1 case, 150 mm unthreaded section, 230 mm overall case, 5.0 m lead, ClickLoc connector and stainless-steel armor, and quarantine any unit with damaged armor or threads.
Record the previous probe gap or voltage, installed cable path, mating component numbers and channel condition before removal. After installation, document the new gap setting and complete the applicable loop and protection-channel functional tests.
Store it flat or in a large-radius coil with connector caps fitted, protect the M10 x 1 threads and probe tip, preserve batch and nameplate traceability, and inspect armor continuity and visible condition before site release.
OFFICIAL MANUFACTURER DOCUMENTS
Use the exact-model Moore Automation manual together with the official Bently Nevada family datasheet before procurement, installation or replacement.
Two-page model-specific manual covering decoded configuration, application guidance and procurement checks.
OPEN PRODUCT MANUAL →OFFICIAL BENTLY NEVADA DOCUMENTOfficial family datasheet used for model identification and option verification.
OPEN OFFICIAL DOCUMENT →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Verify that the supplied unit carries the exact 330104-15-23-50-02-00 part number and matches the required hardware configuration.
MODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Part number | 330104-15-23-50-02-00 |
| Manufacturer | Bently Nevada |
| Product family | 3300 XL 8 mm Proximity Transducer System |
| Product type | M10 x 1 Armored Proximity Probe |
| Unthreaded length | 150 mm |
| Overall case length | 230 mm |
| Total length | 5.0 m (16.4 ft) |
| Connector / cable | ClickLoc connector; standard cable |
| Armor | Stainless-steel armored cable |
| Approval option | Not required |
| Country of origin | USA |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, probe, connector and armor details, packaging and visible condition. Verify that the supplied unit carries the exact 330104-15-23-50-02-00 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786WHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, nameplate images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
CUSTOMER VOICES
Fast replies helped us confirm the Siemens 6GK5204-2AA00-2BD2 configuration, and the quotation details were clear.
The dispatch updates were timely and the Siemens industrial switch arrived as arranged. Professional support throughout.
Tel : +86 18030235313
Whatsapp & Wechat : +86 18030235313
Email : [email protected]
