1 Year Warranty
ER
Elena Rossi
★★★★★
Fast replies helped us confirm the Siemens 6GK5204-2AA00-2BD2 configuration, and the quotation details were clear.
QUOTE & IDENTIFICATION5.0 / 5.0
The Bently Nevada 330130-075-02-00 is a 3300 XL 8 mm Proximity Transducer System 3/8-24 UNF proximity probe. It has a 0.0 in unthreaded length, 3.5 in overall case length, 1.0 m (3.3 ft) total length and a miniature coaxial ClickLoc connector.
Item NO.:
330130-075-02-00Order(MOQ):
1Product Origin:
USALead Time：
2 daysBrand/ Manufacturer:
Bently NevadaDimensions:
330102-00-35-10-01-05Weight:
See official datasheetCountry of Origin: :
USADescription:
330102-00-35-10-01-05 | 3300 XL 8 mm 3/8-24 UNF Armored Proximity ProbeVERIFIED PRODUCT CONFIGURATION
330130-075-02-00 is a Standard Extension Cable with Connector Protectors in the Bently Nevada 3300 XL 8 mm Proximity Transducer System. Confirm the complete ordering code and installed configuration against the official datasheet before ordering.
CONFIGURATION AT A GLANCE
SYSTEM CONFIGURATION
Match the exact model, mating components, wiring or cable route, mounting, approvals and project configuration before replacement.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the complete part number, quantity, destination and installed configuration.
PRODUCT OVERVIEW
330130-075-02-00 is a Standard Extension Cable with Connector Protectors for the 3300 XL 8 mm Proximity Transducer System. The exact option values below must be compared with the supplied nameplate and installed system.
Add the probe lead length and the 7.5 m extension cable length, then compare the result with the system length required by the installed Proximitor sensor. Do not select this cable from connector appearance alone.
The protectors help shield the connector junctions from mechanical exposure. Confirm both protectors are present, correctly positioned and compatible with the installed probe and Proximitor connections before routing the cable.
Use it to place the Proximitor sensor away from the probe while maintaining the documented 3300 XL 8 mm transducer-system length. Verify the machine layout, junction locations and cable route before ordering.
Keep the cable away from sharp edges, excessive heat, crushing points and high-current wiring. Maintain suitable bend radius, support the connectors and leave enough service loop for inspection without creating a tightly wound coil.
Do not alter the calibrated extension cable. If the installed system length is wrong, select the correct factory length and matching transducer components instead of cutting, splicing or adding a nonapproved cable.
Confirm the complete 330130-075-02-00 marking, 7.5 m length, standard cable construction, both connector protectors and undamaged connector pins, jackets and seals before the cable enters controlled stock.
Provide the probe model and lead length, Proximitor sensor model, required total system length, connector-protector requirement, quantity and shutdown date so the 7.5 m cable can be checked against the installed loop.
Keep it loosely coiled in dry protective packaging with connector caps installed and identification visible. Before installation, inspect the jacket and connectors and perform only the continuity or insulation checks permitted by the site procedure.
OFFICIAL MANUFACTURER DOCUMENTS
Use the exact-model Moore Automation manual together with the official Bently Nevada family datasheet before procurement, installation or replacement.
Two-page model-specific manual covering decoded configuration, application guidance and procurement checks.
OPEN PRODUCT MANUAL →OFFICIAL BENTLY NEVADA DOCUMENTOfficial family datasheet used for model identification and option verification.
OPEN OFFICIAL DOCUMENT →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Verify that the supplied unit carries the exact 330130-075-02-00 part number and matches the required hardware configuration.
MODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Part number | 330130-075-02-00 |
| Manufacturer | Bently Nevada |
| Product family | 3300 XL 8 mm Proximity Transducer System |
| Product type | Standard Extension Cable with Connector Protectors |
| Cable length | 7.5 m (24.6 ft) |
| Cable option | Standard cable with connector protectors |
| Approval option | Not required |
| System matching | Probe plus extension cable must equal Proximitor system length |
| Country of origin | USA |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, probe, connector and armor details, packaging and visible condition. Verify that the supplied unit carries the exact 330130-075-02-00 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786WHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, nameplate images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
CUSTOMER VOICES
Fast replies helped us confirm the Siemens 6GK5204-2AA00-2BD2 configuration, and the quotation details were clear.
The dispatch updates were timely and the Siemens industrial switch arrived as arranged. Professional support throughout.
Tel : +86 18030235313
Whatsapp & Wechat : +86 18030235313
Email : [email protected]
