1 Year Warranty
ER
Elena Rossi
★★★★★
Fast replies helped us confirm the Siemens 6GK5204-2AA00-2BD2 configuration, and the quotation details were clear.
QUOTE & IDENTIFICATION5.0 / 5.0
The Bently Nevada 330130-085-01-CN is a 3300 XL 8 mm Proximity Transducer System 3/8-24 UNF proximity probe. It has a 0.0 in unthreaded length, 3.5 in overall case length, 1.0 m (3.3 ft) total length and a miniature coaxial ClickLoc connector.
Item NO.:
330130-085-01-CNOrder(MOQ):
1Product Origin:
USALead Time：
2 daysBrand/ Manufacturer:
Bently NevadaDimensions:
330102-00-35-10-01-05Weight:
See official datasheetCountry of Origin: :
USADescription:
330102-00-35-10-01-05 | 3300 XL 8 mm 3/8-24 UNF Armored Proximity ProbeVERIFIED PRODUCT CONFIGURATION
330130-085-01-CN is a Armored Extension Cable in the Bently Nevada 3300 XL 8 mm Proximity Transducer System. Confirm the complete ordering code and installed configuration against the official datasheet before ordering.
CONFIGURATION AT A GLANCE
SYSTEM CONFIGURATION
Match the exact model, mating components, wiring or cable route, mounting, approvals and project configuration before replacement.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the complete part number, quantity, destination and installed configuration.
PRODUCT OVERVIEW
330130-085-01-CN is a Armored Extension Cable for the 3300 XL 8 mm Proximity Transducer System. The exact option values below must be compared with the supplied nameplate and installed system.
Verify the probe lead length, required calibrated system length and Proximitor sensor model. The 8.5 m armored cable must produce the documented total system length with the exact installed probe.
Use the armored option where the approved project design requires additional mechanical cable protection. Confirm routing, supports, connector access and environmental exposure rather than substituting it automatically for a standard cable.
Avoid tight bends, kinks, torsion and unsupported weight at either connector. Clamp or support the route according to the site design without crushing the armor or transferring mechanical load to the electrical connection.
Check the supplied nameplate, certification markings and project documentation for the exact CN suffix. Do not infer approval coverage from another 330130 cable or from the armor option alone.
First compare the complete ordering code, connector arrangement, installation space, required mechanical protection, system length and certification. Electrical length alone does not establish drop-in replacement suitability.
Confirm the exact model and CN marking, measure or verify the 8.5 m length, inspect the armor for flattening or broken sections, and check that connector bodies, threads, caps and packaging are intact.
Record the probe and Proximitor models, calculated system length, cable route, support points, connector condition and CN documentation. Retain the removed cable until loop response and protection-channel checks have passed.
Store it in a large-radius coil with the armor unstressed and both connectors capped. Preserve serial or batch traceability and recheck the CN marking and connector condition before issuing it to a shutdown job.
OFFICIAL MANUFACTURER DOCUMENTS
Use the exact-model Moore Automation manual together with the official Bently Nevada family datasheet before procurement, installation or replacement.
Two-page model-specific manual covering decoded configuration, application guidance and procurement checks.
OPEN PRODUCT MANUAL →OFFICIAL BENTLY NEVADA DOCUMENTOfficial family datasheet used for model identification and option verification.
OPEN OFFICIAL DOCUMENT →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Verify that the supplied unit carries the exact 330130-085-01-CN part number and matches the required hardware configuration.
MODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Part number | 330130-085-01-CN |
| Manufacturer | Bently Nevada |
| Product family | 3300 XL 8 mm Proximity Transducer System |
| Product type | Armored Extension Cable |
| Cable length | 8.5 m (27.9 ft) |
| Cable option | Armored cable |
| Suffix | CN - confirm supplied marking and certification |
| System matching | Probe plus extension cable must equal Proximitor system length |
| Country of origin | USA |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, probe, connector and armor details, packaging and visible condition. Verify that the supplied unit carries the exact 330130-085-01-CN part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786WHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, nameplate images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
CUSTOMER VOICES
Fast replies helped us confirm the Siemens 6GK5204-2AA00-2BD2 configuration, and the quotation details were clear.
The dispatch updates were timely and the Siemens industrial switch arrived as arranged. Professional support throughout.
Tel : +86 18030235313
Whatsapp & Wechat : +86 18030235313
Email : [email protected]
