1 Year Warranty
ER
Elena Rossi
★★★★★
Fast replies helped us confirm the Bently Nevada 330171-00-33-50-01-05 configuration, and the quotation details were clear.
QUOTE & IDENTIFICATION5.0 / 5.0
The Bently Nevada 330171-00-33-50-01-05 is a 3300 5 mm proximity probe without armor, with 1/4-28 UNF thread, 3.3 in case and 5.0 m total length. Confirm matched system components before ordering.
Item NO.:
330171Order(MOQ):
1Product Origin:
USALead Time：
2 daysBrand/ Manufacturer:
Bently NevadaDimensions:
330171-00-33-50-01-05Weight:
3300 5 mm Proximity ProbeCountry of Origin: :
USADescription:
330171-00-33-50-01-05 | 1/4-28 UNF probe without armorVERIFIED PRODUCT CONFIGURATION
330171-00-33-50-01-05 is a 3300 5 mm proximity probe without armor, with 1/4-28 UNF thread, 3.3 in case and 5.0 m total length. Confirm matched system components before ordering.
CONFIGURATION AT A GLANCE
SYSTEM CONFIGURATION
Confirm the exact part number, mating hardware, cable or probe family, monitoring channel and installed configuration before replacement.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the complete part number, required quantity, destination and installed configuration for quotation and availability checking.
PRODUCT OVERVIEW
The Bently Nevada 330171-00-33-50-01-05 is a 3300 5 mm proximity probe without armor, with 1/4-28 UNF thread, 3.3 in case and 5.0 m total length. Confirm matched system components before ordering.
PRODUCT LIFECYCLE STATUS
Current Baker Hughes documentation identifies the applicable 3300 5 mm Proximity Transducer System family. Confirm the complete 330171-00-33-50-01-05 ordering code and approval scope before procurement or replacement.
330171-00-33-50-01-05 is listed as 5 mm Proximity Probe in the 3300 5 mm Proximity Transducer System. Verify the matching Proximitor Sensor, extension cable, thread, target material and calibrated system length before substitution.
Check Unthreaded length: 0.0 in; Overall case length: 3.3 in. Confirm insertion depth, bracket clearance and tip position against the machine drawing.
Total length: 5.0 m (16.4 ft); Connector: ClickLoc with connector protector; Cable: Standard cable without armor. Do not extend or shorten a calibrated proximity system without engineering review.
Connector: ClickLoc with connector protector; Cable: Standard cable without armor. Inspect the ordered construction against routing, abrasion and fluid-exposure requirements.
Approvals: Multiple approvals. For regulated locations, match the nameplate and certificate scope to the site classification before installation.
Verify the exact part number, probe tip, thread, case length, cable length, connector condition and any protector or armor. Record nameplate and package photos for the MRO file.
Confirm probe gap, mounting torque, cable routing, connector engagement and system output with the installed monitor. Compare baseline voltage and vibration response with site acceptance limits.
Provide the exact model 330171-00-33-50-01-05, required quantity, matched system components, machinery application, hazardous-area requirements and delivery destination. This prevents an electrically similar but mechanically different probe from being supplied.
OFFICIAL MANUFACTURER DOCUMENTS
Use official Bently Nevada sources for the exact 3300 5 mm Proximity Transducer System configuration. Confirm the complete part number and installed-system requirements before replacement.
Two-page model-specific manual covering exact configuration, product reference data, application guidance and procurement checks.
OPEN PRODUCT MANUAL →OFFICIAL SUPPORT PAGEOfficial product support entry for the specified Bently Nevada part number.
OPEN BENTLY NEVADA SUPPORT →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, probe, connector and armor details, packaging and visible condition. Verify that the supplied unit carries the exact 330171-00-33-50-01-05 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786MODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Part number | 330171-00-33-50-01-05 |
| Manufacturer | Bently Nevada |
| Product family | 3300 5 mm Proximity Transducer System |
| Product type | 5 mm Proximity Probe |
| Unthreaded length | 0.0 in |
| Overall case length | 3.3 in |
| Total length | 5.0 m (16.4 ft) |
| Connector | ClickLoc with connector protector |
| Cable | Standard cable without armor |
| Approvals | Multiple approvals |
| Country of origin | USA |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, probe, connector and armor details, packaging and visible condition. Verify that the supplied unit carries the exact 330171-00-33-50-01-05 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786WHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, nameplate images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
CUSTOMER VOICES
Fast replies helped us confirm the Bently Nevada 330171-00-33-50-01-05 configuration, and the quotation details were clear.
The dispatch updates were timely and the 5 mm Proximity Probe arrived as arranged. Professional support throughout.
Tel : +86 18030235313
Whatsapp & Wechat : +86 18030235313
Email : [email protected]
