Model 330180-50-05 identifies the Bently Nevada 3300 XL 8 mm Proximitor sensor. A 3300 XL 8 mm Proximitor sensor configured for a 5.0 m system length, panel mounting and the CSA, ATEX and IECEx approval option.
Item NO.:
330180-50-05Brand/ Manufacturer:
Bently NevadaDimensions:
Confirm against the cited exact-model recordWeight:
Confirm against the cited exact-model recordCountry of Origin: :
One-year support under Moore Automation sales termsDescription:
3300 XL 8 mm Proximitor sensorThe probe plus extension cable length must match the 5.0 m Proximitor system length. Confirm the target material, probe family, extension cable, monitor input, mounting style and hazardous-area documentation as one calibrated transducer system.
Engineering note: Match probe and extension-cable lengths so their total equals the 5.0 m sensor system length. Use the panel-mount footprint and maintain the electrical isolation provided by the mounting base. Confirm the hazardous-area approval and entity requirements for the installed location. Gap and verify the complete probe, extension cable and Proximitor sensor system before service.
Installation planning
Confirm 330180-50-05 enclosure protection, cabinet heat dissipation, mounting arrangement and documented environmental limits before installation.
Storage and handling
Keep 330180-50-05 protected from moisture, contamination, impact and electrostatic discharge from receipt through installation.
Send the exact 330180-50-05 model, required quantity, destination and installed hardware details. Request current nameplate photographs and confirm compatibility before ordering.
A 3300 XL 8 mm Proximitor sensor configured for a 5.0 m system length, panel mounting and the CSA, ATEX and IECEx approval option.
The probe plus extension cable length must match the 5.0 m Proximitor system length. Confirm the target material, probe family, extension cable, monitor input, mounting style and hazardous-area documentation as one calibrated transducer system.
Lifecycle assessment: Confirm current availability and lifecycle status against the latest manufacturer notice for the exact article number.
Ordering check: Verify the full model, article number, hardware revision and supported project release before purchasing.
Complete these six checks against the current project documentation and the official exact-model record.
The probe plus extension cable length must match the 5.0 m Proximitor system length. Confirm the target material, probe family, extension cable, monitor input, mounting style and hazardous-area documentation as one calibrated transducer system.
Match probe and extension-cable lengths so their total equals the 5.0 m sensor system length Use the panel-mount footprint and maintain the electrical isolation provided by the mounting base Confirm the hazardous-area approval and entity requirements for the installed location Gap and verify the complete probe, extension cable and Proximitor sensor system before service
Check the full model value 330180-50-05, the manufacturer name and the ordered suffix against the nameplate and quotation.
The cited Bently Nevada model page and technical publication define the identity and function used on this page.
The probe plus extension cable length must match the 5.0 m Proximitor system length. Confirm the target material, probe family, extension cable, monitor input, mounting style and hazardous-area documentation as one calibrated transducer system.
Match probe and extension-cable lengths so their total equals the 5.0 m sensor system length.
Use the panel-mount footprint and maintain the electrical isolation provided by the mounting base. Apply any numeric limit only from the cited official revision.
No. Appearance alone is not evidence of interchangeability; compare the exact model, suffix, interfaces, accessories and documented system release.
Keep it in protective packaging, control electrostatic discharge where applicable, protect connectors and inspect identification before use.
Gap and verify the complete probe, extension cable and Proximitor sensor system before service. Record the result before return to service.
Provide the exact model, installed companion hardware, wiring or cable details, revision data, application conditions and clear photographs.
Provide the exact model, quantity, destination, required date, installed-system details and clear nameplate photographs so the item can be checked before quotation.
Both PDFs are hosted on dcsmodule.com and prepared from the exact official Bently Nevada manufacturer records cited on this page. They are independent Moore Automation references, not manufacturer-issued manuals.
Exact article identity, application context, procurement checks, replacement guidance and manufacturer-source trace.
OPEN SITE PDF → TECHNICAL DATAModel-specific specifications, compatibility boundaries, installation checks, commissioning guidance and official-source trace.
OPEN TECHNICAL DATA PDF →Ask for the exact 330180-50-05 nameplate, hardware identification, revision, connector condition and packaging. Verify that the supplied unit carries the exact 330180-50-05 identification.
| Specification | Official identification / verification note |
|---|---|
| Model | 330180-50-05 |
| Product type | 3300 XL 8 mm Proximitor sensor |
| System length option | 5.0 m (16.4 ft) |
| Mounting option | Panel mount |
| Agency approval option | CSA, ATEX and IECEx approvals |
| Associated probe family | 3300 XL 5 mm and 8 mm proximity transducer components as defined by the official datasheet |
| Typical system application | Radial vibration, axial position, Keyphasor reference and speed measurement |
| Installation feature | SpringLoc terminal strips |
| Mounting isolation | Mounting base provides electrical isolation |
| Calibration basis | Factory calibration to AISI 4140 steel unless another target material is specified |
Technical-data note: Values shown here are limited to the exact model and explicitly documented assembly. Confirm field conditions and the applicable project release before installation.
More from this brand · Browse by category
Same-brand products are listed first, by other verified industrial-control references.
Verified industrial-control product references for related engineering and procurement work.
Verified industrial-control product references for related engineering and procurement work.
Verified industrial-control product references for related engineering and procurement work.
Send the full 330180-50-05 model, required quantity and delivery country. Our team can check current availability and arrange nameplate photos, packaging images or live or recorded video verification where available.
Confirm the exact 330180-50-05 model, available quantity, condition and estimated dispatch time.
Check the exact model, article number, hardware identification, revision and visible product condition.
Receive quotation, warranty terms, delivery options and international shipping support.
Send the full model, quantity and destination for quotation and availability checking.
Commercial details were communicated clearly, which helped our internal approval move smoothly.
Tiffany identified the companion-hardware details that needed confirmation before ordering.
Tel : +8618020776786
Whatsapp & Wechat : +8618020776786
Email : [email protected]
1 Year Warranty
