1 Year Warranty
ER
Elena Rossi
★★★★★
Fast replies helped us confirm the Siemens 6GK5204-2AA00-2BD2 configuration, and the quotation details were clear.
QUOTE & IDENTIFICATION5.0 / 5.0
The Bently Nevada 330851-02-000-050-10-00-05 is a 3300 XL 25 mm Proximity Transducer System 3/8-24 UNF proximity probe. It has a 0.0 in unthreaded length, 3.5 in overall case length, 1.0 m (3.3 ft) total length and a miniature coaxial ClickLoc connector.
Item NO.:
330851-02-000-050-10Order(MOQ):
1Product Origin:
USALead Time：
2 daysBrand/ Manufacturer:
Bently NevadaDimensions:
330102-00-35-10-01-05Weight:
See official datasheetCountry of Origin: :
USADescription:
330102-00-35-10-01-05 | 3300 XL 8 mm 3/8-24 UNF Armored Proximity ProbeVERIFIED PRODUCT CONFIGURATION
330851-02-000-050-10-00-05 is a M30 x 2 Threaded Proximity Probe in the Bently Nevada 3300 XL 25 mm Proximity Transducer System. Confirm the complete ordering code and installed configuration against the official datasheet before ordering.
CONFIGURATION AT A GLANCE
SYSTEM CONFIGURATION
Match the exact model, mating components, wiring or cable route, mounting, approvals and project configuration before replacement.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the complete part number, quantity, destination and installed configuration.
PRODUCT OVERVIEW
330851-02-000-050-10-00-05 is a M30 x 2 Threaded Proximity Probe for the 3300 XL 25 mm Proximity Transducer System. The exact option values below must be compared with the supplied nameplate and installed system.
Match it only with the documented 3300 XL 25 mm Proximitor and extension-cable arrangement. Confirm the complete ordering code, M30 x 2 probe case and required system length before combining components.
Use the 25 mm system only where the machine-monitoring design and target geometry call for that family. Confirm target material, measurement range, mounting arrangement and monitor input against the approved project documentation.
Verify thread size and engagement, bracket strength, available 50 mm case clearance and locknut access. Set the probe position and gap using the applicable 25 mm system procedure without loading the integral cable.
Include the 1.0 m probe lead when calculating the calibrated system length. Select the mating extension cable and Proximitor so the complete loop length matches the official system configuration.
Compare the exact nameplate approval markings with the hazardous-area classification and project certification schedule. Approval code 05 does not remove the need to verify the supplied unit and installation method.
Verify model, M30 x 2 threads, zero unthreaded-length option, 50 mm overall case, 1.0 m lead, no-armor construction and approval marking. Inspect the large probe tip, thread and cable entry for damage.
Record the existing mechanical position, gap or reference reading, target condition, mating extension cable and Proximitor model. Keep the removed probe available until channel response and alarm or trip testing is complete.
Fit thread and tip protection, avoid bending the unarmored lead at the cable entry, retain approval and traceability documents, and complete visual and connector checks before releasing the spare to the field.
OFFICIAL MANUFACTURER DOCUMENTS
Use the exact-model Moore Automation manual together with the official Bently Nevada family datasheet before procurement, installation or replacement.
Two-page model-specific manual covering decoded configuration, application guidance and procurement checks.
OPEN PRODUCT MANUAL →OFFICIAL BENTLY NEVADA DOCUMENTOfficial family datasheet used for model identification and option verification.
OPEN OFFICIAL DOCUMENT →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Verify that the supplied unit carries the exact 330851-02-000-050-10-00-05 part number and matches the required hardware configuration.
MODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Part number | 330851-02-000-050-10-00-05 |
| Manufacturer | Bently Nevada |
| Product family | 3300 XL 25 mm Proximity Transducer System |
| Product type | M30 x 2 Threaded Proximity Probe |
| Probe case | M30 x 2 thread |
| Unthreaded length | 0 mm |
| Overall case length | 50 mm |
| Total length | 1.0 m (3.3 ft) |
| Armor | No armor |
| Approvals | Multiple approvals |
| Country of origin | USA |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, probe, connector and armor details, packaging and visible condition. Verify that the supplied unit carries the exact 330851-02-000-050-10-00-05 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786WHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, nameplate images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
CUSTOMER VOICES
Fast replies helped us confirm the Siemens 6GK5204-2AA00-2BD2 configuration, and the quotation details were clear.
The dispatch updates were timely and the Siemens industrial switch arrived as arranged. Professional support throughout.
Tel : +86 18030235313
Whatsapp & Wechat : +86 18030235313
Email : [email protected]
