1 Year Warranty
ER
Elena Rossi
★★★★★
Fast replies helped us confirm the Siemens 6GK5204-2AA00-2BD2 configuration, and the quotation details were clear.
QUOTE & IDENTIFICATION5.0 / 5.0
The Bently Nevada 330851-02-000-050-90-00-CN is a 3300 XL 25 mm Proximity Transducer System 3/8-24 UNF proximity probe. It has a 0.0 in unthreaded length, 3.5 in overall case length, 1.0 m (3.3 ft) total length and a miniature coaxial ClickLoc connector.
Item NO.:
330851-02-000-050-90Order(MOQ):
1Product Origin:
USALead Time：
2 daysBrand/ Manufacturer:
Bently NevadaDimensions:
330102-00-35-10-01-05Weight:
See official datasheetCountry of Origin: :
USADescription:
330102-00-35-10-01-05 | 3300 XL 8 mm 3/8-24 UNF Armored Proximity ProbeVERIFIED PRODUCT CONFIGURATION
330851-02-000-050-90-00-CN is a M30 x 2 Threaded Proximity Probe in the Bently Nevada 3300 XL 25 mm Proximity Transducer System. Confirm the complete ordering code and installed configuration against the official datasheet before ordering.
CONFIGURATION AT A GLANCE
SYSTEM CONFIGURATION
Match the exact model, mating components, wiring or cable route, mounting, approvals and project configuration before replacement.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the complete part number, quantity, destination and installed configuration.
PRODUCT OVERVIEW
330851-02-000-050-90-00-CN is a M30 x 2 Threaded Proximity Probe for the 3300 XL 25 mm Proximity Transducer System. The exact option values below must be compared with the supplied nameplate and installed system.
Check the installed cable route and the official 3300 XL 25 mm system configuration. The 9.0 m lead is part of this exact probe code and must not be confused with a separate extension-cable length.
Confirm the mounting thread, locknut access, bracket depth and target clearance for the 50 mm overall case. Provide enough withdrawal space to remove the probe without pulling on the 9.0 m lead.
Use a protected, supported route away from sharp edges, hot surfaces, moving parts and high-current conductors. Avoid tight coils and ensure the lead is not used as mechanical support for the probe.
Verify the actual CN nameplate marking and the applicable project or regional certification documents at receipt. Do not copy approval assumptions from the 05-suffix version of the probe.
No automatic substitution should be made. Lead length, routing, connection location, certification suffix and complete transducer-system arrangement must all be reviewed before approving a change.
Check the complete model, M30 x 2 thread, 50 mm case, 9.0 m unarmored lead, cable entry, probe tip, connector termination and CN marking; document any transport damage before stocking.
Confirm mechanical gap, cable routing and termination, then compare the channel reading with the recorded baseline and complete the applicable monitor-channel verification before returning protection to service.
State the full model with CN suffix, 50 mm case, 9.0 m lead, no armor, required quantity and mating 25 mm system components. Attach a nameplate photo when replacing an installed unit.
OFFICIAL MANUFACTURER DOCUMENTS
Use the exact-model Moore Automation manual together with the official Bently Nevada family datasheet before procurement, installation or replacement.
Two-page model-specific manual covering decoded configuration, application guidance and procurement checks.
OPEN PRODUCT MANUAL →OFFICIAL BENTLY NEVADA DOCUMENTOfficial family datasheet used for model identification and option verification.
OPEN OFFICIAL DOCUMENT →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Verify that the supplied unit carries the exact 330851-02-000-050-90-00-CN part number and matches the required hardware configuration.
MODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Part number | 330851-02-000-050-90-00-CN |
| Manufacturer | Bently Nevada |
| Product family | 3300 XL 25 mm Proximity Transducer System |
| Product type | M30 x 2 Threaded Proximity Probe |
| Probe case | M30 x 2 thread |
| Unthreaded length | 0 mm |
| Overall case length | 50 mm |
| Total length | 9.0 m (29.5 ft) |
| Armor | No armor |
| Suffix | CN - confirm supplied marking and certification |
| Country of origin | USA |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, probe, connector and armor details, packaging and visible condition. Verify that the supplied unit carries the exact 330851-02-000-050-90-00-CN part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786WHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, nameplate images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
CUSTOMER VOICES
Fast replies helped us confirm the Siemens 6GK5204-2AA00-2BD2 configuration, and the quotation details were clear.
The dispatch updates were timely and the Siemens industrial switch arrived as arranged. Professional support throughout.
Tel : +86 18030235313
Whatsapp & Wechat : +86 18030235313
Email : [email protected]
