1 Year Warranty
ER
Elena Rossi
★★★★★
Fast replies helped us confirm the Siemens 6GK5204-2AA00-2BD2 configuration, and the quotation details were clear.
QUOTE & IDENTIFICATION5.0 / 5.0
The Bently Nevada 330851-02-000-070-90-00-05 is a 3300 XL 25 mm Proximity Transducer System 3/8-24 UNF proximity probe. It has a 0.0 in unthreaded length, 3.5 in overall case length, 1.0 m (3.3 ft) total length and a miniature coaxial ClickLoc connector.
Item NO.:
330851-02-000-070-90Order(MOQ):
1Product Origin:
USALead Time：
2 daysBrand/ Manufacturer:
Bently NevadaDimensions:
330102-00-35-10-01-05Weight:
See official datasheetCountry of Origin: :
USADescription:
330102-00-35-10-01-05 | 3300 XL 8 mm 3/8-24 UNF Armored Proximity ProbeVERIFIED PRODUCT CONFIGURATION
330851-02-000-070-90-00-05 is a M30 x 2 Threaded Proximity Probe in the Bently Nevada 3300 XL 25 mm Proximity Transducer System. Confirm the complete ordering code and installed configuration against the official datasheet before ordering.
CONFIGURATION AT A GLANCE
SYSTEM CONFIGURATION
Match the exact model, mating components, wiring or cable route, mounting, approvals and project configuration before replacement.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the complete part number, quantity, destination and installed configuration.
PRODUCT OVERVIEW
330851-02-000-070-90-00-05 is a M30 x 2 Threaded Proximity Probe for the 3300 XL 25 mm Proximity Transducer System. The exact option values below must be compared with the supplied nameplate and installed system.
The longer M30 x 2 case changes bracket engagement, insertion depth and withdrawal clearance. Measure the installed mounting arrangement and compare it with the 70 mm case before ordering.
Verify the exact 25 mm Proximitor, any required extension component, monitor channel and target setup. Do not combine it with an 8 mm or NSv transducer family because the connectors appear compatible.
Confirm that a protected 9.0 m route reaches the termination point without splicing. Support the cable, avoid tight bends and mechanical exposure, and separate it from high-energy wiring according to the site design.
Inspect the M30 x 2 thread and mounting surface, verify the target condition and clearance, secure the probe without twisting the cable, then set and record the gap using the applicable 25 mm system procedure.
Compare the supplied multiple-approval markings with the hazardous-area and project requirements. Record the nameplate evidence rather than relying only on the ordering-code description.
Confirm the 70 mm case rather than the 50 mm variant, the 9.0 m lead, no-armor option and 05 approval code. Inspect the probe face, long case threads and cable entry before acceptance.
Retain the old probe position and channel baseline, document the mating transducer components and preserve the removed unit until the new loop passes gap, signal and protection-function checks.
Protect the probe tip and threads, coil the lead with a generous radius, prevent weight on the cable entry and maintain approval-document traceability through storage and transport.
OFFICIAL MANUFACTURER DOCUMENTS
Use the exact-model Moore Automation manual together with the official Bently Nevada family datasheet before procurement, installation or replacement.
Two-page model-specific manual covering decoded configuration, application guidance and procurement checks.
OPEN PRODUCT MANUAL →OFFICIAL BENTLY NEVADA DOCUMENTOfficial family datasheet used for model identification and option verification.
OPEN OFFICIAL DOCUMENT →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Verify that the supplied unit carries the exact 330851-02-000-070-90-00-05 part number and matches the required hardware configuration.
MODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Part number | 330851-02-000-070-90-00-05 |
| Manufacturer | Bently Nevada |
| Product family | 3300 XL 25 mm Proximity Transducer System |
| Product type | M30 x 2 Threaded Proximity Probe |
| Probe case | M30 x 2 thread |
| Unthreaded length | 0 mm |
| Overall case length | 70 mm |
| Total length | 9.0 m (29.5 ft) |
| Armor | No armor |
| Approvals | Multiple approvals |
| Country of origin | USA |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, probe, connector and armor details, packaging and visible condition. Verify that the supplied unit carries the exact 330851-02-000-070-90-00-05 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786WHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, nameplate images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
CUSTOMER VOICES
Fast replies helped us confirm the Siemens 6GK5204-2AA00-2BD2 configuration, and the quotation details were clear.
The dispatch updates were timely and the Siemens industrial switch arrived as arranged. Professional support throughout.
Tel : +86 18030235313
Whatsapp & Wechat : +86 18030235313
Email : [email protected]
