Part number 330903-00-10-10-01-00-CN identifies a standard-mount 3300 NSv probe with a 100 mm case, 1.0 m total length and protected ClickLoc connection.
Item NO.:
330903-00-10-10-01-0Brand/ Manufacturer:
Bently NevadaDimensions:
M8×1 thread; 43.2 mm (1.7 in) case; 1.0 m total probe lengthWeight:
Not specified for this exact configuration in Baker Hughes product literatureCountry of Origin: :
Not stated in Baker Hughes product literatureDescription:
Unarmored 3300 NSv M8×1 proximity probe with protected ClickLoc connectorThe probe is one component of the 3300 XL NSv Proximity Transducer System. Match the probe and extension-cable lengths to a compatible 5 m or 7 m 3300 XL NSv Proximitor Sensor system.
Engineering note: System performance values apply to a correctly configured probe, extension cable and Proximitor Sensor under the manufacturer test conditions. Confirm the installed target material, system length and approval markings before replacement.
Send the full part number, required quantity and destination. Request current photos, approval markings and connector details before ordering.
The Bently Nevada 330903-00-10-10-01-00-CN is a standard-mount, unarmored 3300 NSv proximity probe. The base 330903 configuration uses an M8×1 case thread without armor, while the option fields specify a 0 mm unthreaded length, 100 mm overall case length, 1.0 m total probe length, protected standard cable and the CN country-specific approval option.
The probe is one component of the 3300 XL NSv Proximity Transducer System. A complete measurement chain also requires the correctly matched 3300 NSv extension cable and 3300 XL NSv Proximitor Sensor.
Lifecycle assessment from current manufacturer evidence: Baker Hughes currently presents the 3300 XL NSv system on its official proximity-sensor page, and the current 147385 Rev. R datasheet documents the 330903 probe family. The current 108M1756 Rev. AV approvals guide also lists 330903 and supports the CN country-specific option.
The approvals guide states that products in P4 or P5 status that cannot be sold even as spares are excluded from its transducer table; 330903 remains included. This supports the conclusion that the probe family is not excluded under that P4/P5 rule.
Important: the available official documents do not assign the exact full code 330903-00-10-10-01-00-CN a formal Active, Current, Mature, P1, P2, P3, Discontinued or End-of-Life label. Current orderability, production status and lead time must therefore be confirmed with the manufacturer or sales team.
The following applications describe the complete matched NSv transducer system—not the probe by itself.
The 1.0 m probe must be paired with an extension cable so their combined electrical length equals the 5 m or 7 m Proximitor Sensor system length. Typical combinations are 1 m + 4 m or 1 m + 6 m.
The official approval guide identifies CN for hazardous-area use in China and describes NEPSI/CCC coverage as applicable, with ATEX/IECEx markings as applicable. Confirm the actual product label and certificate scope.
The Bently Nevada 330903-00-10-10-01-00-CN is an unarmored, metric standard-mount 3300 XL NSv proximity probe. It is used for non-contact radial vibration, axial position, and speed measurements on rotating machinery with tight installation constraints
The current official approval guide assigns CN to hazardous-area use in China, covering NEPSI/CCC requirements as applicable and including ATEX/IECEx markings as applicable. Confirm the supplied nameplate and certificate.
No. It must operate with a compatible 3300 NSv extension cable and a 3300 XL NSv Proximitor Sensor as a matched 5 m or 7 m system.
Official examples include centrifugal air, refrigeration and process gas compressors, plus other fluid-film bearing machines with tight counterbore, side-view or rear-view clearances.
The average scale factor is 7.87 V/mm (200 mV/mil).
It has a linear range of 1.5 mm (60 mils) with a recommended installation gap of 1.0 mm (40 mils).
Verify the full part number, case and unthreaded lengths, thread, probe construction, total electrical length, cable and connector option, CN marking, target material, gap, extension cable, Proximitor Sensor and monitoring-system requirements.
Only Baker Hughes / Bently Nevada official documents are linked below. The datasheet provides ordering and technical data; the approvals guide defines the CN option and current product-option matrix.
Document 147385 Rev. R · Ordering information, system performance, environmental limits, construction and installation data.
OPEN BAKER HUGHES PDF → OFFICIAL PDFDocument 108M1756 Rev. AV · Country-specific ordering options, CN description and the 330903 option matrix.
OPEN BAKER HUGHES PDF →Ask for current product photos, the complete nameplate, connector and probe-construction details, packaging, approval markings and a live or recorded inspection video where available. Verify that the supplied unit carries the exact 330903-00-10-10-01-00-CN code.
| Specification | Official identification / verification note |
|---|---|
| Displayed model | 330903-00-10-10-01-00-CN — exact ordering fields verified from the product model |
| System family | 3300 NSv Proximity Transducer System |
| Probe family | 330903 standard mount, M8×1 |
| Case construction | M8×1 thread, without armor |
| Unthreaded length | 00 — 0 mm unthreaded length |
| Overall case length | 10 — 100 mm case length |
| Total system length code | 10 — 1.0 meter (39 in) |
| Connector code | 01 — Miniature ClickLoc with connector protector |
| Approval code | CN — China country-specific approval option |
| Complete system chain | Probe + extension cable + Proximitor Sensor |
Official source basis: Baker Hughes / Bently Nevada 147385, 3300 XL NSv Proximity Transducer System Datasheet. System-level published performance applies only to a correctly configured system and specified target material.
More from this brand · Browse by series
Compact proximity probe models
3300 XL sensor configurations
Racks, monitors and I/O modules
Vibration and thrust transmitters
Send the full 330903-00-10-10-01-00-CN code, required quantity and delivery country. Our team can check current availability and arrange nameplate photos, packaging images or live/recorded video verification where available.
Confirm the full model, available quantity, condition and estimated dispatch time.
Check the ordering code, CN markings, connector, probe construction and visible product condition.
Receive quotation, warranty terms, delivery options and international shipping support.
Send the full model, quantity and destination for quotation and availability checking.
The entire team at Moore Automation was a pleasure to work with. They were highly professional, efficient, and walked me through the ordering process step by step. Everything was crystal clear.
I had a wonderful experience working with Tiffany. She was extremely patient with all my inquiries and made sure all my questions were answered before purchasing. Highly recommend!
Tel : +86 18030235313
Whatsapp & Wechat : +86 18030235313
Email : [email protected]
1 Year Warranty
