1 Year Warranty
AS
Ala S.★★★★★
The Moore Automation team was responsive, professional, and easy to work with. Every step of the quotation and ordering process was communicated clearly.
Company service5.0 / 5.0
Part number 330904-00-16-10-01-00 identifies a standard-mount 3300 NSv probe with a 160 mm case, 1.0 m total length and protected ClickLoc connection.
Brand/ Manufacturer:
Bently NevadaDimensions:
0 mm unthreaded / 160 mm case / 1.0 m totalWeight:
Official probe range: approx. 14–150 gCountry of Origin: :
Not specified in official datasheetDescription:
330904-00-16-10-01-00 3300 NSv M8×1 armored proximity probeThe probe is one component of the 3300 XL NSv Proximity Transducer System. Match the probe and extension-cable lengths to a compatible 5 m or 7 m 3300 XL NSv Proximitor Sensor system.
Engineering note: System performance values apply to a correctly configured probe, extension cable and Proximitor Sensor under the manufacturer test conditions. Confirm the installed target material, system length and approval markings before replacement.
Send the full part number, required quantity and destination. Request current photos, approval markings and connector details before ordering.
The Bently Nevada 330904-00-16-10-01-00 is a standard-mount, armored 3300 NSv proximity probe. The base 330904 configuration uses an M8×1 case thread with armor, while the option fields specify a 0 mm unthreaded length, 160 mm overall case length, 1.0 m total probe length, protected standard cable and agency approval code 00, which the official ordering table defines as not required.
The probe is one component of the 3300 XL NSv Proximity Transducer System. A complete measurement chain also requires the correctly matched 3300 NSv extension cable and 3300 XL NSv Proximitor Sensor.
Lifecycle assessment from current manufacturer evidence: Baker Hughes currently presents the 3300 XL NSv system in its official proximity-sensor portfolio, and the current 147385 Rev. R datasheet documents the 330904 M8×1 armored probe family and its ordering options.
These current official manufacturer resources support describing the 3300 XL NSv and 330904 family as presently documented in the product portfolio. They do not publish a formal lifecycle phase or end-of-life date for the exact full ordering code.
Important: the available official documents do not assign the exact full code 330904-00-16-10-01-00 a formal Active, Current, Mature, P1, P2, P3, Discontinued or End-of-Life label. Current orderability, production status and lead time must therefore be confirmed with the manufacturer or sales team.
The following applications describe the complete matched NSv transducer system—not the probe by itself.
The 1.0 m probe must be paired with an extension cable so their combined electrical length equals the 5 m or 7 m Proximitor Sensor system length. Typical combinations are 1 m + 4 m or 1 m + 6 m.
The official ordering table defines code 00 as agency approval not required. Confirm the complete installed nameplate and any project-specific certification requirements before replacement.
It is an armored, standard-mount 3300 NSv proximity probe with an M8×1 thread, 0 mm unthreaded section, 160 mm case, 1.0 m total length, protected standard ClickLoc cable and agency approval code 00 (not required).
The official 147385 Rev. R ordering table defines agency approval code 00 as not required. Confirm the complete installed nameplate and any project-specific certification requirements.
No. It must operate with a compatible 3300 NSv extension cable and a 3300 XL NSv Proximitor Sensor as a matched 5 m or 7 m system.
Official examples include centrifugal air, refrigeration and process gas compressors, plus other fluid-film bearing machines with tight counterbore, side-view or rear-view clearances.
A complete correctly configured system supports radial vibration and position, axial thrust position, tachometer and zero-speed measurements, and Keyphasor phase-reference signals.
Current official Baker Hughes pages and the 147385 Rev. R datasheet continue to list the 3300 XL NSv system and 330904 family, but they do not assign the exact full code a formal lifecycle phase. Availability should be confirmed for each order.
Verify the full part number, case and unthreaded lengths, thread, armor, total electrical length, cable, connector and approval code, target material, gap, extension cable, Proximitor Sensor and monitoring-system requirements.
Only Baker Hughes / Bently Nevada official resources are linked below. The datasheet provides the ordering and technical data; the product portfolio page confirms the 3300 XL NSv system is currently presented by the manufacturer.
Document 147385 Rev. R · Ordering information, system performance, environmental limits, construction and installation data.
OPEN BAKER HUGHES PDF → OFFICIAL PDFOfficial Baker Hughes product portfolio page · 3300 XL NSv applications, product positioning and access to the current manufacturer datasheet.
OPEN BAKER HUGHES PAGE →Ask for current product photos, the complete nameplate, connector and armor details, packaging, approval markings and a live or recorded inspection video where available. Verify that the supplied unit carries the exact 330904-00-16-10-01-00 code.
| Specification | Official identification / verification note |
|---|---|
| Displayed model | 330904-00-16-10-01-00 — exact ordering fields verified from the product model |
| System family | 3300 NSv Proximity Transducer System |
| Probe family | 330904 standard mount, M8×1 |
| Probe tip diameter | 8 mm |
| Unthreaded length | 00 — 0 mm unthreaded length |
| Overall case length | 16 — 160 mm case length |
| Total system length code | 10 — 1.0 meter (39 in) |
| Connector code | 01 — Miniature ClickLoc with connector protector |
| Approval code | 00 — Agency approval not required |
| Complete system chain | Probe + extension cable + Proximitor Sensor |
Official source basis: Baker Hughes / Bently Nevada 147385, 3300 XL NSv Proximity Transducer System Datasheet. System-level published performance applies only to a correctly configured system and specified target material.
More from this brand · Browse by series
Compact proximity probe models
3300 XL sensor configurations
Racks, monitors and I/O modules
Vibration and thrust transmitters
Send the full 330904-00-16-10-01-00 code, required quantity and delivery country. Our team can check current availability and arrange nameplate photos, packaging images or live/recorded video verification where available.
Confirm the full model, available quantity, condition and estimated dispatch time.
Check the complete ordering code, approval code, connector, armor and visible product condition.
Receive quotation, warranty terms, delivery options and international shipping support.
Send the full model, quantity and destination for quotation and availability checking.
The Moore Automation team was responsive, professional, and easy to work with. Every step of the quotation and ordering process was communicated clearly.
Tiffany provided patient and thoughtful support throughout the inquiry. Her prompt follow-up and clear answers made the purchasing process smooth and reassuring.
Tel : +86 18030235313
Whatsapp & Wechat : +86 18030235313
Email : [email protected]
