1 Year Warranty
ER
Elena Rossi
★★★★★
Fast replies helped us confirm the Siemens 6GK5204-2AA00-2BD2 configuration, and the quotation details were clear.
QUOTE & IDENTIFICATION5.0 / 5.0
The Bently Nevada 330905-00-07-10-02-05 is a 3300 XL NSv Proximity Transducer System 3/8-24 UNF proximity probe. It has a 0.0 in unthreaded length, 3.5 in overall case length, 1.0 m (3.3 ft) total length and a miniature coaxial ClickLoc connector.
Item NO.:
330905-00-07-10-02-0Order(MOQ):
1Product Origin:
USALead Time：
2 daysBrand/ Manufacturer:
Bently NevadaDimensions:
330102-00-35-10-01-05Weight:
See official datasheetCountry of Origin: :
USADescription:
330102-00-35-10-01-05 | 3300 XL 8 mm 3/8-24 UNF Armored Proximity ProbeVERIFIED PRODUCT CONFIGURATION
330905-00-07-10-02-05 is a M10 x 1 Proximity Probe without Armor in the Bently Nevada 3300 XL NSv Proximity Transducer System. Confirm the complete ordering code and installed configuration against the official datasheet before ordering.
CONFIGURATION AT A GLANCE
SYSTEM CONFIGURATION
Match the exact model, mating components, wiring or cable route, mounting, approvals and project configuration before replacement.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the complete part number, quantity, destination and installed configuration.
PRODUCT OVERVIEW
330905-00-07-10-02-05 is a M10 x 1 Proximity Probe without Armor for the 3300 XL NSv Proximity Transducer System. The exact option values below must be compared with the supplied nameplate and installed system.
Match the NSv probe, extension cable if used, Proximitor sensor and monitor input as one documented system. Verify the complete model and M10 x 1 case rather than using an 8 mm-family part by appearance.
Check the bracket depth, thread engagement, target clearance and withdrawal space for the 70 mm overall case. Confirm that the mounting arrangement permits stable gap adjustment without side-loading the probe.
Route it inside the protection method specified by the machine design, support it near the probe and connector, and keep it clear of abrasion, heat, oil exposure beyond its rating and moving components.
Record the mechanical position and gap or reference voltage, verify connector seating and cable routing, then compare the channel response with the previous baseline and complete the required alarm or trip functional test.
Only after reviewing clearance, cable protection, connector option, approvals and the complete ordering code. Armor changes the mechanical installation and is not an automatic upgrade.
Confirm the complete model, 0 mm unthreaded length, 70 mm case, 1.0 m lead, ClickLoc standard cable, no armor and multiple-approval markings; photograph the nameplate before stocking.
Provide the installed probe, extension cable and Proximitor models, mounting thread, case length, system length, approval requirement, channel criticality and the planned outage window.
Cap the connector, protect the thread and probe tip, avoid tight cable bends at the case entry, retain approval traceability and perform a visual and permitted electrical check before installation.
OFFICIAL MANUFACTURER DOCUMENTS
Use the exact-model Moore Automation manual together with the official Bently Nevada family datasheet before procurement, installation or replacement.
Two-page model-specific manual covering decoded configuration, application guidance and procurement checks.
OPEN PRODUCT MANUAL →OFFICIAL BENTLY NEVADA DOCUMENTOfficial family datasheet used for model identification and option verification.
OPEN OFFICIAL DOCUMENT →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Verify that the supplied unit carries the exact 330905-00-07-10-02-05 part number and matches the required hardware configuration.
MODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Part number | 330905-00-07-10-02-05 |
| Manufacturer | Bently Nevada |
| Product family | 3300 XL NSv Proximity Transducer System |
| Product type | M10 x 1 Proximity Probe without Armor |
| Unthreaded length | 0 mm |
| Overall case length | 70 mm |
| Total length | 1.0 m (39 in) |
| Connector / cable | ClickLoc connector; standard cable |
| Armor | Without armor |
| Approvals | Multiple approvals |
| Country of origin | USA |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, probe, connector and armor details, packaging and visible condition. Verify that the supplied unit carries the exact 330905-00-07-10-02-05 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786WHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, nameplate images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
CUSTOMER VOICES
Fast replies helped us confirm the Siemens 6GK5204-2AA00-2BD2 configuration, and the quotation details were clear.
The dispatch updates were timely and the Siemens industrial switch arrived as arranged. Professional support throughout.
Tel : +86 18030235313
Whatsapp & Wechat : +86 18030235313
Email : [email protected]
