1 Year Warranty
ER
Elena Rossi
★★★★★
Fast replies helped us confirm the Siemens 6GK5204-2AA00-2BD2 configuration, and the quotation details were clear.
QUOTE & IDENTIFICATION5.0 / 5.0
The Bently Nevada 330930-040-00-CN is a 3300 XL NSv Proximity Transducer System 3/8-24 UNF proximity probe. It has a 0.0 in unthreaded length, 3.5 in overall case length, 1.0 m (3.3 ft) total length and a miniature coaxial ClickLoc connector.
Item NO.:
330930-040-00-CNOrder(MOQ):
1Product Origin:
USALead Time：
2 daysBrand/ Manufacturer:
Bently NevadaDimensions:
330102-00-35-10-01-05Weight:
See official datasheetCountry of Origin: :
USADescription:
330102-00-35-10-01-05 | 3300 XL 8 mm 3/8-24 UNF Armored Proximity ProbeVERIFIED PRODUCT CONFIGURATION
330930-040-00-CN is a 3300 NSv Extension Cable in the Bently Nevada 3300 XL NSv Proximity Transducer System. Confirm the complete ordering code and installed configuration against the official datasheet before ordering.
CONFIGURATION AT A GLANCE
SYSTEM CONFIGURATION
Match the exact model, mating components, wiring or cable route, mounting, approvals and project configuration before replacement.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the complete part number, quantity, destination and installed configuration.
PRODUCT OVERVIEW
330930-040-00-CN is a 3300 NSv Extension Cable for the 3300 XL NSv Proximity Transducer System. The exact option values below must be compared with the supplied nameplate and installed system.
Combine the 4.0 m extension cable with the installed NSv probe lead and verify that the result matches the system length required by the Proximitor sensor. Never select the cable length independently.
Record the exact NSv probe and Proximitor models, existing extension-cable code, connector arrangement and required total system length. A connector photo alone is not sufficient identification.
Use the conduit, tray or guarded route required by the site design, maintain suitable bend radius and support both connectors. Keep the cable away from crushing, heat, sharp edges and high-energy wiring.
Check the supplied cable marking and applicable certification documents for the CN configuration. Confirm that they satisfy the project and destination requirements before the cable is released for installation.
Do not substitute cable lengths by coiling excess cable. A different length changes the documented transducer-system configuration and must be reviewed with the probe and Proximitor as a complete loop.
Verify the exact part number, 4.0 m length, no-armor construction, CN marking and connector condition. Inspect the jacket for cuts, crushing or sharp bends caused during shipment.
Document the original route, connector orientation, probe and Proximitor models and pre-work channel reading. Retain the old cable until the rebuilt loop passes connection, signal and protection-function checks.
Store it loosely coiled with connectors capped, packaging dry and CN traceability visible. Reinspect length, jacket and connector pins before issuing the cable to a maintenance team.
OFFICIAL MANUFACTURER DOCUMENTS
Use the exact-model Moore Automation manual together with the official Bently Nevada family datasheet before procurement, installation or replacement.
Two-page model-specific manual covering decoded configuration, application guidance and procurement checks.
OPEN PRODUCT MANUAL →OFFICIAL BENTLY NEVADA DOCUMENTOfficial family datasheet used for model identification and option verification.
OPEN OFFICIAL DOCUMENT →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Verify that the supplied unit carries the exact 330930-040-00-CN part number and matches the required hardware configuration.
MODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Part number | 330930-040-00-CN |
| Manufacturer | Bently Nevada |
| Product family | 3300 XL NSv Proximity Transducer System |
| Product type | 3300 NSv Extension Cable |
| Cable length | 4.0 m (13.1 ft) |
| Cable option | Without stainless-steel armor |
| Suffix | CN - confirm supplied marking and certification |
| System matching | Probe plus extension cable must equal Proximitor system length |
| Country of origin | USA |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, probe, connector and armor details, packaging and visible condition. Verify that the supplied unit carries the exact 330930-040-00-CN part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786WHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, nameplate images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
CUSTOMER VOICES
Fast replies helped us confirm the Siemens 6GK5204-2AA00-2BD2 configuration, and the quotation details were clear.
The dispatch updates were timely and the Siemens industrial switch arrived as arranged. Professional support throughout.
Tel : +86 18030235313
Whatsapp & Wechat : +86 18030235313
Email : [email protected]
