1 Year Warranty
ER
Elena Rossi
★★★★★
Fast replies helped us confirm the Siemens 6GK5204-2AA00-2BD2 configuration, and the quotation details were clear.
QUOTE & IDENTIFICATION5.0 / 5.0
The Bently Nevada 3500/05-01-02-01-00-00 is a 3500 Machinery Protection System 3/8-24 UNF proximity probe. It has a 0.0 in unthreaded length, 3.5 in overall case length, 1.0 m (3.3 ft) total length and a miniature coaxial ClickLoc connector.
Item NO.:
3500/05-01-02-01-00-Order(MOQ):
1Product Origin:
USALead Time：
2 daysBrand/ Manufacturer:
Bently NevadaDimensions:
330102-00-35-10-01-05Weight:
See official datasheetCountry of Origin: :
USADescription:
330102-00-35-10-01-05 | 3300 XL 8 mm 3/8-24 UNF Armored Proximity ProbeVERIFIED PRODUCT CONFIGURATION
3500/05-01-02-01-00-00 is a 3500/05 Full-Size System Rack in the Bently Nevada 3500 Machinery Protection System. Confirm the complete ordering code and installed configuration against the official datasheet before ordering.
CONFIGURATION AT A GLANCE
SYSTEM CONFIGURATION
Match the exact model, mating components, wiring or cable route, mounting, approvals and project configuration before replacement.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the complete part number, quantity, destination and installed configuration.
PRODUCT OVERVIEW
3500/05-01-02-01-00-00 is a 3500/05 Full-Size System Rack for the 3500 Machinery Protection System. The exact option values below must be compared with the supplied nameplate and installed system.
Confirm the complete rack ordering code, 14-slot backplane arrangement, power-supply positions, system interface requirements and each installed module type. Physical slot fit alone does not prove configuration compatibility.
Verify 19-inch EIA rail dimensions, rack depth, front and rear service clearance, cable entry, grounding arrangement and ventilation. Confirm that the enclosure and site layout support safe module insertion and maintenance.
Export or document the existing rack configuration, label every module and cable, record slot positions and compare the planned arrangement with the approved system drawings before moving hardware.
Check the supplied CSA/NRTL/C nameplate and installation requirements against the classified-area design. The rack approval does not replace verification of every installed module, enclosure and wiring method.
Not without an engineering review. Compare rack size, mounting option, backplane, power supplies, module count, cabling, enclosure clearance and certification before approving replacement.
Confirm model and approval marking, inspect the 14-slot chassis and backplane, check mounting hardware and connectors for damage, and record the condition before any module is installed.
Keep the original slot map, configuration backups and wiring labels; install modules in the approved sequence and verify communications, channel status and protection functions before releasing the old rack.
Protect the backplane and connectors from dust, static and impact, retain mounting and approval documentation, control humidity and inspect chassis alignment before installing modules.
OFFICIAL MANUFACTURER DOCUMENTS
Use the exact-model Moore Automation manual together with the official Bently Nevada family datasheet before procurement, installation or replacement.
Two-page model-specific manual covering decoded configuration, application guidance and procurement checks.
OPEN PRODUCT MANUAL →OFFICIAL BENTLY NEVADA DOCUMENTOfficial family datasheet used for model identification and option verification.
OPEN OFFICIAL DOCUMENT →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Verify that the supplied unit carries the exact 3500/05-01-02-01-00-00 part number and matches the required hardware configuration.
MODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Part number | 3500/05-01-02-01-00-00 |
| Manufacturer | Bently Nevada |
| Product family | 3500 Machinery Protection System |
| Product type | 3500/05 Full-Size System Rack |
| Rack size | 19-inch full-size rack; 14 module slots |
| Mounting option | Rack mount for 19-inch EIA rails |
| Agency approval | CSA/NRTL/C Class 1 Division 2 |
| Reserved option | None |
| European compliance | Not selected |
| Country of origin | USA |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, probe, connector and armor details, packaging and visible condition. Verify that the supplied unit carries the exact 3500/05-01-02-01-00-00 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786WHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, nameplate images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
CUSTOMER VOICES
Fast replies helped us confirm the Siemens 6GK5204-2AA00-2BD2 configuration, and the quotation details were clear.
The dispatch updates were timely and the Siemens industrial switch arrived as arranged. Professional support throughout.
Tel : +86 18030235313
Whatsapp & Wechat : +86 18030235313
Email : [email protected]
