1 Year Warranty
ER
Elena Rossi
★★★★★
Fast replies helped us confirm the Siemens 6GK5204-2AA00-2BD2 configuration, and the quotation details were clear.
QUOTE & IDENTIFICATION5.0 / 5.0
The Bently Nevada 3500/60 133811-01 is a 3500 Machinery Protection System 3/8-24 UNF proximity probe. It has a 0.0 in unthreaded length, 3.5 in overall case length, 1.0 m (3.3 ft) total length and a miniature coaxial ClickLoc connector.
Item NO.:
3500/60 133811-01Order(MOQ):
1Product Origin:
USALead Time：
2 daysBrand/ Manufacturer:
Bently NevadaDimensions:
330102-00-35-10-01-05Weight:
See official datasheetCountry of Origin: :
USADescription:
330102-00-35-10-01-05 | 3300 XL 8 mm 3/8-24 UNF Armored Proximity ProbeVERIFIED PRODUCT CONFIGURATION
3500/60 133811-01 is a 3500/60 Temperature Monitor Assembly in the Bently Nevada 3500 Machinery Protection System. Confirm the complete ordering code and installed configuration against the official datasheet before ordering.
CONFIGURATION AT A GLANCE
SYSTEM CONFIGURATION
Match the exact model, mating components, wiring or cable route, mounting, approvals and project configuration before replacement.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the complete part number, quantity, destination and installed configuration.
PRODUCT OVERVIEW
3500/60 133811-01 is a 3500/60 Temperature Monitor Assembly for the 3500 Machinery Protection System. The exact option values below must be compared with the supplied nameplate and installed system.
Confirm the installed 3500/60 monitor, compatible I/O module, internal or external termination arrangement and rack configuration. The assembly reference alone does not identify every required field-termination component.
List the sensor type on each of the six channels, wiring method, engineering units and expected operating range. Verify that the selected I/O and configured channel type support each field sensor.
Save or document channel sensor types, ranges, alarm and danger setpoints, voting or relay logic references, bypass state and rack slot assignment before removing the existing temperature monitor.
Verify channel numbering, polarity where applicable, RTD lead arrangement, shield and common connections and termination torque against the approved drawings. Keep temperature-sensor wiring separated from noise sources as specified by the project.
Do not assume interchangeability. Compare channel functions, I/O module, configuration, rack compatibility, sensor inputs and protection logic, then obtain project approval before any migration.
Verify the exact assembly reference and 3500/60 marking, inspect card-edge and front-panel condition, confirm included subassemblies and record serial or revision information before controlled storage.
Validate each channel with the appropriate sensor simulator or approved test method, confirm scaling and units, check alarm and danger operation and compare displayed values with the documented pre-work baseline.
Store the correct I/O module requirement, configuration backup, firmware or revision record, slot assignment and latest loop drawings with the spare; perform antistatic inspection before installation.
OFFICIAL MANUFACTURER DOCUMENTS
Use the exact-model Moore Automation manual together with the official Bently Nevada family datasheet before procurement, installation or replacement.
Two-page model-specific manual covering decoded configuration, application guidance and procurement checks.
OPEN PRODUCT MANUAL →OFFICIAL BENTLY NEVADA DOCUMENTOfficial family datasheet used for model identification and option verification.
OPEN OFFICIAL DOCUMENT →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Verify that the supplied unit carries the exact 3500/60 133811-01 part number and matches the required hardware configuration.
MODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Part number | 3500/60 133811-01 |
| Manufacturer | Bently Nevada |
| Product family | 3500 Machinery Protection System |
| Product type | 3500/60 Temperature Monitor Assembly |
| Monitor family | 3500/60 Temperature Module |
| Assembly reference | 133811-01 - confirm supplied nameplate |
| Inputs | Six temperature channels |
| Supported sensors | RTD and thermocouple according to selected I/O module |
| Configuration | Confirm I/O module, termination and approval option |
| Country of origin | USA |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, probe, connector and armor details, packaging and visible condition. Verify that the supplied unit carries the exact 3500/60 133811-01 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786WHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, nameplate images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
CUSTOMER VOICES
Fast replies helped us confirm the Siemens 6GK5204-2AA00-2BD2 configuration, and the quotation details were clear.
The dispatch updates were timely and the Siemens industrial switch arrived as arranged. Professional support throughout.
Tel : +86 18030235313
Whatsapp & Wechat : +86 18030235313
Email : [email protected]
