1 Year Warranty
ER
Elena Rossi
★★★★★
Fast replies helped us confirm the ABB 3AUA489002B5047 NDNA-02-KIT configuration, and the quotation details were clear.
QUOTE & IDENTIFICATION5.0 / 5.0
The ABB 3AUA489002B5047 NDNA-02-KIT is an ABB ndna-02 drive adapter kit for 8 DI, 8 DO and 8 configurable I/O; verified host-system hardware within the ABB Drive Accessories platform.
Item NO.:
3AUA489002B5047Order(MOQ):
1Product Origin:
SwedenLead Time：
2 daysBrand/ Manufacturer:
ABBDimensions:
3AUA489002B5047 NDNA-02-KITWeight:
NDNA-02 Drive Adapter KitCountry of Origin: :
SwedenDescription:
3AUA489002B5047 NDNA-02-KIT | NDNA-02 Drive Adapter KitVERIFIED PRODUCT CONFIGURATION
NDNA-02 Drive Adapter Kit is a NDNA-02 Drive Adapter Kit from the ABB Drive Accessories family. Confirm the exact article number, supply, rated function, terminal wiring and approvals before ordering.
CONFIGURATION AT A GLANCE
System Configuration
Confirm supply and rated load, wiring, DIN rail; vertical or horizontal and ambient conditions against ABB documentation before replacement.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the complete part number, required quantity, destination and installed configuration for quotation and availability checking.
好PRODUCT OVERVIEW
3AUA489002B5047 NDNA-02-KIT is a NDNA-02 Drive Adapter Kit, using 24 V DC input, 8 DI, 8 DO and 8 configurable I/O; verified host-system hardware and documented manufacturer functionality. ABB lists 8 DI, 8 DO and 8 configurable I/O; verified host-system hardware, documented product functionality, Current ABB official selector record and Current ABB official selector record.
Lifecycle assessment from current manufacturer evidence: ABB documents 3AUA489002B5047 NDNA-02-KIT in its current official ABB Drive Accessories hardware selector.
Important: Verify article number 3AUA489002B5047 NDNA-02-KIT, ABB Drive Accessories configuration, the exact installed configuration and compatible terminal unit before ordering.
Compare the kit code, packing list, adapter identity, cables, mounting items and instructions with the specific ABB drive and option requirement.
Confirm compatibility in the applicable ABB drive documentation using the exact drive type code, control-unit hardware and firmware revision.
Record node addressing, baud rate, termination, cable topology, parameter mappings and the current drive parameter backup.
Check every listed component, connector condition, cable identifiers, mounting hardware, labels and sealed packaging before releasing the kit to installation.
Follow the documented cable type and shield practice, maintain network polarity and termination, separate signal wiring from power conductors and label both ends.
Verify adapter diagnostics, network status, drive data exchange, command ownership, fault behavior and recovery after a controlled communication interruption.
Only after confirming protocol, physical interface, supported drive family, parameter mapping and system-controller configuration; similar form factor is insufficient.
Provide 3AUA489002B5047, the exact drive type, control-unit and firmware details, required protocol, existing adapter code, quantity and delivery destination.
OFFICIAL MANUFACTURER DOCUMENTS
Use official ABB sources for the exact NDNA-02 Drive Adapter Kit part. Confirm hardware version, configuration, installed electrical ratings and project configuration before replacement.
Two-page model-specific manual covering exact configuration, product reference data, application guidance and procurement checks.
OPEN PRODUCT MANUAL →OFFICIAL SUPPORT PAGEOfficial product support entry for the specified ABB part number.
OPEN OFFICIAL SUPPORT →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, connections, housing and nameplate details, packaging and visible condition. Verify that the supplied unit carries the exact 3AUA489002B5047 NDNA-02-KIT part number.
REQUEST PHOTO / VIDEOWHATSAPP / WECHATMODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Manufacturer | ABB |
| Product family | ABB Drive Accessories |
| Product type | Module termination unit |
| Article number | 3AUA489002B5047 NDNA-02-KIT |
| Power input | 24 V DC |
| Communication | Modbus TCP |
| Configuration | 8 DI, 8 DO and 8 configurable I/O; verified host-system hardware |
| Mounting | DIN rail; vertical or horizontal |
| Dimensions (W × H × D) | Confirm with official ABB documentation |
| Net weight | 0.45 kg |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, connections, housing and nameplate details, packaging and visible condition. Verify that the supplied unit carries the exact 3AUA489002B5047 NDNA-02-KIT part number.
REQUEST PHOTO / VIDEOWHATSAPP / WECHATWHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, nameplate images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
CUSTOMER VOICES
Fast replies helped us confirm the ABB 3AUA489002B5047 NDNA-02-KIT configuration, and the quotation details were clear.
The dispatch updates were timely and the ABB product arrived as arranged. Professional support throughout.
Tel : +86 18030235313
Whatsapp & Wechat : +86 18030235313
Email : [email protected]
