Model CC-GDOL11 identifies a redundant galvanic-isolation/intrinsic-safety digital output IOTA listed with CC-PDOB01 and the CC-SDXX01 expander for supported source-output isolator applications.
Item NO.:
CC-GDOL11Brand/ Manufacturer:
HoneywellDimensions:
Verify exact assembly dimensions before installationWeight:
Not stated in the cited Honeywell product recordsCountry of Origin: :
Confirm on supplied product documentationDescription:
redundant GI/IS digital output IOTAConfirm the exact product identity, connected hardware, field interface and current project release before installation.
Engineering note: Verify the redundant arrangement, CC-PDOB01 interface, CC-SDXX01 expander, source-output characteristic and approved galvanic-isolator wiring before replacement.
Installation planning
Confirm CC-GDOL11 enclosure protection, cabinet airflow, mounting arrangement and documented temperature limits before installation.
Storage and handling
Keep CC-GDOL11 protected from moisture, contamination, impact and electrostatic discharge from receipt through installation.
Send the exact model, required quantity, destination and installed-hardware details. Request current nameplate photographs and confirm the required configuration before ordering.
A redundant galvanic-isolation/intrinsic-safety digital output IOTA listed with CC-PDOB01 and the CC-SDXX01 expander for source-output applications through supported isolators.
Use the complete model, connected hardware and project definition when selecting a replacement. Physical similarity alone does not establish interchangeability.
Lifecycle assessment from the cited manufacturer evidence: Honeywell Experion Series C I/O Specification, EP03-490-520, Version 1.5 identifies the exact model or its documented hardware configuration, but the available source does not assign CC-GDOL11 a formal Active, Current, Mature, Discontinued or End-of-Life phase.
Ordering check: Confirm current stock, hardware revision, support status and exact replacement requirements with Tiffany before ordering.
These six checks apply to the exact installed assembly and should be completed against the current project documentation.
Retain the isolator entity-parameter comparison and terminal-segregation drawing in the project verification record.
For handover, document the commanded output, diagnostic indication and configured safe-state response on both redundant paths.
It is the GI/IS digital output IOTA used in a redundant Series C output arrangement.
Honeywell's function matrix lists CC-PDOB01 with CC-GDOL11.
Yes. CC-SDXX01 is listed with the CC-GDOL11 output path.
The Honeywell matrix identifies a source output with 48 mA for this GI/IS arrangement.
No. Use only isolators supported by the exact Honeywell assembly and verify hazardous-area documentation before installation.
No. It is a GI/IS termination assembly. Standard bussed-output IOTAs for CC-PDOB01 are listed separately.
Verify both hardware paths, the expander, isolators, power, diagnostics and the project's redundant channel assignment.
Review the approved loop drawing, isolator documentation, entity parameters, grounding and cable-segregation requirements.
Verify channel mapping, diagnostic state, safe-state behavior, redundancy health and controlled field actuation.
No. CC-GDOL11 is a digital output IOTA, while CC-GDIL21 is a digital input IOTA.
Both PDFs are hosted on dcsmodule.com and prepared from the exact official manufacturer records cited on this page. They are independent Moore Automation references, not manufacturer-issued manuals.
Exact article identity, application context, procurement checks, replacement guidance and manufacturer-source trace.
OPEN SITE PDF → TECHNICAL DATAModel-specific specifications, compatibility boundaries, installation checks, commissioning guidance and official-source trace.
OPEN TECHNICAL DATA PDF →Ask for the exact CC-GDOL11 nameplate, redundant arrangement, CC-PDOB01 and CC-SDXX01 assembly details, isolator configuration, field terminals and approval markings. Verify that the supplied unit carries the exact CC-GDOL11 identification.
| Specification | Official identification / verification note |
|---|---|
| Model | CC-GDOL11 |
| Hardware type | GI/IS digital output IOTA |
| Arrangement | Redundant |
| Listed IOM | CC-PDOB01 |
| Listed expander | CC-SDXX01 |
| Output characteristic | Source, 48 mA in the Honeywell function matrix |
| Application | Digital output paths using supported galvanic isolators |
Technical-data note: Values shown here are limited to the exact model and explicitly documented assembly. Confirm field conditions and the applicable project release before installation.
More from this brand · Browse by category
Same-brand Honeywell modules and I/O assemblies
Control and I/O hardware for related engineering work
Termination, carrier and interface product references
Verified condition-monitoring product references
Send the full CC-GDOL11 model, required quantity and delivery country. Our team can check current availability and arrange nameplate photos, packaging images or live/recorded video verification where available.
Confirm the exact model, available quantity, condition and estimated dispatch time.
Check the exact model, hardware identification, revision and visible product condition.
Receive quotation, warranty terms, delivery options and international shipping support.
Send the full model, quantity and destination for quotation and availability checking.
Moore Automation provided a clear quotation and kept the requested order details visible throughout the discussion.
Tiffany handled the follow-up attentively and kept the technical verification points concise and understandable.
Tel : +8618020776786
Whatsapp & Wechat : +8618020776786
Email : [email protected]
1 Year Warranty
