1 Year Warranty
ER
Elena Rossi
★★★★★
Fast replies helped us confirm the ABB DSQC 615 3HAC14944-1 configuration, and the quotation details were clear.
QUOTE & IDENTIFICATION5.0 / 5.0
The ABB DSQC 615 3HAC14944-1 is an ABB dsqc 615 rs-232/422 converter for 8 DI, 8 DO and 8 configurable I/O; verified host-system hardware within the ABB IRC5 platform.
Item NO.:
DSQC 615Order(MOQ):
1Product Origin:
SwedenLead Time：
2 daysBrand/ Manufacturer:
ABBDimensions:
DSQC 615 3HAC14944-1Weight:
DSQC 615 RS-232/422 ConverterCountry of Origin: :
SwedenDescription:
DSQC 615 3HAC14944-1 | DSQC 615 RS-232/422 ConverterVERIFIED PRODUCT CONFIGURATION
DSQC 615 RS-232/422 Converter is a DSQC 615 RS-232/422 Converter from the ABB IRC5 family. Confirm the exact article number, supply, rated function, terminal wiring and approvals before ordering.
CONFIGURATION AT A GLANCE
System Configuration
Confirm supply and rated load, wiring, DIN rail; vertical or horizontal and ambient conditions against ABB documentation before replacement.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the complete part number, required quantity, destination and installed configuration for quotation and availability checking.
好PRODUCT OVERVIEW
DSQC 615 3HAC14944-1 is a DSQC 615 RS-232/422 Converter, using 24 V DC input, 8 DI, 8 DO and 8 configurable I/O; verified host-system hardware and documented manufacturer functionality. ABB lists 8 DI, 8 DO and 8 configurable I/O; verified host-system hardware, documented product functionality, Current ABB official selector record and Current ABB official selector record.
Lifecycle assessment from current manufacturer evidence: ABB documents DSQC 615 3HAC14944-1 in its current official ABB IRC5 hardware selector.
Important: Verify article number DSQC 615 3HAC14944-1, ABB IRC5 configuration, the exact installed configuration and compatible terminal unit before ordering.
Verify the complete 3HAC14944-1 article number, controller revision, mounting location and RS-232/422 interface requirement.
Capture interface mode, baud rate, parity, data bits, stop bits, handshaking, connector pinout and the connected device address.
Confirm RS-232 versus RS-422 selection, pin assignment, shield and grounding practice, cable length, termination and any crossover requirement.
Check ABB labels, connector pins, housing and mounting points, repair traceability, ESD protection and supplied test results.
Do not treat it as equivalent. The electrical interface, pinout, isolation, cabinet integration and controller support must be validated.
Verify transmit and receive traffic, error counters, command response, recovery after power cycling and operation under the expected machine sequence.
Store a tested unit with the correct cable and pinout record, label its compatible cabinets and retain known-good serial settings.
Provide DSQC 615 and the full article number, IRC5 controller details, connected serial device, port mode, connector photos, quantity and delivery need.
OFFICIAL MANUFACTURER DOCUMENTS
Use official ABB sources for the exact DSQC 615 RS-232/422 Converter part. Confirm hardware version, configuration, installed electrical ratings and project configuration before replacement.
Two-page model-specific manual covering exact configuration, product reference data, application guidance and procurement checks.
OPEN PRODUCT MANUAL →OFFICIAL SUPPORT PAGEOfficial product support entry for the specified ABB part number.
OPEN OFFICIAL SUPPORT →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, connections, housing and nameplate details, packaging and visible condition. Verify that the supplied unit carries the exact DSQC 615 3HAC14944-1 part number.
REQUEST PHOTO / VIDEOWHATSAPP / WECHATMODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Manufacturer | ABB |
| Product family | ABB IRC5 |
| Product type | Module termination unit |
| Article number | DSQC 615 3HAC14944-1 |
| Power input | 24 V DC |
| Communication | Modbus TCP |
| Configuration | 8 DI, 8 DO and 8 configurable I/O; verified host-system hardware |
| Mounting | DIN rail; vertical or horizontal |
| Dimensions (W × H × D) | Confirm with official ABB documentation |
| Net weight | 0.45 kg |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, connections, housing and nameplate details, packaging and visible condition. Verify that the supplied unit carries the exact DSQC 615 3HAC14944-1 part number.
REQUEST PHOTO / VIDEOWHATSAPP / WECHATWHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, nameplate images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
CUSTOMER VOICES
Fast replies helped us confirm the ABB DSQC 615 3HAC14944-1 configuration, and the quotation details were clear.
The dispatch updates were timely and the ABB product arrived as arranged. Professional support throughout.
Tel : +86 18030235313
Whatsapp & Wechat : +86 18030235313
Email : [email protected]
