IC200ALG262G is a GE Fanuc VersaMax VersaMax analog current input module with a 4–20 mA default range and eight current-input channels. Check the baseplate, power budget and loop wiring and scaling before replacement.
Item NO.:
IC200ALG262GOrder(MOQ):
1Product Origin:
USALead Time：
2 daysBrand/ Manufacturer:
GE FanucDimensions:
Not stated in the cited hardware specificationsWeight:
Not stated in the cited hardware specificationsCountry of Origin: :
USADescription:
IC200ALG262G | Analog Current Input ModuleVERIFIED PRODUCT CONFIGURATION
IC200ALG262G is a VersaMax analog current input module for the GE Fanuc VersaMax platform. Match the saved project, host CPU or NIU and loop wiring hardware before replacement.
CONFIGURATION AT A GLANCE
System Configuration
Count all host CPU or NIU, allow the documented 5 VDC backplane demand and preserve the serial input configurationming arrangement.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the complete part number, required quantity, destination and installed configuration for quotation and availability checking.
PRODUCT OVERVIEW
IC200ALG262G is a VersaMax analog input module for legacy PLC applications. Evaluate the saved input configuration, rack count and loop wiring arrangement as a complete system before selecting a replacement.
Manufacturer documentation: GE Fanuc GFK-1999H provides the VersaMax analog input specifications. This historical manual does not establish current production or lifecycle status.
Important: Match IC200ALG262G, host CPU or NIU, power supply and loop wiring modules to the saved I/O configuration before ordering.
First compare the complete catalog number, host CPU or NIU firmware, configured current range and channel scaling. Back up the existing hardware configuration before installing the replacement; do not assume revision interchangeability from the connector shape alone.
Use the module for current-loop measurements that match the documented 4–20 mA default or the jumper-selected 0–20 mA range. Confirm every transmitter output, loop supply and engineering-unit scale before assigning a channel.
Record the existing range selection, place the module jumper in the required position with power removed, and make the PLC configuration and scaling agree with that choice. Verify the setting on all eight loops during commissioning.
No. The backplane supplies the module electronics, while field transmitters require their own correctly rated loop supply. Check polarity, return paths and the available voltage at the transmitter under operating load.
Treat the eight inputs as one group rather than assuming channel-to-channel isolation. Review common-mode limits, shield termination and ground-potential differences, then correct any unwanted current path before connecting process instruments.
Inject known low, mid-scale and high current values into every used channel. Compare raw counts, engineering-unit readings, alarm behavior and open-wire diagnostics with the approved loop sheets and saved PLC application.
Provide the exact catalog and revision markings, quantity, host CPU or NIU, current-range requirement, terminal-base details and destination. Ask for current nameplate photographs so purchasing can match the offered unit to the installed asset record.
Photograph the label and connector area, record condition and traceability, confirm the range jumper, and perform a controlled channel test before acceptance. Store the spare in suitable ESD packaging with its inspection and test results attached.
OFFICIAL MANUFACTURER DOCUMENTS
Use the model-specific Moore Automation manual with the GE Fanuc ALG262G hardware reference. Match the installed rack, input configuration and loop wiring before replacement.
Two-page model-specific manual covering exact configuration, product reference data, application guidance and procurement checks.
OPEN PRODUCT MANUAL →MANUFACTURER REFERENCEManufacturer-authored ALG262G specifications from GFK-1999H, pages 3–8.
OPEN GE FANUC REFERENCE →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, connections, housing and nameplate details, packaging and visible condition. Verify that the supplied unit carries the exact IC200ALG262G part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786MODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Manufacturer | GE Fanuc |
| Product family | VersaMax |
| Product type | Analog Current Input Module |
| Catalog number | IC200ALG262G |
| Input module | 8 current-input channels |
| User input configuration memory | 4–20 mA default; 0–20 mA via jumper |
| Host CPU or NIU | Compatible VersaMax CPU or NIU |
| Backplane demand | 200 mA maximum at 5 VDC |
| Built-in serial connection | 4–20 mA default; 0–20 mA via jumper |
| Operating temperature | Refer to GFK-1999H operating limits |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, connections, housing and nameplate details, packaging and visible condition. Verify that the supplied unit carries the exact IC200ALG262G part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786WHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, nameplate images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
CUSTOMER VOICES
Bought an ABB panel view from Moore last month but the signal light wouldn't turn on at first... They jumped on a video call with us immediately to guide us through troubleshooting. We talked through it a lot, but we finally got it fixed. Really fast and helpful after-sales support.
It was a very nice and good experience working with Moore. Specially with sales manager Sandy is very polite, skillful and knows everything about the product. Prices are very competitive, have big inventory of products with prompt lead time. Would like to work for a very long time.
Tel : +8618020776786
Whatsapp & Wechat : +8618020776786
Email : [email protected]
1 Year Warranty
