IC200ALG326 is a GE Fanuc VersaMax analog current output module with a 4–20 mA default range and eight current-output channels. Check the baseplate, power budget and loop wiring and scaling before replacement.
Item NO.:
IC200ALG326Order(MOQ):
1Product Origin:
USALead Time：
2 daysBrand/ Manufacturer:
GE FanucDimensions:
Confirm with supplied unitWeight:
Confirm with supplied unitCountry of Origin: :
USADescription:
IC200ALG326 | Analog Current Output ModuleVERIFIED PRODUCT CONFIGURATION
IC200ALG326 is a VersaMax analog current output module for the GE Fanuc VersaMax platform. Match the saved project, host CPU or NIU and loop wiring hardware before replacement.
CONFIGURATION AT A GLANCE
System Configuration
Confirm the carrier power budget, preserve the saved analog output configuration and verify every connected field load.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the complete part number, required quantity, destination and installed configuration for quotation and availability checking.
PRODUCT OVERVIEW
IC200ALG326 is a GE Fanuc VersaMax analog current output module for legacy PLC installations that need multiple loop outputs from a compatible VersaMax host. The manufacturer reference describes an eight-channel current-output arrangement with configurable analog values used by the control system for connected field devices, so the module should be matched with the installed carrier or NIU, power budget, channel range, signal common and field wiring. Before replacing an existing unit, compare the complete IC200ALG326 marking and revision with the saved I/O configuration, confirm the required 4–20 mA loop connections and scaling, and check the host firmware and wiring details before energizing the system.
Manufacturer documentation: GE Fanuc GFK-1999H provides the VersaMax analog output specifications. This historical manual does not establish current production or lifecycle status.
Important: Match IC200ALG326, host CPU or NIU, power supply and loop wiring modules to the saved I/O configuration before ordering.
No. Calculate the VersaMax backplane load, confirm the carrier position and compare the complete catalog and revision markings before installation.
Confirm the configured output range for every channel and make the PLC configuration, scaling and connected load requirements agree before energizing.
Place the process in a safe state, isolate field power, label each circuit and verify polarity and return paths before moving conductors.
Compare the loop supply, total wiring resistance and connected device burden with the manufacturer limits, then test the full commanded span.
Save the PLC project, hardware configuration, channel scaling, alarm settings and the as-found terminal record.
Command controlled low, mid-scale and high values on each used channel and compare measured current and final-element response with the approved loop sheet.
Request clear photographs of the full catalog code, revision, date or lot markings and connector area, then compare them with the installed asset record.
Record traceability and condition, complete a controlled functional test, protect connectors and keep the module in suitable ESD packaging.
OFFICIAL MANUFACTURER DOCUMENTS
Use the model-specific Moore Automation manual with the GE Fanuc IC200ALG326 hardware reference. Match the installed rack, input configuration and loop wiring before replacement.
Two-page model-specific manual covering exact configuration, product reference data, application guidance and procurement checks.
OPEN PRODUCT MANUAL →MANUFACTURER REFERENCEManufacturer-authored IC200ALG326 specifications from GFK-1999H, pages 3–8.
OPEN GE FANUC REFERENCE →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, connections, housing and nameplate details, packaging and visible condition. Verify that the supplied unit carries the exact IC200ALG326 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786MODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Manufacturer | GE Fanuc |
| Product family | VersaMax |
| Product type | Analog Current Output Module |
| Catalog number | IC200ALG326 |
| Output channels | 8 current-output channels |
| Output range selection | 4–20 mA default; 0–20 mA via jumper |
| Host CPU or NIU | Compatible VersaMax Analog Output or NIU |
| Backplane demand | 200 mA maximum at 5 VDC |
| Built-in serial connection | 4–20 mA default; 0–20 mA via jumper |
| Operating temperature | Refer to GFK-1999H operating limits |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, connections, housing and nameplate details, packaging and visible condition. Verify that the supplied unit carries the exact IC200ALG326 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786WHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, nameplate images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
CUSTOMER VOICES
Bought an ABB panel view from Moore last month but the signal light wouldn't turn on at first... They jumped on a video call with us immediately to guide us through troubleshooting. We talked through it a lot, but we finally got it fixed. Really fast and helpful after-sales support.
It was a very nice and good experience working with Moore. Specially with sales manager Sandy is very polite, skillful and knows everything about the product. Prices are very competitive, have big inventory of products with prompt lead time. Would like to work for a very long time.
Tel : +8618020776786
Whatsapp & Wechat : +8618020776786
Email : [email protected]
1 Year Warranty
