IC200CBL230B is a GE Fanuc VersaMax non-shielded I/O cable with one connector and a documented length of 3.0 m. Match the connector-style carrier, interposing-terminal hardware and conductor assignments before replacement.
Item NO.:
IC200CBL230BOrder(MOQ):
1Product Origin:
USALead Time：
2 daysBrand/ Manufacturer:
GE FanucDimensions:
Not stated in the cited manufacturer documentationWeight:
Not stated in the cited manufacturer documentationCountry of Origin: :
USADescription:
IC200CBL230B | VersaMax I/O CableVERIFIED PRODUCT CONFIGURATION
IC200CBL230B is a VersaMax non-shielded I/O cable with one connector and a documented length of 3.0 m. Match the connector-style carrier and interposing-terminal hardware before replacement.
CONFIGURATION AT A GLANCE
SYSTEM CONFIGURATION
The GE Fanuc manual identifies IC200CBL230B as the one-connector 3.0 m non-shielded cable used with IC200CHS003 and applicable interposing terminals.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the complete part number, required quantity, destination and installed carrier/terminal details.
PRODUCT OVERVIEW
IC200CBL230B is a GE Fanuc VersaMax one-connector, 3.0 m non-shielded I/O cable intended for connector-style carrier and interposing-terminal installations. The GFK-1504 reference associates this cable configuration with the IC200CHS003 carrier and applicable IC200CHS011, IC200CHS012 or IC200CHS015 interposing terminals, with the revision-B color-coded conductors used to identify the required connections. Before replacement, compare the complete cable marking with the installed carrier, terminal hardware and conductor assignments, then confirm the connector condition, routing and field wiring so the replacement matches the existing VersaMax configuration.
Manufacturer documentation: GE Fanuc GFK-1504 documents the IC200CBL230 cable configuration and terminal assignments. The historical manual does not establish current lifecycle status.
Important: Match suffix B, carrier, interposing terminals and every conductor assignment before ordering.
Compare the complete suffix, wire-marking scheme, connector type and terminal table first. Revision B belongs to the color-coded conductor group, so do not substitute a later number-text-coded cable without reconciling every conductor.
Use it where the installed design calls for the IC200CHS003 connector-style I/O carrier and an applicable IC200CHS011, IC200CHS012 or IC200CHS015 interposing terminal. Confirm the exact terminal model before ordering.
Remove power, inspect the connector latch and pins, confirm orientation, and verify that the carrier connector is undamaged. Seat the connector fully and confirm the latch engagement before field-circuit testing.
Keep the documented length intact, avoid sharp bends and mechanical strain, and review separation from noise sources because the cable is non-shielded. Preserve the installed grounding and cabinet wiring plan.
Use the GFK-1504 color-coded-wire table for IC200CBL230C and earlier. Label both ends during removal and compare each color and stripe combination with its terminal position before reconnection.
With field power controlled, perform point-to-point continuity and absence-of-short tests for every used conductor. Then energize in stages and verify each I/O point against the approved drawings and PLC diagnostics.
Provide the full suffix B, quantity, required 3.0 m length, installed IC200CHS003 carrier, interposing-terminal model and destination. Request current photos of the cable marking, connector and conductor labels.
Record the cable and revision marking, connector condition, conductor labels and continuity results. Cap or protect the connector, avoid tight coils, and retain the inspection record with the spare for traceable pre-installation checks.
OFFICIAL MANUFACTURER DOCUMENTS
Use the model-specific Moore Automation manual with the GE Fanuc VersaMax I/O reference. Match the cable marking, carrier and terminal assignments before replacement.
Two-page model-specific manual covering cable configuration, application guidance and procurement checks.
OPEN PRODUCT MANUAL →MANUFACTURER REFERENCEManufacturer-controlled VersaMax product-family documentation.
OPEN EMERSON REFERENCE →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current photos of the complete cable marking, connector, conductor labels, packaging and visible condition. Verify that the supplied unit carries the exact IC200CBL230B part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786MODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Manufacturer | GE Fanuc |
| Product family | VersaMax |
| Product type | I/O Non-Shielded Cable |
| Catalog number | IC200CBL230B |
| Connector count | 1 connector |
| Cable length | 3.0 m |
| Documented carrier | IC200CHS003 connector-style I/O carrier |
| Applicable terminals | IC200CHS011, IC200CHS012 or IC200CHS015 |
| Revision-B wire marking | Color-coded conductor scheme |
| Country of origin | USA |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current photos of the complete cable marking, connector, conductors, packaging and visible condition. Verify that the supplied unit carries the exact IC200CBL230B part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786WHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, cable-label images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
CUSTOMER VOICES
Bought an ABB panel view from Moore last month but the signal light wouldn't turn on at first... They jumped on a video call with us immediately to guide us through troubleshooting. We talked through it a lot, but we finally got it fixed. Really fast and helpful after-sales support.
It was a very nice and good experience working with Moore. Specially with sales manager Sandy is very polite, skillful and knows everything about the product. Prices are very competitive, have big inventory of products with prompt lead time. Would like to work for a very long time.
Tel : +8618020776786
Whatsapp & Wechat : +8618020776786
Email : [email protected]
1 Year Warranty
