IC695HSC304 is a GE Fanuc PACSystems RX3i high-speed counter module with four internal counters, eight inputs and seven outputs. It supports pulse processing up to 1.5 MHz; verify the RX3i rack, firmware and field wiring before commissioning.
Item NO.:
IC695HSC304Order(MOQ):
1Product Origin:
Confirm with supplied unitLead Time：
2 daysBrand/ Manufacturer:
GE FanucDimensions:
Not stated in the cited manufacturer documentationWeight:
Not stated in the cited manufacturer documentationCountry of Origin: :
Confirm with supplied unitDescription:
IC695HSC304 | PACSystems RX3i High-Speed Counter ModuleVERIFIED PRODUCT CONFIGURATION
IC695HSC304 is a PACSystems RX3i high-speed counter module with four internal counters, eight high-speed inputs and seven high-speed outputs for direct processing of pulse signals up to 1.5 MHz. Confirm the RX3i universal backplane, CPU firmware, Machine Edition version, counter configuration, field wiring and output loading before commissioning.
CONFIGURATION AT A GLANCE
SYSTEM CONFIGURATION
Emerson GFK-2441A documents IC695HSC304 as a four-counter RX3i module with 8 external inputs, 7 external outputs and configurable counter types for high-speed pulse processing.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the exact model, quantity, rack and slot context, CPU firmware, Machine Edition version and application signal details.
PRODUCT OVERVIEW
IC695HSC304 is the four-counter version of Emerson’s PACSystems RX3i high-speed counter module. It accepts eight high-speed inputs and provides seven outputs for pulse signals up to 1.5 MHz; counters can be configured as Type A, B, C, D, E, Z or User-Defined. The module installs in an RX3i Universal Backplane and requires CPU firmware 3.81 or later and Machine Edition 5.50 with Service Pack 2 SIM 3 or later.
Manufacturer documentation: Emerson GFK-2441A documents the PACSystems RX3i high-speed counter modules IC695HSC304 and IC695HSC308, including specifications, installation, wiring and operation. The manual does not establish a current lifecycle status for this exact unit.
Important: Confirm the exact IC695HSC304 marking, RX3i universal backplane, CPU firmware, Machine Edition version, field wiring and output-load limits before ordering.
Install IC695HSC304 in an RX3i universal backplane with a CPU using firmware 3.81 or later and Machine Edition 5.50 with Service Pack 2 SIM 3 or later, then verify the project configuration before enabling the module.
The official manual identifies turbine flowmetering, meter proving, velocity measurement, material handling, motion control and process control as suitable application contexts. Match the counter type and signal arrangement to the installed encoder or pulse source.
Use the IC695HSC304 field-wiring table, confirm the two isolated input groups and two isolated output groups, check polarity and commons, and validate each used point against the approved schematic before applying field power.
Select the documented Type A, B, C, D, E, Z or User-Defined counter type according to the signal and homing requirement; record the count range, input filtering, preload and strobe behavior, and confirm the applicable maximum rate before startup.
Document the selected transition, counter-status and output-fault interrupt assignments, confirm the CPU interrupt logic, and test each setpoint output under controlled conditions before releasing the machine.
Record the complete IC695HSC304 nameplate, hardware revision, terminal assembly condition and packaging traceability; compare the 4-counter, 8-input, 7-output configuration with the purchase record before accepting the spare.
Provide the exact model, rack and slot context, CPU firmware, Machine Edition version, counter configuration, field-voltage arrangement and required quantity; plan a backup, controlled rollback and staged I/O validation because accumulated counts are lost when the module is removed or power-cycled.
Store the module in its protective packaging with model and revision traceability, inspect the terminal interface and enclosure before use, and perform a controlled rack-level configuration and point test before returning the spare to critical-service stock.
OFFICIAL MANUFACTURER DOCUMENTS
Use the model-specific Moore Automation manual with the Emerson PACSystems RX3i high-speed counter modules reference. Match the module marking, carrier and terminal assignments before replacement.
Independent product manual prepared for IC695HSC304 ordering and configuration review.
OPEN IC695HSC304 PDF → MANUFACTURER REFERENCEManufacturer-controlled PACSystems RX3i high-speed counter documentation.
OPEN EMERSON REFERENCE →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current photos of the complete module marking, terminal assembly and installation, packaging and visible condition. Verify that the supplied unit carries the exact IC695HSC304 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786MODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Manufacturer | GE Fanuc |
| Product family | PACSystems RX3i |
| Product type | High-Speed Counter Module |
| Catalog number | IC695HSC304 |
| Counter channels | 4 internal counters |
| High-speed inputs | 8 inputs |
| High-speed outputs | 7 outputs |
| Maximum count rate | 1.5 MHz |
| Counter modes | Type A, B, C, D, E, Z and User-Defined |
| Official reference | Emerson GFK-2441A |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current photos of the complete module marking, terminal assembly, I/O wiring, packaging and visible condition. Verify that the supplied unit carries the exact IC695HSC304 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786WHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, module nameplate images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
CUSTOMER VOICES
Bought an ABB panel view from Moore last month but the signal light wouldn't turn on at first... They jumped on a video call with us immediately to guide us through troubleshooting. We talked through it a lot, but we finally got it fixed. Really fast and helpful after-sales support.
It was a very nice and good experience working with Moore. Specially with sales manager Sandy is very polite, skillful and knows everything about the product. Prices are very competitive, have big inventory of products with prompt lead time. Would like to work for a very long time.
Tel : +8618020776786
Whatsapp & Wechat : +8618020776786
Email : [email protected]
1 Year Warranty
