IC697BEM761 is a GE Fanuc Series 90-70 interface that connects IC697 I/O racks to an IC600 PLC I/O bus. Confirm host register capacity, rack addressing and cable-chain arrangement before replacement.
Item NO.:
IC697BEM761Order(MOQ):
1Product Origin:
USALead Time：
2 daysBrand/ Manufacturer:
GE FanucDimensions:
Not stated in the cited hardware specificationsWeight:
Not stated in the cited hardware specificationsCountry of Origin: :
USADescription:
IC697BEM761 | IC600 I/O Interface ModuleVERIFIED PRODUCT CONFIGURATION
IC697BEM761 is an IC600 I/O interface for the GE Fanuc Series 90-70 platform. Match the IC600 host and rack role, device order and application data map before replacement.
CONFIGURATION AT A GLANCE
System Configuration
Record the rack-number jumpers, cable chain and mapped I/O references; reserve the documented control and status registers in the IC600 host.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the complete part number, required quantity, destination and installed configuration for quotation and availability checking.
PRODUCT OVERVIEW
IC697BEM761 is a GE Fanuc Series 90-70 interface module used to connect compatible IC697 I/O racks to an IC600 PLC I/O bus. The GFK-0096F reference describes the rack interface arrangement, including the IC600 host register requirement, rack addressing and the bus cable chain used between the connected racks. Before replacing the module, confirm that the control system still uses an IC600 host, verify the available register capacity and mapped I/O references, check the physical rack sequence and cable termination points, and compare the exact BEM761 marking with the installed rack configuration before energizing the system.
Manufacturer documentation: GE Fanuc GFK-0096F documents the BEM761 IC600 I/O interface. This historical manual does not establish current production or lifecycle status.
Important: Match IC697BEM761, the host CPU, rack interface role and rack I/O reference schedule before ordering.
No. It interfaces IC697 I/O racks to an IC600 PLC I/O bus. Confirm that the project actually retains an IC600 controller and the required I/O chain; do not purchase it as a standalone IC697 processor.
The manual requires at least 8K registers in the IC600 PLC. Check the host configuration and the reserved control/status registers before installation, including any application use that could conflict with the interface.
Not automatically. References are rack-dependent and slot-dependent. Compare the installed rack number and slot with the manual mapping table before moving modules or reconnecting field wiring.
The manual describes complementary input/output rack arrangements that extend capacity beyond the standard configuration. Corresponding slots must obey the complementary rules; treat this as a validated configuration design.
Record whether the rack is at the end of the I/O chain. Preserve the documented termination-resistor position and check the upstream and downstream cable orientation.
The manual associates a RACK-only fault with another module in the same rack rather than automatically condemning the interface. Compare all three LEDs and isolate power before removing hardware.
The interface reserves I/O references and registers by rack, while the IC600 also reserves references for system functions. Retain an approved address schedule so expansion does not overwrite control or status data.
Provide the host PLC details, five- or nine-slot rack type, rack-number jumper setting, cable-chain position and current I/O map. Request the exact BEM761 identity and a downstream communication test.
OFFICIAL MANUFACTURER DOCUMENTS
Use the model-specific Moore Automation manual with GE Fanuc GFK-0096F. Match the link architecture, data allocation and termination resistors before replacement.
Two-page model-specific manual covering exact configuration, product reference data, application guidance and procurement checks.
OPEN PRODUCT MANUAL →MANUFACTURER REFERENCEManufacturer-authored IC600 I/O bus specifications, GFK-0096F, reproduced in section 66 of GFK-0600F.
OPEN GE FANUC REFERENCE →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, connections, housing and nameplate details, packaging and visible condition. Verify that the supplied unit carries the exact IC697BEM761 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786MODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Manufacturer | GE Fanuc |
| Product family | Series 90-70 |
| Product type | IC600 I/O Interface Module |
| Catalog number | IC697BEM761 |
| Link role | IC600 host interface |
| Standard rack capacity | Up to 8 IC697 racks; Connects IC697 racks to an IC600 I/O bus |
| Host register requirement | IC600 host requires at least 8K registers |
| Backplane demand | 1.3 A at 5 V |
| Copper span | Verify IC600 I/O bus cable chain |
| Chain termination | Preserve end-rack termination |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, connections, housing and nameplate details, packaging and visible condition. Verify that the supplied unit carries the exact IC697BEM761 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786WHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, nameplate images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
CUSTOMER VOICES
Bought an ABB panel view from Moore last month but the signal light wouldn't turn on at first... They jumped on a video call with us immediately to guide us through troubleshooting. We talked through it a lot, but we finally got it fixed. Really fast and helpful after-sales support.
It was a very nice and good experience working with Moore. Specially with sales manager Sandy is very polite, skillful and knows everything about the product. Prices are very competitive, have big inventory of products with prompt lead time. Would like to work for a very long time.
Tel : +8618020776786
Whatsapp & Wechat : +8618020776786
Email : [email protected]
1 Year Warranty
