IC697BEM763 is a GE Fanuc Series 90-70 DLAN/DLAN+ interface module for PLC network communications. Confirm the rack slot, network role, firmware and cable arrangement before replacement.
Item NO.:
IC697BEM763Order(MOQ):
1Product Origin:
USALead Time：
2 daysBrand/ Manufacturer:
GE FanucDimensions:
Not stated in the cited hardware specificationsWeight:
Not stated in the cited hardware specificationsCountry of Origin: :
USADescription:
IC697BEM763 | GE FANUC DLAN / DLAN+VERIFIED PRODUCT CONFIGURATION
IC697BEM763 is a GE Fanuc Series 90-70 DLAN/DLAN+ interface module for PLC network communications. Confirm the rack slot, network role, firmware and cable arrangement before replacement.
CONFIGURATION AT A GLANCE
System Configuration
Record the installed network nodes, firmware and cable route before changing the interface.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the complete part number, required quantity, destination and installed configuration for quotation and availability checking.
PRODUCT OVERVIEW
IC697BEM763 is a GE Fanuc Series 90-70 DLAN/DLAN+ interface module used to connect a PLC system to the applicable DLAN network. The GFK-0729 reference covers the interface role, rack installation and network communication requirements, so the replacement must match the CPU, firmware, slot assignment and configured network parameters. Before energizing the rack, verify the exact module revision, network cabling, node or station settings and the saved application configuration.
Manufacturer documentation: GE Fanuc GFK-0645C documents the BEM721 I/O Link interface. This historical manual does not establish current production or lifecycle status.
Important: Match IC697BEM763, the host CPU, link role and slave data schedule before ordering.
Determine which device controls the existing link. BEM721 can serve either role, but the application logic, port use and data allocation must match that role. Record the CNC or PLC master and every connected slave before selecting the configuration.
No. The master can exchange up to 1024 inputs and 1024 outputs across up to 16 slaves. A BEM721 acting as a slave is limited to 64 inputs and 64 outputs. Confirm the required map before planning a role change.
The datasheet limits the copper distance between individual devices to 10 metres. Approved optical adapters and fibre can extend an individual span to 100 metres. Check each span, adapter and cable type rather than applying the fibre limit to ordinary copper wiring.
In master mode RESET restarts the module and link operation; the application program must re-initialize the link. Include this recovery sequence in the machine procedure and test it under controlled conditions before relying on it during a fault.
The devices must appear in the order expected by the master application. Label the cables and compare the physical sequence with the program block’s slave data lengths and I/O addresses to prevent data being associated with the wrong machine.
The permitted count depends on the CPU. The datasheet gives examples of four for CPU781, two for CPU771 and one for CPU731. Identify the actual CPU and confirm its documented limit before adding modules.
Allow the documented additional 0.2 A per optical adapter on top of the module’s 1.0 A demand from the 5 V bus. Keep the adapter cable separate from direct device-to-device cables; the manual warns against using the powered adapter cable directly between I/O Link devices.
Record the exact BEM721 label, master/slave role, cable connectors and the available application software or project blocks. Test Module OK, Link Active and Link Cfg indications together with actual I/O exchange, not only a power-on check.
OFFICIAL MANUFACTURER DOCUMENTS
Use the model-specific Moore Automation manual with GE Fanuc GFK-0645C. Match the link architecture, data allocation and optical adapters before replacement.
Two-page model-specific manual covering exact configuration, product reference data, application guidance and procurement checks.
OPEN PRODUCT MANUAL →MANUFACTURER REFERENCEManufacturer-authored I/O Link specifications, GFK-0645C, reproduced in section 66 of GFK-0600F.
OPEN GE FANUC REFERENCE →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, connections, housing and nameplate details, packaging and visible condition. Verify that the supplied unit carries the exact IC697BEM763 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786MODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Manufacturer | GE Fanuc |
| Product family | Series 90-70 |
| Product type | I/O Link Interface Module |
| Catalog number | IC697BEM763 |
| Link role | Master or slave |
| Master capacity | Up to 16 slaves; 1024 inputs and 1024 outputs |
| Slave capacity | 64 inputs and 64 outputs |
| Backplane demand | 1.0 A at 5 V, plus 0.2 A per optical adapter |
| Copper span | 10 m between individual devices |
| Optical span | Up to 100 m with approved adapters |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, connections, housing and nameplate details, packaging and visible condition. Verify that the supplied unit carries the exact IC697BEM763 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786WHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, nameplate images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
CUSTOMER VOICES
Bought an ABB panel view from Moore last month but the signal light wouldn't turn on at first... They jumped on a video call with us immediately to guide us through troubleshooting. We talked through it a lot, but we finally got it fixed. Really fast and helpful after-sales support.
It was a very nice and good experience working with Moore. Specially with sales manager Sandy is very polite, skillful and knows everything about the product. Prices are very competitive, have big inventory of products with prompt lead time. Would like to work for a very long time.
Tel : +8618020776786
Whatsapp & Wechat : +8618020776786
Email : [email protected]
1 Year Warranty
