IC697MDL650 is a GE Fanuc Series 90-70 32-point positive-logic input module arranged in four isolated groups of eight. Verify the rack slot, terminal groups, input filter setting and IC641 project before replacement.
Item NO.:
IC697MDL650Order(MOQ):
1Product Origin:
USALead Time：
2 daysBrand/ Manufacturer:
GE FanucDimensions:
Not stated in GFK-0080GWeight:
Not stated in GFK-0080GCountry of Origin: :
USADescription:
IC697MDL650 | Series 90-70 24 Volt DC Positive Logic Input ModuleVERIFIED PRODUCT CONFIGURATION
IC697MDL650 is a GE Fanuc Series 90-70 24 Volt DC positive-logic input module with 32 points arranged in four isolated groups of eight. Check the exact marking, rack wiring, terminal groups and input filter setting before replacement.
CONFIGURATION AT A GLANCE
SYSTEM CONFIGURATION
Record the rack slot, 24 VDC field wiring, terminal groups and IC641 project settings before changing the module.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the complete part number, quantity, destination and installed rack configuration for quotation and availability checking.
PRODUCT OVERVIEW
IC697MDL650 is a 24 volt DC positive-logic input module for the GE Fanuc Series 90-70 programmable controller family. The module provides 32 input points arranged as four isolated groups of eight, with LED indication for the ON-OFF status of each point on the PLC side. The GFK-0080G manual describes compatibility with pushbuttons, limit switches, selector switches and many two-wire or three-wire electronic proximity switches, while inputs may also be driven by a compatible IC697 positive-logic output module.
The input circuit typically draws 10 mA in the ON state and accepts up to 2 mA of OFF-state leakage without turning on. With an IC697 PLC and supported CPU options, the input filter can be configured for 1 ms or 10 ms on a module-wide basis. Input point A1 may be configured for a rising-edge or falling-edge CPU interrupt, and the interrupt response is independent of the selected filter time. The module uses mechanical keying to prevent substitution with the wrong module type.
Before replacement or commissioning, compare the exact IC697MDL650 marking with the rack and slot record, isolate power, document the four group commons and terminal wiring, confirm the configured filter and interrupt settings, and back up the IC641 programming project. Check the detachable terminal board, wire size, power input for each isolated group and the supplied unit nameplate before energizing the rack.
Manufacturer documentation: GE Fanuc GFK-0080G covers the 24 Volt DC positive-logic input module and its Series 90-70 installation data.
Important: Match IC697MDL650, the rack position, isolated input groups and configured filter setting before ordering.
The module provides 32 positive-logic input points. Confirm the nameplate and terminal grouping before wiring or replacement.
GFK-0080G describes four isolated groups of eight. Compare the field commons and terminal labels with the installed rack drawing.
Selectable 1 ms or 10 ms filtering is documented where supported. Record the configured value before removing the existing module.
The manufacturer reference identifies proximity-switch compatibility. Check sensor voltage, commons, polarity and the actual input wiring before commissioning.
Verify the Series 90-70 rack slot, supply arrangement and field wiring, then compare the exact IC697MDL650 marking with the project record.
Record the A, B, C and D input groups and their eight-point assignments so conductors return to the same isolated group.
Save the IC641 project and note the input reference addresses and filter configuration before changing the hardware.
Request a clear nameplate and terminal assembly photo, confirm the exact catalog number and inspect the supplied unit before energizing it.
OFFICIAL MANUFACTURER DOCUMENTS
Use the model-specific Moore Automation reference with GE Fanuc GFK-0080G. Match the module marking, rack slot, terminal groups and input filter setting before replacement.
Reference document covering the exact module identification, input grouping and procurement checks.
OPEN MODEL REFERENCE →MANUFACTURER REFERENCEManufacturer-authored Series 90-70 24 Volt DC positive-logic input specifications.
OPEN GE FANUC REFERENCE →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete nameplate, terminal assembly, connections, packaging and visible condition. Verify that the supplied unit carries the exact IC697MDL650 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786MODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Manufacturer | GE Fanuc |
| Product family | Series 90-70 |
| Product type | 24 Volt DC positive-logic input module |
| Catalog number | IC697MDL650 |
| Rated voltage | 24 volts DC |
| Inputs per module | 32 points in four isolated groups of eight |
| Isolation | 1500 V input-to-backplane; 500 V between input groups |
| Input voltage range | -3 to +30 volts DC |
| Input current | 10 mA typical at rated voltage |
| Input impedance | 2.4 kΩ typical |
| On-state voltage | 13 to 30 volts DC |
| On-state current | 5.5 to 15 mA |
| Off-state voltage | -3 to 5 volts DC |
| Filter delay | 1 ms or 10 ms configurable where supported |
| 5 V bus current | 0.30 A |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, terminal assembly, connections, packaging and visible condition. Verify that the supplied unit carries the exact IC697MDL650 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786WHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, nameplate images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
CUSTOMER VOICES
Bought an ABB panel view from Moore last month but the signal light wouldn't turn on at first... They jumped on a video call with us immediately to guide us through troubleshooting. We talked through it a lot, but we finally got it fixed. Really fast and helpful after-sales support.
It was a very nice and good experience working with Moore. Specially with sales manager Sandy is very polite, skillful and knows everything about the product. Prices are very competitive, have big inventory of products with prompt lead time. Would like to work for a very long time.
Tel : +8618020776786
Whatsapp & Wechat : +8618020776786
Email : [email protected]
1 Year Warranty
