IC697MDL752 is a Series 90-70 32-point output module used with GE Fanuc PLC I/O systems. Verify the output type, rack adapter, field commons and load wiring before replacement.
Item NO.:
IC697MDL752Order(MOQ):
1Product Origin:
USALead Time：
2 daysBrand/ Manufacturer:
GE FanucDimensions:
Not stated in GFK-0080GWeight:
Not stated in GFK-0080GCountry of Origin: :
USADescription:
IC697MDL752 | Series 90-70 32-Point Output ModuleVERIFIED PRODUCT CONFIGURATION
IC697MDL752 is a Series 90-70 32-point output module for the GE Fanuc Series 90-70 platform. Match the saved project, rack adapter and installed slot and field output wiring hardware before replacement.
CONFIGURATION AT A GLANCE
System Configuration
Verify the installed rack adapter and slot, confirm the rack power budget and preserve the output common and terminal arrangement.
OFFICIAL PRODUCT FEATURES
DIRECT SALES CONTACT
Send the complete part number, required quantity, destination and installed configuration for quotation and availability checking.
PRODUCT OVERVIEW
IC697MDL752 is a GE Fanuc Series 90-70 discrete output module with 32 positive-logic output points arranged in four isolated groups of eight. The GFK-2793E installation reference identifies it as a 12 Vdc, 0.5 A output module with high inrush capability for compatible field loads, and front LED indicators show the ON/OFF status of each point on the PLC side of the circuit. Before replacement or commissioning, compare the complete module marking with the Series 90-70 rack, installed slot, adapter or harness, backplane power budget and saved PLC configuration. Confirm the output voltage and current requirements, common-group arrangement, terminal assignments, polarity, return paths and connected loads against the cabinet drawings and the supplied unit. With power removed, inspect the field wiring and commons, then perform a controlled point-by-point test and verify the commanded states, load response, alarms and interlocks before returning the rack to service. For procurement, provide the exact catalog and revision markings, quantity, destination and nameplate photographs; do not assume interchangeability from the connector or module shape alone.
Manufacturer documentation: GE Fanuc GFK-2793E provides the Series 90-70 32-point output and adapter installation context. This historical manual does not establish current production or lifecycle status.
Important: Match IC697MDL752, rack adapter and installed slot, power supply and field output wiring modules to the saved output configuration before ordering.
First compare the complete catalog number, rack adapter and installed slot firmware, configured output type, commons and load assignments. Back up the existing hardware configuration before installing the replacement; do not assume revision interchangeability from the connector shape alone.
Use the module for discrete output control that match the documented documented output ratings and load configuration. Confirm each connected load, common and cabinet drawing before assigning a channel.
Record the output type and commons, confirm terminal assignments with power removed, and make the PLC configuration agree with the installed load wiring. Perform a controlled output test before returning the rack to service.
The module backplane supplies the module electronics; connected field loads must meet the applicable output rating and cabinet supply requirements. Check polarity, commons, return paths and load current before commissioning.
Review the common arrangement and return paths rather than assuming each point is individually isolated. Check cabinet grounding, shield termination and ground-potential differences, then correct any unwanted current path before connecting loads.
Test representative output points under controlled conditions. Compare commanded states, load response, alarms and interlocks with the approved drawings and saved PLC application.
Provide the exact catalog and revision markings, quantity, rack adapter and installed slot, output type, common assignments and terminal details and destination. Ask for current nameplate photographs so purchasing can match the offered unit to the installed asset record.
Photograph the label and connector area, record condition and traceability, confirm the output type and commons, and perform a controlled point test before acceptance. Store the spare in suitable ESD packaging with its inspection and test results attached.
OFFICIAL MANUFACTURER DOCUMENTS
Use the model-specific Moore Automation manual with the GE Fanuc MDL752 hardware reference. Match the installed rack, output configuration and field output wiring before replacement.
Two-page model-specific manual covering exact configuration, product reference data, application guidance and procurement checks.
OPEN PRODUCT MANUAL →MANUFACTURER REFERENCEManufacturer-authored MDL752 specifications from GFK-2793E.
OPEN GE FANUC REFERENCE →SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, connections, housing and nameplate details, packaging and visible condition. Verify that the supplied unit carries the exact IC697MDL752 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786MODEL IDENTIFICATION
| Specification | Official identification / verification note |
|---|---|
| Manufacturer | GE Fanuc |
| Product family | Series 90-70 |
| Product type | 32-Point Output Module |
| Catalog number | IC697MDL752 |
| Output module | 32 discrete output points |
| Output configuration | 32 discrete output points; verify output type and common wiring |
| Rack adapter | Series 90-70 rack and adapter |
| Rack power demand | Verify rack power budget from installed system |
| Field commons | 32 discrete output points; verify output type and common wiring |
| Operating temperature | Refer to GFK-2793E operating limits |
SEE THE ACTUAL PRODUCT BEFORE YOU BUY
Ask for current product photos, the complete installed nameplate, connections, housing and nameplate details, packaging and visible condition. Verify that the supplied unit carries the exact IC697MDL752 part number.
EMAIL : [email protected]WHATSAPP/WECHAT : +86-18020776786WHY BUY FROM MOORE AUTOMATION
Quick Quote
Fast response to complete part-number enquiries.
Global Delivery
Worldwide shipping options for industrial automation components.
Actual Product Verification
Current photos, nameplate images or inspection videos where available.
Technical Support
Support with product identification and installed-configuration verification.
CUSTOMER VOICES
The exact IC697MDL752 marking and Series 90-70 rack context made it easier to verify the output module before replacement. The team helped us check the slot, commons and connected loads.
The procurement notes made it easier to confirm the 32-point output arrangement, terminal wiring and delivery details before ordering a replacement.
Tel : +8618020776786
Whatsapp & Wechat : +8618020776786
Email : [email protected]
1 Year Warranty
