The Moore Automation team was responsive, professional, and easy to work with. Every step of the quotation and ordering process was communicated clearly.
Part number PM5012-R-ETH corresponds to ABB product ID 1SAP122700R0072. Compact processor module with 1 MB memory, six 24 V DC digital inputs, four relay outputs, one Ethernet interface and one option-board slot.
Item NO.:
PM5012-R-ETHBrand/ Manufacturer:
ABBDimensions:
AC500-eCo V3 Relay CPUWeight:
1SAP122700R0072Country of Origin: :
MEMORY: 1 MB; ONBOARD I/O: 6 DI · 4 relay DO; NETWORK: 1 × Ethernet; OPTION SLOTS: 1Description:
Verified model-specific data for PM5012-R-ETHEngineering note: Use the documented 24 V DC supply and verify both relay-output common groups before connecting field loads. Confirm RUN status, Ethernet parameters, all six input states and each relay channel under its actual load.
PM5012-R-ETH is the processor module identified by ABB product ID 1SAP122700R0072. Compact processor module with 1 MB memory, six 24 V DC digital inputs, four relay outputs, one Ethernet interface and one option-board slot.
Match both the model PM5012-R-ETH and ABB product ID 1SAP122700R0072. A similar family name is not sufficient for replacement approval.
Match the exact AC500-eCo V3 hardware revision, option board, terminal-block set, firmware and engineering project.
Use the documented 24 V DC supply and verify both relay-output common groups before connecting field loads.
Do not assume live insertion is permitted. Isolate energy and follow the applicable ABB installation procedure and site lockout process; any supported hot-swap operation requires the exact approved terminal hardware and conditions.
Record the complete nameplate, product ID, device index, firmware, terminal/base type, field wiring, network settings, diagnostic state and a verified project backup.
Confirm RUN status, Ethernet parameters, all six input states and each relay channel under its actual load.
Start with supply and status indications, then compare the physical wiring and module position with the configured hardware. Continue with channel or network diagnostics without changing several variables at once.
Verified applications include compact machine sequencing, relay-switched pumps and contactors, small utility skids, ethernet-connected panel retrofits. Final suitability depends on electrical ratings, environmental limits and the complete system design.
Send PM5012-R-ETH, product ID 1SAP122700R0072, quantity, destination, installed CPU or bus master, terminal/base type, firmware, signal or protocol requirements and clear nameplate and wiring photos.
Send the full model, ABB product ID, required quantity and destination before ordering.
The ABB PM5012-R-ETH is identified by product ID 1SAP122700R0072. Compact processor module with 1 MB memory, six 24 V DC digital inputs, four relay outputs, one Ethernet interface and one option-board slot.
Compatibility must be checked from the complete product identity, installed terminal/base, wiring, device index, firmware and engineering project.
The exact lifecycle and regional orderability of PM5012-R-ETH must be confirmed for the requested quantity and destination. The article identity on this page is based on ABB product record 1SAP122700R0072.
Technical content is based on the exact ABB product record and the applicable ABB hardware documentation. This module does not send visitors to a third-party website.
Exact article identification and manufacturer product characteristics.
Use the document edition applicable to the supplied device index and firmware.
Ask for the complete nameplate, product ID, terminals, packaging and current product condition. Verify that the supplied unit carries the exact PM5012-R-ETH and 1SAP122700R0072 identity.
REQUEST PHOTO / VIDEO| Specification | Official identification / verification note |
|---|---|
| Displayed model | PM5012-R-ETH — exact article identity |
| ABB product ID | 1SAP122700R0072 |
| Product family | AC500-eCo V3 |
| Product ID | 1SAP122700R0072 |
| Module type | Processor module |
| Memory | 1 MB |
| Digital inputs | 6 × 24 V DC |
| Digital outputs | 4 × relay |
| Network interface | Ethernet |
| Option-board slots | 1 |
| Controller family | AC500-eCo V3 |
Send the full PM5012-R-ETH model, ABB product ID 1SAP122700R0072, required quantity and delivery country. Our team can check availability and arrange nameplate photos or video verification where available.
Confirm the full model, available quantity, condition and estimated dispatch time.
Check the product ID, hardware index, terminals and visible product condition.
Receive quotation, warranty terms and international shipping support.
The Moore Automation team was responsive, professional, and easy to work with. Every step of the quotation and ordering process was communicated clearly.
Tiffany provided patient and thoughtful support throughout the inquiry. Her prompt follow-up and clear answers made the purchasing process smooth and reassuring.