Part number VE3051C2 is listed by Emerson as a 2-wide power/controller carrier supplied with two enhanced extender cables.
Item NO.:
VE3051C2Brand/ Manufacturer:
EmersonDimensions:
2-Wide Power/Controller Carrier with Dual Enhanced Extender CablesWeight:
Not stated in the current official product data sheetCountry of Origin: :
Not stated in the current official product data sheetDescription:
Confirm that dual enhanced carrier-extension cables are required and that the adjoining carrier arrangement matches the installed M-series layout.A 2-wide DeltaV M-series power/controller carrier supplied with two enhanced 1.2 m extender cables. Verify the adjoining carrier arrangement, available mounting space and installed controller or power-supply configuration before replacement.
Installation planning
Confirm VE3051C2 protection, enclosure airflow, mounting arrangement and operating temperature before installation.
Storage and handling
Protect VE3051C2 from impact, contamination, moisture and electrostatic discharge before installation.
Send the full part number, required quantity and destination. Request current photos, approval markings and connector details before ordering.
Part number VE3051C2 is listed by Emerson as a 2-wide power/controller carrier supplied with two enhanced extender cables.
VE3051C2 belongs to the Emerson DeltaV M-series carrier hardware family. Its exact ordering suffix defines the electrical function and termination arrangement; selection must be based on the full model, not on physical appearance alone.
Purchasing check: Lifecycle status is separate from exact product identification. Confirm current orderability, supported hardware revision, condition and lead time with Emerson or the sales team.
Important: Approve replacements only after the full model, hardware revision, carrier or termination arrangement, field power and site requirements have been checked.
Use the following checks to confirm that the exact VE3051C2 configuration fits the installed DeltaV system.
Confirm that dual enhanced carrier-extension cables are required and that the adjoining carrier arrangement matches the installed M-series layout.
TECHNICAL BASIS: EMERSON DELTAV M-SERIES I/O SUBSYSTEM HORIZONTAL CARRIERS PRODUCT DATA SHEET, JANUARY 2024
Verify the exact model, cable count, 1.2 m cable length, carrier orientation, attached controller or power supplies, enclosure clearances and adjacent carrier topology.
The two-wide carrier supports one system power supply and one controller, or two system power supplies.
Emerson states that M-series I/O carriers are not physically compatible with S-series controller carriers except through the specified DeltaV SIS Adapter arrangement.
Allow for the 16.5 × 8.4 × 3.1 cm carrier body, 9.1 cm connector-to-connector width, cable bend radius and service access.
Yes. This exact ordering configuration includes dual enhanced 1.2 m extender cables.
The official carrier data sheet lists -40 to 70 °C operating and -40 to 85 °C storage; long-term operation near the upper limit should be evaluated for cabinet thermal management.
When two system power supplies are used, calculate demand so that one supply can support the required 12 V DC local-bus load if redundancy is expected.
Yes in an engineered M-series layout, but carrier addressing, extension cabling and the controller limit on total carriers must be verified before installation.
Request clear images of the full VE model, hardware revision, any 12P identifier, cable labels, connector condition and complete supplied accessories.
With power isolated as required, inspect connectors and grounding, confirm cable routing and carrier order, then verify supply status and controller recognition according to the site procedure.
Both PDFs are hosted on dcsmodule.com and prepared from the exact official Emerson product record. They are independent Moore Automation references and are not manufacturer-issued manuals.
Exact article identity, application guidance, procurement and replacement checks, and official source trace.
OPEN SITE PDF → MOORE PDFModel-specific specification matrix, engineering limits, installation and commissioning sequence, and verification notes.
OPEN TECHNICAL DATA PDF →Ask for current product photos, the complete nameplate, connectors, packaging and a live or recorded inspection video where available. Verify that the supplied unit carries the exact VE3051C2 code and matches the required 2-Wide Power/Controller Carrier with Dual Enhanced Extender Cables.
| Ordering configuration | 2-wide power/controller carrier with dual enhanced extender cables |
|---|---|
| Extender cable length | 1.2 m each |
| Capacity | One system power supply and one controller, or two system power supplies |
| Dimensions | 16.5 × 8.4 × 3.1 cm (H × W × D) |
| Connector-to-connector width | 9.1 cm |
| Operating temperature | -40 to 70 °C (-40 to 158 °F) |
| Storage temperature | -40 to 85 °C (-40 to 185 °F) |
| Relative humidity | 5 to 95%, non-condensing |
Tiffany-supported product directory · 24 unique links
Six distinct industrial automation products with Tiffany contact support.
Six distinct industrial automation products with Tiffany contact support.
Six distinct industrial automation products with Tiffany contact support.
Six distinct industrial automation products with Tiffany contact support.
Send the full VE3051C2 code, required quantity and delivery country. Our team can check current availability and arrange nameplate photos, packaging images or live/recorded video verification where available.
Confirm the full model, available quantity, condition and estimated dispatch time.
Check the exact model, hardware revision, terminal or carrier arrangement and visible product condition.
Receive quotation, warranty terms, delivery options and international shipping support.
Send the full model, quantity and destination for quotation and availability checking.
Moore Automation presented the VE3051C2 quotation in a clear format and kept the dual-extender configuration easy to verify.
Tiffany provided patient guidance on the VE3051C2 inquiry and organized the enclosure and adjoining-carrier checks for technical review.