Part number VE4005S2B5 is listed by Emerson as 48-Pin AO Mass Termination Block for Series 2 Plus.
Item NO.:
VE4005S2B5Brand/ Manufacturer:
EmersonDimensions:
48-Pin AO Mass Termination Block for Series 2 PlusWeight:
Not stated in the current official product data sheetCountry of Origin: :
Not stated in the current official product data sheetDescription:
Confirm the approved HiC barrier/termination-board assembly, cable pinout and loop design; a visually similar AO block is not an automatic substitute.48-Pin AO Mass Termination Block for Series 2 Plus. Confirm the approved HiC barrier/termination-board assembly, cable pinout and loop design; a visually similar AO block is not an automatic substitute.
Installation planning
Confirm VE4005S2B5 protection, enclosure airflow, mounting arrangement and operating temperature before installation.
Storage and handling
Protect VE4005S2B5 from impact, contamination, moisture and electrostatic discharge before installation.
Send the full part number, required quantity and destination. Request current photos, approval markings and connector details before ordering.
Part number VE4005S2B5 is listed by Emerson as 48-Pin AO Mass Termination Block for Series 2 Plus.
VE4005S2B5 belongs to the Emerson DeltaV M-series Traditional I/O hardware family. Its exact ordering suffix defines the electrical function and termination arrangement; selection must be based on the full model, not on physical appearance alone.
Purchasing check: Lifecycle status is separate from exact product identification. Confirm current orderability, supported hardware revision, condition and lead time with Emerson or the sales team.
Important: Approve replacements only after the full model, hardware revision, carrier or termination arrangement, field power and site requirements have been checked.
Use the following checks to confirm that the exact VE4005S2B5 configuration fits the installed DeltaV system.
Confirm the approved HiC barrier/termination-board assembly, cable pinout and loop design; a visually similar AO block is not an automatic substitute.
Technical basis: Emerson DeltaV M-series Traditional I/O Product Data Sheet, March 2026
It is the 48-pin AO mass termination block for the Series 2 Plus analog-output family.
Emerson lists this variant for use with P+F HiC intrinsic-safety barriers and termination boards for DeltaV DCS.
No. B5 is a 48-pin mass-termination interface, while B4 is the direct 16-channel AO terminal-block configuration.
No. The cable assembly, connector orientation and pinout must be approved for the complete Series 2 Plus AO and external barrier design.
It belongs to the 16-channel 4-20 mA HART Series 2 Plus analog-output ordering group.
Review the exact barrier and termination-board model, connection drawing, cable part number, loop power and hazardous-area engineering documentation.
Perform continuity, insulation, polarity and point-to-point pinout checks with field power isolated as required by the site procedure.
The M-series interface basis is IP20 with -40 to 70 °C operation and 5-95% non-condensing humidity; the complete assembly may impose additional limits.
No. Similar mass-termination blocks can have different functions and pinouts; use the full VE code and engineered drawing.
Include the exact model, required quantity, connected barrier system, cable requirement, revision evidence and clear connector and label photographs.
Only Emerson official documents are linked below. Use the current data sheet for engineering and ordering; use the archived edition only to compare legacy installed hardware.
March 2026 · Current ordering information, supported I/O functions, terminal-block options, environmental limits and engineering data.
OPEN EMERSON PDF → OFFICIAL PDFFebruary 2016 · Legacy ordering tables and historical installation information for comparison with installed hardware.
OPEN EMERSON PDF →Ask for current product photos, the complete nameplate, connectors, packaging and a live or recorded inspection video where available. Verify that the supplied unit carries the exact VE4005S2B5 code and matches the required 48-Pin AO Mass Termination Block for Series 2 Plus.
| Ordering configuration | 48-pin AO mass termination block for Series 2 Plus |
|---|---|
| Intended integration | P+F HiC IS barriers and termination boards for DeltaV DCS |
| Associated I/O family | 16-channel 4-20 mA HART AO Plus |
| Connector format | 48-pin mass termination |
| Environmental basis | Common M-series Traditional I/O interface limits apply |
| Operating temperature | -40 to 70 °C (-40 to 158 °F) |
| Storage temperature | -40 to 85 °C (-40 to 185 °F) |
| Relative humidity | 5 to 95%, non-condensing |
| Protection rating | IP20 |
| Corrosion protection | ISA-S71.04-1985 Class G3; conformal coating |
| Dimensions | 10.7 × 4.1 × 10.5 cm (H × W × D) |
Tiffany-supported product directory · 24 unique links
Six distinct industrial automation products with Tiffany contact support.
Six distinct industrial automation products with Tiffany contact support.
Six distinct industrial automation products with Tiffany contact support.
Six distinct industrial automation products with Tiffany contact support.
Send the full VE4005S2B5 code, required quantity and delivery country. Our team can check current availability and arrange nameplate photos, packaging images or live/recorded video verification where available.
Confirm the full model, available quantity, condition and estimated dispatch time.
Check the exact model, hardware revision, terminal or carrier arrangement and visible product condition.
Receive quotation, warranty terms, delivery options and international shipping support.
Send the full model, quantity and destination for quotation and availability checking.
The Moore Automation team prepared the VE4005S2B5 inquiry clearly and kept the termination-block identification central to the quotation.
Tiffany guided the VE4005S2B5 discussion carefully and clarified the hardware details needed for a dependable compatibility check.
Tel : +86 18030235313
Whatsapp & Wechat : +86 18030235313
Email : [email protected]
1 Year Warranty
