Part number VE4035S2B4 is listed by Emerson as Redundant 16-Channel AO Terminal Block for Series 2 Plus.
Item NO.:
VE4035S2B4Brand/ Manufacturer:
EmersonDimensions:
Redundant 16-Channel AO Terminal Block for Series 2 PlusWeight:
Not stated in the current official product data sheetCountry of Origin: :
Not stated in the current official product data sheetDescription:
Do not treat this as a simplex terminal block; verify the two-card redundant arrangement, keying, field wiring and current revision.Redundant 16-Channel AO Terminal Block for Series 2 Plus. Do not treat this as a simplex terminal block; verify the two-card redundant arrangement, keying, field wiring and current revision.
Installation planning
Confirm VE4035S2B4 protection, enclosure airflow, mounting arrangement and operating temperature before installation.
Storage and handling
Protect VE4035S2B4 from impact, contamination, moisture and electrostatic discharge before installation.
Send the full part number, required quantity and destination. Request current photos, approval markings and connector details before ordering.
Part number VE4035S2B4 is listed by Emerson as Redundant 16-Channel AO Terminal Block for Series 2 Plus.
VE4035S2B4 belongs to the Emerson DeltaV M-series Traditional I/O hardware family. Its exact ordering suffix defines the electrical function and termination arrangement; selection must be based on the full model, not on physical appearance alone.
Purchasing check: Lifecycle status is separate from exact product identification. Confirm current orderability, supported hardware revision, condition and lead time with Emerson or the sales team.
Important: Approve replacements only after the full model, hardware revision, carrier or termination arrangement, field power and site requirements have been checked.
Use the following checks to confirm that the exact VE4035S2B4 configuration fits the installed DeltaV system.
Do not treat this as a simplex terminal block; verify the two-card redundant arrangement, keying, field wiring and current revision.
Technical basis: Emerson DeltaV M-series Traditional I/O Product Data Sheet, March 2026
It is the redundant 16-channel AO terminal block for the Series 2 Plus 4-20 mA HART analog-output family.
No. It is a termination and redundancy component that must be used with the compatible Series 2 Plus AO card pair and carrier system.
The official ordering table identifies it as a 16-channel redundant AO terminal block.
Only through an engineered conversion that adds the correct redundant card arrangement and updates wiring and project configuration.
Check identical compatible card types and revisions, correct seating and keying, controller recognition and healthy active/standby diagnostics.
Follow the site test procedure to confirm active/standby recognition, output continuity and alarms without exposing the process to an unsafe transition.
Confirm every channel assignment, field-supply capacity, polarity, grounding, terminal torque and maintenance isolation path for the redundant assembly.
Use it within the documented M-series I/O limits, including IP20 protection, -40 to 70 °C operation and non-condensing humidity.
Request the full VE model, redundant terminal-block label, connector faces, keys, revision markings and any paired cards.
Record the exact model and revision, card pair, slot assignment, channel wiring, loop checks and completed redundancy test results.
Only Emerson official documents are linked below. Use the current data sheet for engineering and ordering; use the archived edition only to compare legacy installed hardware.
March 2026 · Current ordering information, supported I/O functions, terminal-block options, environmental limits and engineering data.
OPEN EMERSON PDF → OFFICIAL PDFFebruary 2016 · Legacy ordering tables and historical installation information for comparison with installed hardware.
OPEN EMERSON PDF →Ask for current product photos, the complete nameplate, connectors, packaging and a live or recorded inspection video where available. Verify that the supplied unit carries the exact VE4035S2B4 code and matches the required Redundant 16-Channel AO Terminal Block for Series 2 Plus.
| Ordering configuration | Redundant 16-channel AO terminal block for Series 2 Plus |
|---|---|
| Associated I/O family | 16-channel 4-20 mA HART AO Plus |
| Channel count | 16 |
| Redundancy mode | Two compatible Series 2 Plus AO cards on a redundant terminal block |
| Signal family | 4 to 20 mA HART |
| Environmental basis | Common M-series Traditional I/O interface limits apply |
| Operating temperature | -40 to 70 °C (-40 to 158 °F) |
| Storage temperature | -40 to 85 °C (-40 to 185 °F) |
| Relative humidity | 5 to 95%, non-condensing |
| Protection rating | IP20 |
| Corrosion protection | ISA-S71.04-1985 Class G3; conformal coating |
| Dimensions | 10.7 × 4.1 × 10.5 cm (H × W × D) |
Tiffany-supported product directory · 24 unique links
Six distinct industrial automation products with Tiffany contact support.
Six distinct industrial automation products with Tiffany contact support.
Six distinct industrial automation products with Tiffany contact support.
Six distinct industrial automation products with Tiffany contact support.
Send the full VE4035S2B4 code, required quantity and delivery country. Our team can check current availability and arrange nameplate photos, packaging images or live/recorded video verification where available.
Confirm the full model, available quantity, condition and estimated dispatch time.
Check the exact model, hardware revision, terminal or carrier arrangement and visible product condition.
Receive quotation, warranty terms, delivery options and international shipping support.
Send the full model, quantity and destination for quotation and availability checking.
Moore Automation handled the VE4035S2B4 request with an orderly quotation and clear communication about the exact terminal-block model.
Tiffany provided thoughtful support for the VE4035S2B4 inquiry and kept the redundant-configuration review points easy to follow.