1734-485ASC| |ASCII Interface module

Brand/ Manufacturer:
Dimensions:
7.6cm*7cm*10.8cm
Weight:
0.3kg
Country of Origin: :
United States
Description:
ASCII Interface module

Inquiry now

Mfr. Part Number:	1734-485ASC

Manufacturer:

Description:	The / Automation 1734-485ASC I/O module is a point I/O module. It has been designed and manufactured as part of the Point I/O 1734 series.

Full Description:	The 1734-485ASC point I/O module can connect to either the RS-422 industrial network or the RS-485 industrial network. This module is meant to be wired with shielded cables because shielded cables will significantly reduce the electrical noise in the system that would otherwise disrupt network signals.

plcsale@mooreplc.com + 86 18030235313 dddemi33 2851195473

The 1734-485ASC product is a Serial Interface Module. These ASCII modules have an impressionable DeviceNet interface to a variety of ASCII devices like RS-232, RS-485, and RS-422 ASCII. The product is mainly involved to provide the transmission connections to the ASCII device. The 1734-485ASC module connects to the RS-485 or RS-422 network.

The 1734-485ASC module has been optioned with a shielded cable to cut down the effects of electrical discord. Only one side of the shield is grounded. If both ends of the shield are grounded then a fault may occur as the grounded shield on both ends may form a loop. In this context, it is suggested that the shield should never be connected to the general side of the logic circuit. So generally, the shield is grounded directly to the chassis. However, the connection of the latter is not accessible for the product 1734-485ASC terminal removable block. The connection is made at the DIN Rail. The metal panel DIL Rail is mounted at the user’s Input-Output Interface.

The 1734-485ASC module comes with an RS-485 2-wire network or RS-422 4-wire network. The second end of the terminal cable is connected to the ASCII module using the appropriate places on the 1734-TB terminal block. It may be marked that the terminal has markings on the module case. The power may be switched on the device and the ASCII module. The ASCII module buffer sizes need to be set up.

The general notes are 20 and 20 bytes. Required parameters can be optionally setup in the configuration file as needed in the ASCII data if more than 20 bytes is required for receiving or transmitting of buffers. Also, the I/O message size can be modified as desired. For this reconfiguration to be done in the ASCII buffer size where the default value is located. The following procedure needs to be for sending data to the serial device connected. The data must at the initial stage be sent to the ASCII device.

It is the ASCII module that must further transmit the data to the serial device. Through the Input-Output message terminal, the ASCII module transmits a serial of characters from the DeviceNet master to the serial device. It is only under the strict procedure that the received character string may be transferred to the serial device. The Transmit Character Buffer Length i.e. the number of bytes defined is received or the defined End-of-String Terminator character is detected and active. When either of the conditions is fulfilled the ASCII module saves and stores the string of value in the DeviceNet string data internal buffer memory and remits the same as output to the serial port.

EPRO	ABB	Bently Nevada	SIEMENS
A6210	APOW-01C	330103-00-05-10-02-05	6ES7390-1AF30-0AA0
A6110	SDCS-POW-4	330103-00-18-05-02-05	6ES7953-8LJ31-0AA0
A6760	07AC91	33104-00-10-10-02-05	6GK7443-5DX05-0XE0
A6120	DSDI110AV1	330101-00-08-05-02-05	6ES7315-2EH14-0AB0
A6500-UM	TC560V23BSE022178R1	330130-085-00-05	6ES7952-1KL00-0AA0
A6740	CI854A	125388-01	6ES7322-1BL00-0AA0
A3120/022-000	CI522A3BSE018283R1	128275-01	6ES7972-0AA02-0XA0
A6312/06	DSTS1063BSE007287R1	330103-00-03-10-02-05	6ES7392-1AM00-0AA0
A6370D	DI880	330780-91-00	6ES7158-0AD01-0XA0
MMS6140	UNS0882A-P,V1	330103-00-14-10-01-00	6ES7331-7NF00-0AB0
MMS6312	SB822	330103-00-14-10-01-00	6ES7307-1EA00-0AA0
MMS6210	SDCS-PIN-48	330730-080-02-00	6AV6545-0CC10-0AX0
MMS6410	PM511V083BSE011180R1	330173-00-18-10-02-00	6ES7407-0DA01-0AA0

Picture/ Video Request

Buying equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to buy equipment aboard and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.

With video, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

Request to for the video to view the actual piece of equipment you're interested in before purchasing. You can in close to see the labels with the serial number or the overall condition of the equipment.

It's like having the store come to you!

Request for Video/Picture

Quick Quotes :
Receive price & availability FAST from our dedicated customer service team.
Delivery :

Expedited, Freight, and International shipping available.
Warranty :
If there's a problem, we'll make it right. Your satisfaction is how we measure success!
Returns :
No hassle return policy.
Repair :
Our team of engineers are creative problem solvers who understand your challenges.
Payment :
Custom Calibration :
You give us the specs and we do the rest.
Share this page :

Tweet

Share

Share

Email Us

What Customers Are Saying

Gareth A.

We bought a Controller for our press and installed it 2 weeks ago. Easy fix for our machine and it is working perfect.

Kamal A.

We found Moore when our PXI Chassis broke, which shut down our production line. We were up and running in less than a week because they shipped overnight and talked our tech guys through the installation over the phone. Moore saved the day big time!

93%
ON-TIME DELIVERIES
50,000
SQ FT Warehouse
138
Countries Served
20+
Years In Business

Related Tags :

1734-485ASC| |ASCII Interface module

1734-8CFG| |I/O Digital Module

1734-232ASC| |ASCII Interface module

Manufacturers