1734-TOP3| |I/O Terminal Base

Brand/ Manufacturer:
Dimensions:
11.5cm*8cm*15.2cm
Weight:
0.4kg
Country of Origin: :
United States
Description:
I/O Terminal Base

Inquiry now

Mfr. Part Number:	1734-TOP3

Manufacturer:

Description:	The 1734-TOP3 is a POINT I/O Terminal Base. It has 12 Positions and a Clamp Type of Screw-Clamp.

Full Description:	The main components of this unit are its wiring block, its handle, the interlocking side pieces, the base, its Mechanical Keying, and a DIN-rail Locking Screw

plcsale@mooreplc.com + 86 18030235313 dddemi33 2851195473

The 1734-TOP3 is a POINT I/O Terminal Base. Implemented as an integrated terminal block, this terminal base (which comes in one piece) is a 12-terminal screw-clamp terminal base used for fast and efficient wiring of industrial automation field devices such as sensors and switches to the POINT I/O system.

Vertical or horizontal mounting directly on the DIN-rail is possible, with this terminal base forming backplane communication connections and distributing its field power bus. Incorrect installation of this Input/Output module can be prevented through the use of a mechanical keying setting on the base of this terminal, and its tool-less assembly process is simple and easy to follow.

The main components of this unit are its wiring block, its handle, the interlocking side pieces, the base, its Mechanical Keying, and a DIN-rail Locking Screw (Orange).

The hardware of the 1734-TOP3 terminal base can be described as having a field power bus voltage supply of 28.8 Volts of DC power or 120 to 240 Volts of AC, with a supply voltage of up to 300 Volts maximum, a maximum terminal current of 8A, a total unit size of around 49 x 12 x 168 millimeters (1.93 x 0.47 x 6.61 inches) while weighing around 79.2 grams (2.79 ounces), with a 0.25 to 2.5 millimeter wire size, (that is 22 to 14 AWG), and a screw torque of 0.6 Nm.

Use the following procedure to install the 1734-TOP3 terminal base: position the base just above the existing units, such as power supplies, and slip the base down. This will interlock its side pieces to the adjacent unit. Press the module firmly to the DIN rail until the terminal base falls into place. The locking screw must come to a horizontal position before the insertion of an I/O module. On its mechanical keying, select the number that matches the I/O module that is meant to be installed. This procedure prevents incorrect installation of an I/O module.

The POINT I/O is electrically connected to the ground over the DIN rail to the frame. Proper grounding can be achieved with a zinc plated yellow-chromate steel DIN rail. The connecting pins are labeled with the numbers 0 to 11, with their connection being determined by the I/O that will be used. No more than two conductors should be wired on any pin.

DS200PCCAG5ACB	125840-02	6ES5927-3SA12
IC200GBI001	3500/60 133819-01	6ES5928-3UA11
IC200ALG320H	88194-01	6ES5946-3UA22
IS230SRTDH2A	3500/33 149992-01	6ES5946-3UA23
IS415UCVHH1AB IS415UCVHH1A	3300/16	6ES5947-3UA22
IC697MDL654	330878-50-00	6ES5947-3UR21
IS200TPROH1B	330780-51-00	6ES5948-3UA11
IC697MDL671	3500/15 125840-01	6ES5948-3UR23
DS3800NPSE1E1G	3300/16-15-01-03-00-00-00	6ES5951-7LD21
IS200ECTBG2A	3300/50-01-00-00-00	6ES7131-4BD01-0AA0
IS200WETBJ1ABA	330730-080-00-00	6ES7132-0BL01-0XB0
IC697ALG230	3500/60	6ES7132-4BD02-0AA0
IC200MDD843	3300/48	6ES7134-4GB01-0AB0
531X305NTBACG1	3500/15 AC 127610-01	6ES7138-4CA01-0AA0
531X139APMASG2 531X139APMARM7	126632-01	6ES7153-2BA02-0XB0

Picture/ Video Request

Buying equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to buy equipment aboard and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.

With video, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

Request to for the video to view the actual piece of equipment you're interested in before purchasing. You can in close to see the labels with the serial number or the overall condition of the equipment.

It's like having the store come to you!

Request for Video/Picture

Quick Quotes :
Receive price & availability FAST from our dedicated customer service team.
Delivery :

Expedited, Freight, and International shipping available.
Warranty :
If there's a problem, we'll make it right. Your satisfaction is how we measure success!
Returns :
No hassle return policy.
Repair :
Our team of engineers are creative problem solvers who understand your challenges.
Payment :
Custom Calibration :
You give us the specs and we do the rest.
Share this page :

Tweet

Share

Share

Email Us

What Customers Are Saying

Gareth A.

We bought a Controller for our press and installed it 2 weeks ago. Easy fix for our machine and it is working perfect.

Kamal A.

We found Moore when our PXI Chassis broke, which shut down our production line. We were up and running in less than a week because they shipped overnight and talked our tech guys through the installation over the phone. Moore saved the day big time!

93%
ON-TIME DELIVERIES
50,000
SQ FT Warehouse
138
Countries Served
20+
Years In Business

Related Tags :

1734-TOP3| |I/O Terminal Base

193-EEFD | |IEC Overload Relay

07-00213-000 REV D | Control board

Manufacturers