1756-IF6CIS controllogix analog

Technical Specifications for 1756-IF6CIS
Manufacturer: Automation
Brand:
Part Number/Catalog No.:1756-IF6CIS
Series:ControlLogix
Module Type:Analog Input with current sourcing Module
Inputs:6-Point Isolated, Current Sourcing
Conversion Method:Sigma-Delta
Data format:Integer mode (left justified, 2 s complement) IEEE 32-bit floating point
Input Resolution:0-21 milliamps Range
Backplane Current (5Volts):250 milliamps
Backplane Current (24Volts):275 mA
Power Dissipation (Max):5.1 Watts at 60 Celsius
UPC:10612598292315
Removeable Terminal Blocks:1756-TBCH, 1756-TBS6H

About 1756-IF6CIS
The 1756-IF6CIS is an analog I/O module that has an input range of 0 to 20 mA. This module is used in a ControlLogix system. And functions as a sourcing current loop input module. It has Six (6) individually isolated current sourcing inputs with resolution is 16 bits or 0.34 µA/bit. It offers an internal power source for each channel but the current is limited to 28 mA. The 1756-IF6CIS requires a Removable Terminal Block (RTB) with compatible part numbers 1756-TBCH or 1756-TBS6H and this module only operates in current mode.

This module has an analog-to-digital converter (ADC) filter that removes line noise in your application in every channel. Make sure to choose the notch filter that is the closest match to the anticipated noise frequency in your application, as each filter time affects the response time of your module.

The 1756-IF6CIS also has a real-time sampling (RTS) feature that instructs the module to scan its input channels and obtain all available data that the module will multicast. The RTS period and requested packet interval (RPI) period must first be configured.

It also has an under-range/over-range detection feature that alerts operators when the isolated input module operates beyond the limits set by the input range. The module’s nominal input range is from 0 to 20 mA, with the lowest signal in range at 0 and the highest at 21. 09376 mA.

Process alarms are also configurable. When the module exceeds the high or low limits configured in each channel, the specific alarm will be triggered. It also has a rate alarm that will be triggered when the rate of change between input samples for every channel exceeds the specific trigger point for that channel. A wire off detection feature is also available for this module. This informs the system when either a wire has been removed from one of its channels or the RTB has been disconnected from the module.

The 1756-IF6CIS has a digital filter that smoothens input data noise transients. This feature is only available in applications that use the floating-point mode.

in Stock

Picture/ Video Request

It's like having the store come to you!  

Request for Video/Picture