Global industrial control system spare parts manufacturer

2080-TC2| | thermocouple module


  • Brand/ Manufacturer:

  • Dimensions:

    6cm*2cm*4cm
  • Weight:

    0.2kg
  • Country of Origin: :

    United States
  • Description:

    thermocouple module

Mfr. Part Number:

2080-TC2

Manufacturer:

 

Description:

The / Automation 2080-TC2 module is a Micro 800 series non-isolated thermocouple module. It can be connected to Micro 800 series controllers to give them the power of temperature control.

Full Description:

The 2080-TC2 non-isolated thermocouple module is a 2-channel thermocouple module. It has a rated mounting torque of 0.2 N-m. The 2080-TC2 non-isolated thermocouple module operates by digitally converting and transmitting temperature data from as many as 8 types of thermocouple sensors in any arrangement.


  plcsale@mooreplc.com    + 86 18030235313      dddemi33     2851195473

The / Automation 2080-TC2 module is a Micro 800 series non-isolated thermocouple module. It can be connected to Micro 800 series controllers to give them the power of temperature control. The 2080-TC2 non-isolated thermocouple module is a 2-channel thermocouple module. It has a rated mounting torque of 0.2 N-m. The 2080-TC2 non-isolated thermocouple module operates by digitally converting and transmitting temperature data from as many as 8 types of thermocouple sensors in any arrangement.

The 2080-TC2 by is a 2-channel, non-isolated thermocouple plug-in model that belongs to the Micro800 Specialty Plug-in Modules. It enhances the range of capabilities of a base unit controller by making temperature control possible when a Proportional Integral Derivative is used. Micro830 and Micro850 support this specialty module. It can be installed on any of the controller plug-in slots. The module unit ships with two module fastening screws, a pin-out guide wiring instructions, and one EPCOS B57869S0502F140 part, which is a passive negative temperature, non-polarized co-efficient CJC thermistor that is fixed to the plug-in. Be careful not to unscrew or remove this CJC thermistor.

The 2080-TC2 Thermocouple Plug-in Module has 12-pin female terminal blocks and supports sensors with ANSI and IEC code B, E, J, K, N, R, S, and T. It has a 14-bit resolution, a power consumption of 3.3 Volts, 40 mA, and an input impedance of 300 KΩ. It comes with a common mode rejection ratio of 100 dB at 50 to 60 Hertz, and normal mode rejection ratio of 70 dB at 50 to 60 Hertz. Using a 2.5 millimeter or 0.10-inch flat-blade screwdriver, apply terminal screw torque between 0.22 and 0.25 N-m (1.95 to 2.21 pounds on an inch). The plug-in can be wired before insertion into the controller or once it has been secured in place.

Cabling used with the 2080-TC2 Module must be shielded, twisted cores. At the controller end, the shield wire should be shorted to a chassis ground. The recommended wire size is between 0.14 and 1.0 millimeters squared (26 to 17 AWG) stranded copper wire or 0.14 to 1.5 millimeters squared (26 to 16 AWG) solid copper wire, both of which should be rated at a maximum insulation of 90 degrees Celsius (194 degrees Fahrenheit). Performance of the non-isolated module and entire setup will depend on the application, however, better noise immunity can be achieved by keeping cable length within the ideal length of ten meters. If working with configurations requiring longer cable length, use the 2085 expansion I/O modules.

 

ABB

Honeywell

1771-IXHR

3BHB012961R0001 5SHX 2645L0002

CC-PAOH01

2711C-K2M

SAFT185TBC SAFT 185 TBC 58119687

CC-PAOH01 51405039-175

1746-IO8

PFSK109 YM322001-EK

CC-PAON01 51410070-175

1769-OV16

DSQC346G 3HAB8101-8/08F

CC-PCF901

1783-US8T

3BDS008790R09

CC-PCNT01

1788-CNCR

IMRIO02

CC-PDIL01

1746-OW8

HIEE400109R1   A465 AE01

CC-PDOB01

2711P-RN6

DSQC223

CC-PFB401

1756HP-GPS

DSSR122 48990001-NK

CC-PFB801

1440-TB-C

SPBRC300

CC-PUI001 51454205-175

2711-T10C15

07KT98E2 07KT98F JR5253100R0160

CC-PWRR01

1785-LT3

SPTU 240 R2 SPTU240R2

CC-SCMB02

1769-L36ERMS

200-CICN

CC-SDOR01

1756-L61

HESG324015R1

CC-TAID01

Picture/ Video Request


Buying equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to buy equipment aboard and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.

With video, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

Request to for the video to view the actual piece of equipment you're interested in before purchasing. You can in close to see the labels with the serial number or  the overall condition of the equipment.

It's like having the store come to you!  


Request for Video/Picture

  • Quick Quotes :

    Receive price & availability FAST from our dedicated customer service team.
  • Delivery :

    Expedited, Freight, and International shipping available.

  • Warranty :

    If there's a problem, we'll make it right. Your satisfaction is how we measure success!
  • Returns :

    No hassle return policy.
  • Repair :

    Our team of engineers are creative problem solvers who understand your challenges.
  • Payment :

  • Custom Calibration :

    You give us the specs and we do the rest.
  • Share this page :

What Customers Are Saying
Gareth A.

We bought a Controller for our press and installed it 2 weeks ago. Easy fix for our machine and it is working perfect.
Kamal A.

We found Moore when our PXI Chassis broke, which shut down our production line. We were up and running in less than a week because they shipped overnight and talked our tech guys through the installation over the phone. Moore saved the day big time!
  • 93%
    ON-TIME DELIVERIES
  • 50,000
    SQ FT Warehouse
  • 138
    Countries Served
  • 20+
    Years In Business
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Let's work together
Stuck in a critical breakdown situation? Moore Automation provides a myriad of services to clients across the globe. Contact us today to find out how our experienced team can help you minimise downtime.
Contact Us

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

skype

whatsapp