5466-348 | Woodward NETCON 5000B SIO

in stock#

Brand/ Manufacturer:
Woodward
Dimensions:
2.5 cm x 24.5 cm x 26.1 cm
Weight:
0.9 kg
Country of Origin: :
USA
Description:
Woodward 5466-348 NETCON 5000B SIO

Inquiry now

Mfr. Part Number:	5466-348

Manufacturer:	Woodward

Description:	Woodward 5466-348 NETCON 5000B SIO

Full Description:	Woodward 5466-348 NETCON 5000B SIO Connect the I/O cable to the module

Status:	In stock ready for shipment

Click to get price : : plcinfo@mooreplc.com : +86 18020776786

: live:onlywnn_1 : mooreplc

Moore Automation Limited is not affiliated with or a distributor for . The depiction, description, or sale of products featuring names, trademarks, brands, and logos is for identification and/or reference purposes only and does not indicate any affiliation with or authorization by any rights holder.

1. Toggle the CPU switch to the reset position.
2. Remove the cable saddle at the top of the chassis section. The saddle can
be lifted off by removing the two screws which hold it in place.
3. Unscrew the module’s captive-screw fasteners (one at the top of the module
and the other at the bottom), and release the module by simultaneously
pressing the top module handle up and the bottom module handle down.
4. Unseat the module from the motherboard by pulling the module straight out
along the card guide slots until it is approximately 25 mm (1 inch) from the
motherboard.
5. Disconnect the I/O cable from the module, and secure the ends to avoid
damage or shorting of pins. The I/O cable uses a slide latch (to disengage,
slide the latch towards the top of the module).
6. Disconnect the I/O cable from the FTM or Relay/Discrete Input module. This
may require removal of the cable shield termination clamp that is next to an
FTM in a commercial Marine installation.
7. Install the replacement I/O cable and connect it to the FTM or
Relay/Discrete Input module, securing the end to avoid shorting or damage
to pins. Remember to install the cable shield termination clamp that is next
to an FTM in a commercial Marine installation.
8. Connect the I/O cable to the module. The I/O cable uses a slide latch (to
engage, slide the latch towards the bottom of the module). Verify that the I/O
cable is connected to the correct cable connector.
9. With even pressure exerted at the top and the bottom of the module, seat
the module into the motherboard.
10. Tighten the two captive-screw fasteners (one at the top of the module and
the other at the bottom).
11. If power was removed, reapply power.
12. Put the CPU module back in run mode.
13. Verify that the new MicroNet module is working correctly.
14. Reinstall the cable saddle.

If you need other brands products like below, please feel free write email to plcinfo@mooreplc.com

You will get Best price and Professional service (24/7)

General
Manufacturers	Woodward
Brand	Woodward
Part Number/Catalog No.	5466-348
Condition	New and Original with One year Warranty

Recommended model
ABB	CMA121 3DDE300401	LAUER	PCS812 S7 MPI
FOXBORO	FCP280 RH924YA	ABB	DSAI130
ABB	CI853K01 3BSE018103R1	Honeywell	TC-ODD321
HONEYWELL	620-0073C	ABB	086348-001
ABB	TU844 3BSE021445R1	GE	SR 469 469-P5-HI-A20
GE	IC200ALG240	ABB	PM866K01 3BSE050198R1
OPTILOGTC	OL4058		22B-D4P0N104
	1769-L30ERMS	HONEYWELL	10101/1/1
SIEMENS	6SE6440-2UD21-5AA1	WOODHEAD	SST-PFB3-PCI
HEIDENHAIN	ROC 417 ROC417		1746-IB8
ABB	AO845A		1785-L20B
Bently Nevada	330850-50-05		1764-DAT
ABB	3BHB001336R0001	Bently Nevada	1900/65A-00-01-01-00-01
KUKA	KSD1-16		2711P-RN6
ABB	AGDR-72C		25B-D017N104
Motorola	MVME712M	ABB	ZCU-14 3AXD5000005164
Schneider	140DDO35300	EPRO	PR6426/010-130 CON021
Bently Nevada	3500/70M 136449-09	SIEMENS	6AV6542-0CA10-0AX0
GE	IC752SPL013	ABB	YPK107A YT204001-CB
ABB	D2D160-CE02-11	ABB	DP840 3BSE028926R1

Picture/ Video Request
Buying equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to buy equipment aboard and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.

With video, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

Request to for the video to view the actual piece of equipment you're interested in before purchasing. You can in close to see the labels with the serial number or the overall condition of the equipment.

It's like having the store come to you!

Request for Video/Picture

Quick Quotes :
Receive price & availability FAST from our dedicated customer service team.
Delivery :

Expedited, Freight, and International shipping available.
Warranty :
If there's a problem, we'll make it right. Your satisfaction is how we measure success!
Returns :
No hassle return policy.
Repair :
Our team of engineers are creative problem solvers who understand your challenges.
Payment :
Custom Calibration :
You give us the specs and we do the rest.
Share this page :

Tweet

Share

Share

Email Us