General Electric IC693MDL748 digital I/O module

The IC693MDL748 I/O module is a GE Fanuc positive logic digital I/O module. The IC693MDL748 positive logic digital I/O module can be installed in GE Series 90-30 PLCs and it offers 8 output points with a 24 to 48 Volts DC output voltage range. The load current per point is 0.5 Amps. The module consumes 110 milliamps at 50 Volts DC. The output type is the transistor output type and the polarity is positive. There are 8 output points per common. 

The connector type on the IC693MDL748 positive logic digital I/O module is a terminal block with 20 screws which is included with the module. The terminal board on the IC693MDL748 positive logic digital I/O module is equipped with holding screws. In applications where the PLC is subjected to high levels of vibration, these screws help to protect the terminal board-to-module connections against deterioration.

To remove terminal boards on the IC693MDL748 positive logic digital I/O module, first the holding screws on the front of the board should be loosened, and then the standard IC693 terminal board removal procedure should be . To install terminal boards, the standard IC693 terminal board installation procedure should be and then the holding screws should be tightened to 8 to 10 pounds on an inch of torque.  

Picture/ Video Request

It's like having the store come to you!  

Request for Video/Picture