General Electric IC697VAL132 Converter Board

Brand/ Manufacturer:
General Electric
Dimensions:
20.2cm*13cm*20cm
Weight:
0.3kg
Country of Origin: :
USA
Description:
Converter Board

Inquiry now

Mfr. Part Number:	IC697VAL132

Manufacturer:	General Electric

Description:	The Analog-to-Digital Converter Board provides automatic scanning of 16 differential or 31 singleended analog input channels. The channels are digitized with a 12-bit resolution Analog-to-Digital Converter (ADC).
Full Description:	IC697VAL132 Isolated Scanning 12-bit, 31-Channel Analog-to-Digital Converter Board with Built-in-Test (BIT) and Screw Terminal Interface

Status:	In stock ready to ship

Sales manager: Tiffany Guan plcsale@mooreplc.com + 86 18030235313 dddemi33 2851195473

The Analog-to-Digital Converter Board provides automatic scanning of 16 differential or 31 singleended analog input channels. The channels are digitized with a 12-bit resolution Analog-to-Digital Converter (ADC). Each input is overvoltage protected and low pass filtered. The board is very easy to use; no software setup is required. After power up or system reset, the Analog-to-Digital Converter Board automatically starts scanning each of its 16 or 31 input channels. Conversion data is stored automatically in dual-port memory (RAM), making it immediately accessible from the VMEbus.

The Analog-to-Digital Converter Board provides on-board voltage references to perform an on-line or off-line built-in self-test. The input voltage range and gain are user-configurable jumpers. The VMEbus base address and the access mode are fully selectable. In short I/O space, the board can be ordered to support optional current inputs (0 to 20 mA) using 31-channel singleended inputs

Some of the distinguishing features of the Analog-to-Digital Converter Board include:
• VMEbus 6U single height format.
• 16 differential or 31 single-ended analog input channels.
• One 12-bit A/D Converter with built-in track-and-hold.
• Automatic scanning of all inputs at 40 kHz aggregate rate.
• No software initialization required to begin scanning.
• Input ranges from ±50 mV to ±10 VDC.
• Input overvoltage protection.
• Analog inputs are low pass filtered at 50 kHz when optional add-on 40 Hz low pass filter card is removed.
• Discrete wire cables.
• Input pull-down resistors prevent floating inputs. (IC697VAL134 only)
• Supports on-line and off-line Built-in-Test.
• Configurable jumper gains of x1, x10, x100. (IC697VAL134 only)
• Selectable A/D ranges of ±5 VDC, ±10 VDC, and 0 to 10 VDC.
• Data Accesses: D16, D08 (EO), D08 (O).
• Front panel LED.
• 1,000 VDC isolation between analog and digital ground.
• Optional 0 to 20, 4 to 20, and 5 to 25 mA current input range.

Yokogawa	Emerson	Bently Nevada	Honeywell
PW482-10	KJ2003X1-BB1	3500 FUTURE	MU-TAIH22 80366195-100
SB401-10	KJ1501X1-BC3	3500/05	MC-TAIH12 51304337-150
AAI143-S00	KJ2201X1-BA1	3500/05-01-01-00-00-00	MC-TAIL12 51304437-150
AAR145-S00	KJ3202X1-BA1	330106-05-30-10-02-00	MC-TPIX12 51304084-175
AAI543-S00	KJ3222X1-BA1	330104-00-09-10-02-00	MU-TPIX12 51304084-125
ADV159-P00	KJ3243X1-BA1	330104-00-08-10-02-05	51304362-100
ADV551-P00	KC3011X1-BA1	18745-03	51304286-100
ANB10D-420 S1	KJ3002X1-BG1	330180-50-00	MC-TDIY22 51204160-175
SB401-10	KJ3002X1-BB1	147663-01	TDCS3000LCN
PW482-10	KJ3001X1-BB1	125840-01	51195156-300
ADM52C-2	KJ3004X1-EA1	3500/50 133388-02	51195155-100
DP97-B	KJ4001X1-BA2	133442-01	MU-TAMR03 51309218-125
RS81-B	KJ4001X1-BE1	3500/33 149986-01	51305890-175
CP99A-A	KJ3002X1-BC1	3500/20 125744-02	51304477-100
IP91-A	KJ3002X1-BF1	3500/90 125728-01	51401642-150
FC81-A	KJ3001X1-BJ1	3500/42 125672-02	51401560-100
MX3*D	KJ4001X1-CG1	3500/42M 140734-02	MC-TAIH02 51304453-150
ST2*D	KJ4001X1-CH1	125768-01	MC-TAIL02 51304437-150
VM1*D	KJ2002X1-BA1	126615-01	MC-TAMR03 51309218-175
ST3*A	KJ3004X1-BA1	125736-01	MC-TLPA02 51309204-175
PAC*A	KJ1501X1-BB1	125840-01	MC-TAOY22 51204172-175
NM29*A	KJ4001X1-CA1	128240-01	MC-TAMT03 51309223-175
ALU4*D	KJ4001X1-CC1	125760-01	TC-IAH16I
CTL4*B	KJ4001X1-CB1	102351-04-01	8C-TAOXB1 S/N:0152303449
SIF2*A	KJ2005X1-MQ1	3300/12	CC-PAIN01 S/N:M0151855604
GD10*A	KC3011X1-BA1	3300/03	8C-PAIMA1 51454473-175
NCU4*A	KJ3202X1-BA1	3300/16	CC-PDIL01 51405040-175
MS05*B	KJ3222X1-BA1	3300/20	CC-PAIM01 51405045-175
MDK2-S1	KJ3222X1-BA1	3300空白卡	8C-PAOHA1 51454469-275
MDK1*B	KJ2003X1-BB1	3300/05-22-00-00	8C-PAIHA1 51454470-275

Picture/ Video Request

Buying equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to buy equipment aboard and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.

With video, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

Request to for the video to view the actual piece of equipment you're interested in before purchasing. You can in close to see the labels with the serial number or the overall condition of the equipment.

It's like having the store come to you!

Request for Video/Picture

Quick Quotes :
Receive price & availability FAST from our dedicated customer service team.
Delivery :

Expedited, Freight, and International shipping available.
Warranty :
If there's a problem, we'll make it right. Your satisfaction is how we measure success!
Returns :
No hassle return policy.
Repair :
Our team of engineers are creative problem solvers who understand your challenges.
Payment :
Custom Calibration :
You give us the specs and we do the rest.
Share this page :

Tweet

Share

Share

Email Us