IC693CPU331 | General Electric | CPU 331 Module

Brand/ Manufacturer:
General Electric
Dimensions:
3.8 cm x 13.0 cm x 13.0 cm
Weight:
0.2kg
Country of Origin: :
United States
Description:
CPU 331 Module

Inquiry now

Mfr. Part Number:	IC693CPU331

Manufacturer:	General Electric

Description:	The IC693CPU331 is a single slot CPU module. GE Fanuc Automation Corporation joint venture, also known as GE Automation and Control division, is the manufacturer of this module.
Contact Details:	E-mail:plcsale@mooreplc.com Skype:dddemi33 Whatsapp/Wechat:+86 18030235313 Manager: Tiffany

Status:	IN STOCK CAN SHIP THE SAME DAY

Hope we can do more business soon ! There will become your honest cooperation partners!

Processor Speed	10 MHz
I/O Points	512
Register Memory	4KBytes
Floating Point Math	No
16 BIT System	Yes
Processor	80188

Power: This CPU requires a 350-milliamp load from the power supply, which should have a rate of +5V DC. With a processor speed of 10 Megahertz, the IC693CPU331 utilizes an 80188 processor. The ambient operating temperature ranges from 0°C to 60°C or 32°F to 140°F.

Specific: The IC693CPU331 is a modular CPU, which includes the CPU, a memory chip, an integrated associated circuit chip which is soldered to a circuit board, and the backplane board. The CPU module is inserted into the backplane, which is possible because the IC693CPU331 is a plug-in module.

The user must always install the CPU module into slot 1 of the baseplate. Remote baseplate and expansion are features that Modular CPU supports. This CPU model has a scan rate per 1 K of logic, or we can say the Boolean contacts is typically 0.4 milliseconds. There is a maximum of 16K bytes of program memory available for the user. There are also 128 bits reserved for references to the System Status.

The IC693CPU331 supports multiple modes of communication including LAN with multidrop support and Ethernet. This module supports other communication modules, such as FIP, GBC, GCM, and GCM+. IC693CPU331 also supports features including override and a battery powered clock. However, interrupts are currently not supported. RAM and EEPROM or EPROM (optional) are the supported memory storage types. It is also compatible with PCM/CCM.

CPU Type	Single slot CPU module
Total Baseplates per System	5 (1 CPU baseplate + 4 expansion and/or remote)
Load Required from Power Supply	350 milliamps from +5 VDC supply
Processor Speed	10 MegaHertz
Processor Type	80188
Operating Temperature	0 to 60 degrees C (32 to 140 degrees F) ambient
Typical Scan Rate	0.4 milliseconds per 1K of logic (boolean contacts)
User Program Memory (maximum)	16K Bytes
Discrete Input Points - %I	512
Discrete Output Points - %Q	512
Discrete Global Memory - %G	1280 bits
Internal Coils - %M	1024 bits
Output (Temporary) Coils - %T	256 bits
System Status References - %S	128 bits (%S, %SA, %SB, %SC - 32 bits each)
Register Memory - %R	2048 words
Analog Inputs - %AI	128 words
Analog Outputs - %AQ	64 words
System Registers (for reference table viewing only; cannot be referenced in user logic program)	16 words (%SR)
Timers/Counters	680
Shift Registers	yes
Built-in Ports	1 (uses connector on PLC power supply). Supports SNP/SNP-X slave protocols. Requires CMM module for SNP/SNP-X master, CCM, or RTU slave support; PCM module for RTU master support.
Communications	LAN - Supports multidrop. Also supports Ethernet, FIP, Profibus, GBC, GCM, GCM+ option modules.
Override	yes
Battery Backed Clock	yes
Interrupts	no
Type of Memory Storage	RAM and optional EPROM or EEPROM
PCM/CCM Compatibility	Yes

Picture/ Video Request

Buying equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to buy equipment aboard and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.

With video, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

Request to for the video to view the actual piece of equipment you're interested in before purchasing. You can in close to see the labels with the serial number or the overall condition of the equipment.

It's like having the store come to you!

Request for Video/Picture

Quick Quotes :
Receive price & availability FAST from our dedicated customer service team.
Delivery :

Expedited, Freight, and International shipping available.
Warranty :
If there's a problem, we'll make it right. Your satisfaction is how we measure success!
Returns :
No hassle return policy.
Repair :
Our team of engineers are creative problem solvers who understand your challenges.
Payment :
Custom Calibration :
You give us the specs and we do the rest.
Share this page :

Tweet

Share

Share

Email Us