IC693MDL310 | General Electric

IC693MDL310 is a 120-volt, 0.5 Amp AC output module that offers 12 output points in two separate classes. The two classes have six points each. Each class has an isolated common which is not knotted together within the module. This is important since it permits each class to be used in different stages of AC supply. 

A 3 Amps fuse is used to safeguard every class. An RC snubber is offered to every output to safeguard against transient electrical noise coming from the power line. IC693MDL310 delivers a high degree of inrush current that enhances the outputs ability to control many inductive and incandescent loads. The AC power to run operations linked to output should be supplied from the user.

There are LED indicators located at the top of the module which indicates the on/off condition of every point. The module makes use of the first 6 LEDs listed as B1 through 6 in the bottom row for output status. 

The IC693MDL310 is also regarded as a 16-point output for output 1 to 6 and 9 to 14. The module consists of an insert between the inside and outside surface of the hinged door. The module has an output voltage range of 85 to 132 voltages AC. Its output current is 0.5 Amps per point. 

The inrush least load current is 5 Amps highest for a single cycle. The module also has an output leakage current of 3 mA maximum at 120 volts AC. The power consumed by the module is 210 mA from 5 volts bus on the backplane. Furthermore, it has an isolation of 500 volts between every class.

High Performance
Fast Servo Loop Update (1 ms for IC693APU301, 2 ms for IC693APU302).
Block Processing time under 5
elocity Feed forward and Position Error Integrator to enhance tracking
High resolution of programming units. Position: -8,388,608...+8,388,607 User Units Velocity: 1 ... 8,388,607 User Units / sec Acceleration: 1 .. 134,217,727 User Units / sec / sec
 

Easy to Use
Simple and powerful Motion Program instruction
Simple 1- or 2-axis motion programs with synchronized block
Program support for a short motion program which can be created in Logicmaster 90 configuration
Non-volatile storage for 10 programs and 40
Motion Programmer Status Screen for servo