IC694MDL645 | General Electric | Input module

Rated Voltage: 24 volts DC

# of Inputs: 16 (1 group)

Freq: N/A

Input Current: 7 mA

Input Voltage Range:   0 to +30VDC

Power Consumption:   80 mA from 5V bus, 125 mA from 24V supply

This module provides 16 input points in 1 group with a common power input terminal.  It has discrete input and no backplane restrictions. This input module can be wired for either positive logic or negative logic. There are 16 LEDs to indicate the ON/OFF status of the respective points.

This module is compatible with many different input devices and field devices. Switches, buttons and BCD thumbwheels are examples of external input devices that are compatible with this component. The IC694MDL645 provides an interface between these devices and the PLC, allowing them to cooperate.  

The I/O module can also provide an interface between the PLC and external output modules. Such examples include interposing relays, contactors and indicator lamps. GE Fanuc has a wide range of I/O modules such as this one, which support various voltage ranges and types. 

Whatever the isolation or capacity you may need, users can find the right module to work with their application.  

IC694MDL645 is a low-voltage module, as denoted by the blue bands on the label. Users can install it in any slot of the RX3i system. When the RX3i is under power, users can insert the module into or remove it from the Universal backplane of the system. However, it must be noted that when doing this, the field side terminal block should be removed from the module.

Picture/ Video Request

It's like having the store come to you!  

Request for Video/Picture