IC697CPM914 | GE CPU module

in stock#

Brand/ Manufacturer:
GE FANUC
Dimensions:
3.5 cm x 13 cm x 13.5 cm
Weight:
0.3 kg
Country of Origin: :
USA
Description:
GE IC697CPM914 CPU module

Inquiry now

Mfr. Part Number:	IC697CPM914

Manufacturer:	GE FANUC

Description:	GE IC697CPM914 CPU module

Full Description:	GE IC697CPM914 CPU module The IC697CPM914 module is a 32-bit CPU module with floating point support. This module uses an 80486DX processor which has a clock speed of 32 megahertz. The power requirements of the module are 2.8 Amps of nominal current and 5 Volts DC voltage. The IC697CPM914 module supports up to 512 kilobytes of RAM.

Status:	In stock

Click to get price : : plcinfo@mooreplc.com : +86 18020776786

: live:onlywnn_1 : mooreplc

Moore Automation Limited is not affiliated with or a distributor for GENERAL ELECTRIC. The depiction, description, or sale of products featuring names, trademarks, brands, and logos is for identification and/or reference purposes only and does not indicate any affiliation with or authorization by any rights holder.

The IC697CPM914 module is a 32-bit CPU module with floating point support. This module uses an 80486DX processor which has a clock speed of 32 megahertz. The power requirements of the module are 2.8 Amps of nominal current and 5 Volts DC voltage. The IC697CPM914 module supports up to 512 kilobytes of RAM. The memory is battery-backed by an on-board lithium battery which can provide 6 months of memory retention. An RS-422/RS-485 compatible serial port is available on the module. This port can be used to connect to a Work Station interface in a programming computer. This serial port can also connect to a serial port on a programming computer through an RS-422 to RS-232 converter. The serial port on the IC697CPM914 module has a 15-pin D-type connector.
A parallel connection to a port on the bus transmitter module can also be used to connect the IC697CPM914 CPU module to a MS-DOS based programmer. Ethernet connections for CPU programming are also supported. The IC697CPM914 module supports up to 8000 analog I/O and 12,000 I/O in any mix. One slot is required in the PLC rack for the installation of the CPU module. Four status LEDs provide status updates. The programming and configuration of the IC697CPM914 module needs to be performed through software because the CPU does not have DIP switches for configuration. Several optional modules are supported including Ethernet, coprocessor, bus controller, and I/O modules. The recommended working temperature range for the module is from 0 to 60 degrees Celsius. The recommended range for relative humidity is from 5 to 95%.

If you need other brands products like below, please feel free write email to plcinfo@mooreplc.com

You will get Best price and Professional service (24/7)

Brand	GE Fanuc
Series	Series 90-70
Part Number	IC697CPM914
Product type	CPU module
Compatibility	GE Fanuc 90-70 PLCs
Current draw	2.8 Amps
Voltage input	5 Volts DC
Clock speed	32 megahertz
Microprocessor	80486DX
Serial port	1
Analog I/O supported	8000

Recommended model
GE	IS215UCVEH2A	ABB	TK811V050
	6186M-15PT	NEC	FC-9801F
SIEMENS	6ES7321-1BL00-9AM0		1746-IG16
	1771-IFF/A	EMERSON	PR6423/002-030 CON021
B&R	7CP474.60-1	ABB	SD822
GE	HE693STP101E	ABB	NINT-42C
Schneider	VX4RZD303	GE	IC694ALG392
	1785-KA		440R-H23178
ABB	WT98	CISCO	MGBSX1
GE	IC697MDL653	Fanuc	AOR16G A03B-0819-C161
ABB	UF C760 BE42 3BHE004573R0042	SIEMENS	6SN1123-1AA00-0AA1
ABB	83SR04/R1411		1785-LTB
	1762-IF20F2	GE	IC660BRD020
INDEL AG	INFO-4KP 94161	EPRO	PR9268/302-000
HONEYWELL	51199932-200	EMERSON	PR6423/01M-010 CON021
GE	12BDD15B11A	GE	IS220PAOCH1B
MODICON	AS-BADU-206	GE	IC693MDL730E
SIEMENS	6ES7416-2XK01-0AB0		2711P-RP1
D-LINK	DGS-1016C	GE	IS220PSCAH1B
PROSOFT	MVI69-AFC	Bently Nevada	3500/32

Picture/ Video Request
Buying equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to buy equipment aboard and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.

With video, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

Request to for the video to view the actual piece of equipment you're interested in before purchasing. You can in close to see the labels with the serial number or the overall condition of the equipment.

It's like having the store come to you!

Request for Video/Picture

Quick Quotes :
Receive price & availability FAST from our dedicated customer service team.
Delivery :

Expedited, Freight, and International shipping available.
Warranty :
If there's a problem, we'll make it right. Your satisfaction is how we measure success!
Returns :
No hassle return policy.
Repair :
Our team of engineers are creative problem solvers who understand your challenges.
Payment :
Custom Calibration :
You give us the specs and we do the rest.
Share this page :

Tweet

Share

Share

Email Us