VM600 IOC4T Vibro-Mete 200-560-000-113 I/O MODULE

Brand/ Manufacturer:
Vibro-Meter
Dimensions:
12.7cm*5.1cm*17.8cm
Weight:
0.4kg
Country of Origin: :
Switzerland
Description:
Input/Output Card

Inquiry now

Mfr. Part Number:	VM600 IOC4T 200-560-000-113

Manufacturer:	Vibro-Meter

Description:	The IOC4T input /output card acts as a signal interface for the VM600 series MPC4 machinery protection card, from Meggitt’s Vibro-Meter® product line. It is installed in the rear of a VM600 rack and connects directly to the rack backplane via two connectors.

Full Description:	VM600 is a machinery protection system with high channel density for complex installations. Dynamic inputs from proximity probes, accelerometers, velocity, dynamic pressure, and ice detection sensors are fed into standard 19-inch, 6U racks.


Status:	In stock ready to ship

plcsale@mooreplc.com + 86 18030235313

dddemi33 2851195473

IOC4T card
The IOC4T input /output card acts as a signal interface for the VM600 series MPC4 machinery protection card, from Meggitt’s Vibro-Meter® product line. It is installed in the rear of a VM600 rack and connects directly to the rack backplane via two connectors.

Each IOC4T card is associated with a corresponding MPC4 card and is mounted directly behind it in the VM600 rack (ABE04x or ABE056). The IOC4T operates in slave mode and communicates with the MPC4, through connector P2, using an Industry Pack (IP) interface.

The front panel of the IOC4T (rear of the VM600 rack) contains terminal strip connectors for wiring to the transmission cables coming from measurement chains (sensors and /or signal conditioners). The screw-terminal connectors are also used to input all signals from and output all signals to any external control system.

The IOC4T card protects all inputs and outputs against electromagnetic interference (EMI) and signal surges and also meets electromagnetic compatibility (EMC) standards.

The IOC4T connects the raw dynamic (vibration) and speed signals from the sensors to the MPC4. These signals, once processed, are passed back to the IOC4T and made available on the terminal strip on its front panel (rear of VM600). For the dynamic signals, four on-board digital-to-analog converters (DACs) provide calibrated signal outputs in the range 0 to 10 V. In addition, four on board voltage-to-current converters allow the signals to be provided as current outputs in the range 4 to 20 mA (jumper selectable).

The IOC4T contains four local relays that can be attributed to any specific alarm signals under software control. For example, these may be used to signal an MPC4 fault or a problem detected by a common alarm (Sensor OK, Alarm and Danger) in a typical application.

	ABB	Honeywell
1771-IXHR	3BHB012961R0001 5SHX 2645L0002	CC-PAOH01
2711C-K2M	SAFT185TBC 58119687	CC-PAOH01 51405039-175
1746-IO8	PFSK109 YM322001-EK	CC-PAON01 51410070-175
1769-OV16	DSQC346G 3HAB8101-8/08F	CC-PCF901
1783-US8T	3BDS008790R09	CC-PCNT01
1788-CNCR	IMRIO02	CC-PDIL01
1746-OW8	HIEE400109R1 A465 AE01	CC-PDOB01
2711P-RN6	DSQC223	CC-PFB401
1756HP-GPS	DSSR122 48990001-NK	CC-PFB801
1440-TB-C	SPBRC300	CC-PUI001 51454205-175
2711-T10C15	07KT98E2 07KT98F JR5253100R0160	CC-PWRR01
1785-LT3	SPTU 240 R2 SPTU240R2	CC-SCMB02
1769-L36ERMS	200-CICN	CC-SDOR01
1756-L61	HESG324015R1	CC-TAID01

Picture/ Video Request

Buying equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to buy equipment aboard and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.

With video, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

Request to for the video to view the actual piece of equipment you're interested in before purchasing. You can in close to see the labels with the serial number or the overall condition of the equipment.

It's like having the store come to you!

Request for Video/Picture

Quick Quotes :
Receive price & availability FAST from our dedicated customer service team.
Delivery :

Expedited, Freight, and International shipping available.
Warranty :
If there's a problem, we'll make it right. Your satisfaction is how we measure success!
Returns :
No hassle return policy.
Repair :
Our team of engineers are creative problem solvers who understand your challenges.
Payment :
Custom Calibration :
You give us the specs and we do the rest.
Share this page :

Tweet

Share

Share

Email Us