CAT1203-GK5 | | Module

Brand/ Manufacturer:
Dimensions:
17.5cm*8cm*15.2cm
Weight:
0.4kg
Country of Origin: :
United States
Description:
Module

Inquiry now

Mfr. Part Number:	CAT1203-GK5

Manufacturer:

Description:	The 1203-GK5 Module has an input voltage of 12-25 volts DC and an input current of 110 milliamps. The SCANport load on the 1203-GK5 is 60 milliamps. Baud rates for the 1203-GK5 are 125, 250, and 500 k BPS.

Full Description:	The 1203-GK5 module mounts on a DIN rail system and connects to SCANport products with the use of a SCANport cable. Some features on the module include DIP switches to enable the user to configure the module before connecting it to the DeviceNet network

plcsale@mooreplc.com + 86 18030235313 dddemi33 2851195473

The 1203-GK5 Module has an input voltage of 12-25 volts DC and an input current of 110 milliamps. The SCANport load on the 1203-GK5 is 60 milliamps. Baud rates for the 1203-GK5 are 125, 250, and 500 k BPS.

The 1203-GK5 module mounts on a DIN rail system and connects to SCANport products with the use of a SCANport cable. Some features on the module include DIP switches to enable the user to configure the module before connecting it to the DeviceNet network.

The module also has a Faulted Node Recovery system, enabling one to change the node address of a device. The user fault response configuration allows the user to customize the adapter actions to communication errors, and LEDs aid in diagnosing network and SCANport health.

Required tools and equipment to set up the 1203-GK5 are as follows: DeviceNet communications module (1203-GK5), either a 5-pin or 10-pin plug-in connector, 35 x 7.5 mm DIN rail, 1/8” flathead screwdriver, and appropriate cables for SCANport and DeviceNet connections.

Specifications for the 1203-GK5 module include an input voltage of 12 to 25 V DC, an input current of 110 mA, and a SCANport load of 60 mA. Environmental specifications include an operating temperature to be kept between 0 and 50 Degrees (C), a storage temperature to be kept between -40 and 85 Degrees (C), and a relative humidity to be kept between 0 and 95% (non-condensing). Baud rates for communication specifications are as follows: 125, 250, and 500 k BPS. The mechanical dimensions of the device include a height of 76 mm (3.0 in.), a width of 45 mm (1.8 in.), a depth of 123 mm (4.8 in.), a NEMA Type 1 enclosure, and a DIN Rail Standard of 35 mm x 7.5 mm (1.38 in. x 0.30 in.).

PW482-10	KJ2003X1-BB1	3500 FUTURE	MU-TAIH22 80366195-100
SB401-10	KJ1501X1-BC3	3500/05	MC-TAIH12 51304337-150
AAI143-S00	KJ2201X1-BA1	3500/05-01-01-00-00-00	MC-TAIL12 51304437-150
AAR145-S00	KJ3202X1-BA1	330106-05-30-10-02-00	MC-TPIX12 51304084-175
AAI543-S00	KJ3222X1-BA1	330104-00-09-10-02-00	MU-TPIX12 51304084-125
ADV159-P00	KJ3243X1-BA1	330104-00-08-10-02-05	51304362-100
ADV551-P00	KC3011X1-BA1	18745-03	51304286-100
ANB10D-420 S1	KJ3002X1-BG1	330180-50-00	MC-TDIY22 51204160-175
SB401-10	KJ3002X1-BB1	147663-01	TDCS3000LCN
PW482-10	KJ3001X1-BB1	125840-01	51195156-300
ADM52C-2	KJ3004X1-EA1	3500/50 133388-02	51195155-100
DP97-B	KJ4001X1-BA2	133442-01	MU-TAMR03 51309218-125
RS81-B	KJ4001X1-BE1	3500/33 149986-01	51305890-175
CP99A-A	KJ3002X1-BC1	3500/20 125744-02	51304477-100
IP91-A	KJ3002X1-BF1	3500/90 125728-01	51401642-150
FC81-A	KJ3001X1-BJ1	3500/42 125672-02	51401560-100
MX3*D	KJ4001X1-CG1	3500/42M 140734-02	MC-TAIH02 51304453-150
ST2*D	KJ4001X1-CH1	125768-01	MC-TAIL02 51304437-150
VM1*D	KJ2002X1-BA1	126615-01	MC-TAMR03 51309218-175
ST3*A	KJ3004X1-BA1	125736-01	MC-TLPA02 51309204-175
PAC*A	KJ1501X1-BB1	125840-01	MC-TAOY22 51204172-175
NM29*A	KJ4001X1-CA1	128240-01	MC-TAMT03 51309223-175
ALU4*D	KJ4001X1-CC1	125760-01	TC-IAH16I
CTL4*B	KJ4001X1-CB1	102351-04-01	8C-TAOXB1 S/N:0152303449
SIF2*A	KJ2005X1-MQ1	3300/12	CC-PAIN01 S/N:M0151855604
GD10*A	KC3011X1-BA1	3300/03	8C-PAIMA1 51454473-175
NCU4*A	KJ3202X1-BA1	3300/16	CC-PDIL01 51405040-175
MS05*B	KJ3222X1-BA1	3300/20	CC-PAIM01 51405045-175
MDK2-S1	KJ3222X1-BA1	3300空白卡	8C-PAOHA1 51454469-275
MDK1*B	KJ2003X1-BB1	3300/05-22-00-00	8C-PAIHA1 51454470-275

Picture/ Video Request

Buying equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to buy equipment aboard and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.

With video, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

Request to for the video to view the actual piece of equipment you're interested in before purchasing. You can in close to see the labels with the serial number or the overall condition of the equipment.

It's like having the store come to you!

Request for Video/Picture

Quick Quotes :
Receive price & availability FAST from our dedicated customer service team.
Delivery :

Expedited, Freight, and International shipping available.
Warranty :
If there's a problem, we'll make it right. Your satisfaction is how we measure success!
Returns :
No hassle return policy.
Repair :
Our team of engineers are creative problem solvers who understand your challenges.
Payment :
Custom Calibration :
You give us the specs and we do the rest.
Share this page :

Tweet

Share

Share

Email Us

What Customers Are Saying

Gareth A.

We bought a Controller for our press and installed it 2 weeks ago. Easy fix for our machine and it is working perfect.

Kamal A.

We found Moore when our PXI Chassis broke, which shut down our production line. We were up and running in less than a week because they shipped overnight and talked our tech guys through the installation over the phone. Moore saved the day big time!

93%
ON-TIME DELIVERIES
50,000
SQ FT Warehouse
138
Countries Served
20+
Years In Business

Related Tags :

CAT1203-GK5 | | Module

1336S-B025-AA-EN4 | | Drive Module

1771-A2B/B | | PLC-5 8 Slot Chassis

Manufacturers