IC695ALG508 | General Electric

Module Type:

RTD Input Module

No of Inputs:

8 Differential Inputs

Internal Power:

3.3V: 400mA;  5.1V: 200 mA

Number of Slots:

1 (single slot)

Range (ohms):

250/500/1000/2000/3000/4000

Power Dissapation:

2.5W max

The RTD input module's main objective is to enable the direct connection of 2-wire and 3-wire RTD temperature sensors without the need for using external signal-processing devices such as transducers and transmitters. All the processing of the RTD signals is performed by using this module. The GE Fanuc Automation IC695ALG508 isolated RTD input module comes with 8 isolated RTD input channels. Each one of these channels can be individually configured for different RTD or resistance applications.

The lifecycle status of the GE Fanuc Automation IC695ALG508 isolated RTD input module is active and the module type is also resistive, providing channel to channel isolation. The module uses a universal backplane and a PCI bus as backplane support, and it occupies one slot of the rack. 

The GE Fanuc Automation IC695ALG508 isolated RTD input module can perform full diagnostics for errors such as open wire and short circuit errors, and it has a positive and negative rate of change and high and low alarms. The channel to channel isolation rating is 250 Volts AC continuous and 1500 Volts AC for 1 minute. 

The module does not include a notch filter and it has a calibrated accuracy of 0,5% at a temperature of 25 degrees Celsius. The resolution of the module is 32 bits standard with a floating-point data format or 16 bits with an integer input data format. The module does not provide input impedance and it does not require the use of another I/O module.

Picture/ Video Request

It's like having the store come to you!  

Request for Video/Picture