IC695PBS301 | General Electric

Brand/ Manufacturer:
General Electric
Dimensions:
2.9 cm x 12.7 cm x 13.0 cm
Weight:
0.3kg
Country of Origin: :
United States
Description:
Profibus Slave Module

Inquiry now

Mfr. Part Number:	IC695PBS301

Manufacturer:	General Electric

Description:	GE Boards & Turbine Control Mark IC695PBS301 - In Stock & Ready To Ship!

Contact Details:	E-mail:plcsale@mooreplc.com Skype:dddemi33 Whatsapp/Wechat:+86 18030235313 Manager: Tiffany

Status:	IN STOCK CAN SHIP THE SAME DAY

Hope we can do more business soon ! There will become your honest cooperation partners!

Module Type: Profibus Slave Module
LEDs: PROFIBUS OK, NETWORK, MOD STATUS
Backplane Support: Universal
# of Slots: 1 (single slot)
Ports: 9-pin connector
Power Consumption: 440 mA @ 3.3 VDC

The IC695PBS301 is a Profibus Slave Module from the GE Fanuc RX3i Series. This module provides slave communications on a PROFIBUS DP network. See specifications for this unit on IC695PBS301's website page.

Customer Questions and Answers

Question: What is an IC695PBS301? Answer: IC695PBS301 is a Profibus Slave Module from the GE Fanuc RX3i Series.

Question: What does IC695PBS301 do for the RX3i system? Answer: This module provides slave communications on a PROFIBUS DP network.

Question: How does the IC695PBS301 operate? Answer: The slave module automatically exchanges data with a master device. It can only acknowledge received messages or transmit messages to a master upon request.

Question: What are some of the operating features? Answer: Ability to read up to 244 bytes of input data from the network, and send up to 244 bytes of output data

Support for all standard PROFIBUS data rates
Support for DP-V1 Read, Write and Alarm messages
PROFIBUS-compliant module and network status LEDs

Question: Where must IC695PBS301 be located? Answer: IC695PBS301 can be installed in any available backplane slot.

Question: What should I do if my IC695PBS301 is not working properly? Answer: Your IC695PBS301 may need repair.

For more information on the IC695PBS301 Profibus Slave Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.

CPU Performance	For CPU315 performance data, refer to Appendix A of the PACSystems CPU Reference Manual, GFK-2222W or later.
Battery: Memory retention	For battery selection, installation and estimated life, refer to the PACSystems RX3i and RX7i Battery Manual, GFK-2741
Program storage	Up to 20 MB of battery-backed RAM 20 MB of non-volatile flash user memory
Power requirements	+3.3 Vdc: 1.0 Amps nominal +5 Vdc: 1.2 Amps nominal
Operating Temperature	0 to 60°C (32°F to 140°F)
Floating point	Yes
Time of Day Clock accuracy	Maximum drift of 2 seconds per day
Elapsed Time Clock (internal timing) accuracy	0.01% maximum
Embedded communications	RS-232, RS-485
Serial Protocols supported	Modbus RTU Slave, SNP, Serial I/O
Backplane	Dual backplane bus support: RX3i PCI and high-speed serial bus
PCI compatibility	System designed to be electrically compliant with PCI 2.2 standard
Program blocks	Up to 512 program blocks. Maximum size for a block is 128KB.
Memory	%I and %Q: 32Kbits for discrete %AI and %AQ: configurable up to 32Kwords %W: configurable up to the maximum available user RAM Symbolic: configurable up to 20 Mbytes

Picture/ Video Request

Buying equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to buy equipment aboard and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.

With video, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

Request to for the video to view the actual piece of equipment you're interested in before purchasing. You can in close to see the labels with the serial number or the overall condition of the equipment.

It's like having the store come to you!

Request for Video/Picture

Quick Quotes :
Receive price & availability FAST from our dedicated customer service team.
Delivery :

Expedited, Freight, and International shipping available.
Warranty :
If there's a problem, we'll make it right. Your satisfaction is how we measure success!
Returns :
No hassle return policy.
Repair :
Our team of engineers are creative problem solvers who understand your challenges.
Payment :
Custom Calibration :
You give us the specs and we do the rest.
Share this page :

Tweet

Share

Share

Email Us