IS220PPROH1A | General Electric

Brand/ Manufacturer:
General Electric
Dimensions:
2.9 cm x 12.7 cm x 13.0 cm
Weight:
0.3kg
Country of Origin: :
United States
Description:
Mark VI

Inquiry now

Mfr. Part Number:	IS220PPROH1A

Manufacturer:	General Electric

Description:	GE Boards & Mark VI IS220PPROH1A - In Stock & Ready To Ship!

Contact Details:	E-mail:plcsale@mooreplc.com Skype:dddemi33 Whatsapp/Wechat:+86 18030235313 Manager: Tiffany

Status:	IN STOCK CAN SHIP THE SAME DAY

Hope we can do more business soon ! There will become your honest cooperation partners!

The IS220PPROH1A is a Turbine specific I/O module. It is designed to provide a direct interface to specific turbine field devices.

This setup eliminates or reduces much of the previously needed instrumentation needed to make the connection to field devices, and also improves running reliability and reduces long term maintenance.

The IS220PPROH1A typically works with the TREAH_A terminal board and is used in Aeroderivative Turbine Emergency trip applications. The component can connect to either barrier or box type terminal blocks.

The IS220PPROH1A has field wiring restrictions for voltage sensing that limits cable length to 1,000 feet of 18 AWG wiring. It is important to note the IS220PPROH1A cannot be auto-reconfigured when swapping a BPPB P-Pack with a BPPC P-Pack.

The IS220PPROH1A is built with a front faceplate that is marked with the component id number and several LED indicators. These are placed on the front faceplate in pairs. The first pair is labeled PWR/ATTN, the second LINK/TxRx and ENET 1, and the third LINK/TxRx and ENET2. A final component is located at the bottom of the faceplate; this is labeled IR Port.

The IS220PPROH1A accepts three speed signals. This includes deceleration, acceleration, and overspeed. The component also has hardware implemented overspeed. The pack monitors the status and operation of selected trip boards through a set of comprehensive feedback signals. The pack supports TMR and simplex back up protection.

The IS220PPROH1A is built with a high speed processor and two fully independent 10/100 Ethernet ports. The pack has a hardware reset circuit and watchdog timer. Temperature is monitored by an internal sensor.

CPU Performance	For CPU315 performance data, refer to Appendix A of the PACSystems CPU Reference Manual, GFK-2222W or later.
Battery: Memory retention	For battery selection, installation and estimated life, refer to the PACSystems RX3i and RX7i Battery Manual, GFK-2741
Program storage	Up to 20 MB of battery-backed RAM 20 MB of non-volatile flash user memory
Power requirements	+3.3 Vdc: 1.0 Amps nominal +5 Vdc: 1.2 Amps nominal
Operating Temperature	0 to 60°C (32°F to 140°F)
Floating point	Yes
Time of Day Clock accuracy	Maximum drift of 2 seconds per day
Elapsed Time Clock (internal timing) accuracy	0.01% maximum
Embedded communications	RS-232, RS-485
Serial Protocols supported	Modbus RTU Slave, SNP, Serial I/O
Backplane	Dual backplane bus support: RX3i PCI and high-speed serial bus
PCI compatibility	System designed to be electrically compliant with PCI 2.2 standard
Program blocks	Up to 512 program blocks. Maximum size for a block is 128KB.
Memory	%I and %Q: 32Kbits for discrete %AI and %AQ: configurable up to 32Kwords %W: configurable up to the maximum available user RAM Symbolic: configurable up to 20 Mbytes

Picture/ Video Request

Buying equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to buy equipment aboard and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.

With video, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

Request to for the video to view the actual piece of equipment you're interested in before purchasing. You can in close to see the labels with the serial number or the overall condition of the equipment.

It's like having the store come to you!

Request for Video/Picture

Quick Quotes :
Receive price & availability FAST from our dedicated customer service team.
Delivery :

Expedited, Freight, and International shipping available.
Warranty :
If there's a problem, we'll make it right. Your satisfaction is how we measure success!
Returns :
No hassle return policy.
Repair :
Our team of engineers are creative problem solvers who understand your challenges.
Payment :
Custom Calibration :
You give us the specs and we do the rest.
Share this page :

Tweet

Share

Share

Email Us